The VE803 HDMI USB Extender extends an HDMI signal up to 60 meters from the HDMI source using two Cat 5e cables. It is capable of sending 1080i signals up to 60 meters and 1080p signals up to 40 meters. The VE803 is equipped with USB connectors which allow you to extend any USB device between the units. The USB feature also provides support for touch panel control, allowing you to control the local HDMI source device from the remote display, or control the remote display through the local unit. The VE803 is ideal for transportation centers, medical facilities, shopping malls or anywhere touch panel control or a kiosk is required. For flexibility and convenience, the VE803 local unit can be powered via the USB cable when connected to an appropriate source device. The VE803 is HDCP compliant, providing an easy and ideal HDMI extender solution for any application.

• Uses two Cat 5e cables to connect the local and the remote units
• Extends 1080p by 40m; extend 1080i by 60m
• Superior video quality – HDTV resolutions of 480p, 720p, 1080i, 1080p (1920 x 1080), VGA, SVGA, XGA, SXGA, UXGA and WUXGA (1920 x 1200)
• Supports USB touch panel
• 8 segment equalization adjustment switch optimizes display quality
• Support Dolby True HD and DTS HD Master Audio
• Built-in 8KV/15KV ESD protection
• Transparent USB Support – supports all USB 2.0 full speed device (up to 12 Mbps)
• Supports wide screen formats
• HDMI (3D, Deep Color); HDCP compatible – signaling rates up to 2.25Gbits
• Powered local unit via USB cable
• Video Input: Interface: 1x HDMI Type A Female (Black), Impedance 100 Ohms
• Video Output: Interface: 1 x HDMI Type A Female (Black), Impedance 100 Ohms
• Video: Max. Data Rate: 6.75 Gbps (2.25 Gbps Per Lane), Max. Pixel Clock: 225MHz, Compliance: HDMI (3D, Deep Color), HDCP Compatible / Max Resolutions/Distance: Up to 1080p@40m and 1080i@60m
• Audio: Input: 1x HDMI Type A Female (Black), Output: 1x HDMI Type A Female (Black)
• Control: USB: VE803T: 1x USB Type B Female / VE803R: 1x USB Type A Female
• EDID Settings: EDID Mode = Default
• Power Connector: 1x DC Jack / Consumption: VE803T: 5VDC, 1W & VE803R: 5VDC, 3,9W
• Environment: Operating Temp. 0~50°C, Storage Temp. -20~60°C, Humidity 0~80% RH, Non-Condensing
• Physical Properties: Housing Metal, Weight 0.16kg, Dimensions (LxWxH / x2): 9x5.74x2.4cm

This easy to use adapters provides the audio signals through patch cables, so audio can even be transported via a passive structured cabling from room to room (without active network devices).

• Set of 2 adapters, transmitter and receiver
• 2x RCA male plug to RJ45 female port
• max. patch cable length 50m, depending on wire diameter and contact resistance
• for analog stereo audio signals
• adapters cable length: 2x 10cm

UCE260 can easily send the USB signals via Ethernet Cable up to 60 meters (196 ft) at data rate of High Speed (480Mb/s) , Full Speed (12Mb/s) and Low Speed (1.5Mb/s). Without any configuration or software driver, this USB extender allows you to extend your USB device or hub up to 60m from your computer, which overcomes the typical USB cable limitation.

• Supports any High-Speed (480Mb/s), full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB devices
• Extends signal transmission distance of a USB devices up to 60m via an Ethernet Cable
• Includes an AC adapter to stabilize power supply
• Hot-Pluggable
• The most cost-effective USB extender solution
• No additional software driver required

Package Contents

• 1x Local Unit with USB Cable
• 1x Remote Unit
• 1x Power Adapter (5V, 2.6A)
• 1x User Instructions

Function	Local Unit	Remote Unit
Connectors
USB Port	1 x USB Type A Male	1 x USB Type A Female
Link	1 x RJ45 Female	1 x RJ45 Female
Power	N/A	1 x DC Power Jack
USB Specification	2.0 For High / Full / Low Speed	2.0 For High / Full / Low Speed
USB Devices Supported	N/A	1 Device ?Note?Please verify the compatibility of the USB video device with the manufacturer.
Power Consumption	DC5V:0.65W:3BTU/h Note: ? The measurement in Watts indicates the typical power consumption of the device with no external loading. ? The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.	DC5V:0.95W:15BTU/h Note: ? The measurement in Watts indicates the typical power consumption of the device with no external loading. ? The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Environmental
Operating Temperature	0–40°C	0–40°C
Storage Temperature	-20–60°C	-20–60°C
Humidity	0–80% RH, Non-condensing	0–80% RH, Non-condensing
Physical Properties
Housing	Plastic	Plastic
Weight	0.04 kg ( 0.09 lb )	0.02 kg ( 0.05 lb )
Dimensions (L x W x H)	6.30 x 3.10 x 2.19 cm (2.48 x 1.22 x 0.86 in.)	6.30 x 3.10 x 2.19 cm (2.48 x 1.22 x 0.86 in.)

InLine® VGA + Audio Extender Receiver max. 300m via UTP / STP network Cable RJ45

• Extend VGA video and stereo audio signal max up to 300m over one UTP cable with cross stand inside
• Adjusting GAIN and PEAK to adapt for the different length of network patch cable, GAIN: Brightness adjustment, PEAK: Skew adjustment
• Supports resolution max up to 1920 x 1200
• Interface: 1 VGA output,1 3.5 mm jack output, 1 UTP input
• Work with monitors, projectors, HDTV and flat panels

• Extend and split VGA video and stereo audio signal max up to 300m over one UTP cable with cross stand inside
• Adjusting GAIN and PEAK to adapt for the different length of network patch cable, GAIN: Brightness adjustment, PEAK: Skew adjustment
• Supports resolution max up to 1920 x 1200
• Dual output at local unit: 1 x VGA output for local site, plus 2 x UTP output for remote site
• Work with monitors, projectors, HDTV and flat panels

This easy to use adapters provides the audio signals through patch cables, so audio can even be transported via a passive structured cabling from room to room (without active network devices).

• Set of 2 adapters, transmitter and receiver
• 2x RCA male plugs to RJ45 female port + 1x 3.5 mm stereo plug to RJ45 female port
• max. patch cable length 50m, depending on wire diameter and contact resistance
• for analog stereo audio signals
• adapters cable length: 2x 10cm

This easy to use adapters provides the audio signals through patch cables, so audio can even be transported via a passive structured cabling from room to room (without active network devices).

• Set of 2 adapters, transmitter and receiver
• 2x 3.5 mm stereo plug to RJ45 female port
• max. patch cable length 50m, depending on wire diameter and contact resistance
• for analog stereo audio signals
• adapters cable length: 2x 10cm

The UCE3250 4-port USB 2.0 Cat 5 Extender is a two-unit device that serves as a USB hub and a USB extender. The UCE3250 unit can connect as many as 4 USB peripherals from up to 50 meters away from your computer over a Cat 5 / 5e / 6 Ethernet cable.

The UCE3250 transmits data through signal packages with better compatibility and preserves the integrity of the data over long distances. The power supply at the remote UCE3250 unit helps provide suffi cient power to any type of USB device, such as flash drives, Keyboards, mice, webcams, scanners, or printers, etc.

With its durable metal housing, this high-quality USB extender provides a fast and fl exible solution for industrial applications. In addition, the compact size and integrated wall mounting enables space-saving installation.

• High-Speed USB 2.0 compliant with a data transfer rate of up to 480 Mbps
• Extension distance of up to 50m over a Cat 5/5e/6 cable
• Receives up to 4 USB peripherals of all types – flash drives, keyboards, mice, webcams, scanners, printers and more
• Metal mechanical with wall mount design supports industrial deployment
• Supports Windows, MacOS and Linux
• Plug- and- play

Package Contents:1x UCE3250L 4-port USB 2.0 CAT 5 Extender (Local unit)1x UCE3250R 4-port USB 2.0 CAT 5 Extender (Remote unit)1x USB Type-A Male to Type-B Male Cable1x Power Adapter1x User lnstructions

Device:	UCE3250L	UCE3250R
Connectors
USB Port	1 x USB Type B Female	4 x USB Type A Female
Link	1 x RJ45 Female	1 x RJ45 Female
Power	N/A	1 x DC Jack
USB Specification	2.0 / 1.1 High / Full / Low Speed	2.0 / 1.1 High / Full / Low Speed
USB Devices Supported	N/A	4 Devices
Power Consumption
Power Consumption	Bus-Powered	Self-Powered, 5V, 13W
Environmental
Operating Temperature	0–50°C	0–50°C
Storage Temperature	-20–70°C	-20–70°C
Humidity	0–80% RH, Non-condensing	0–80% RH, Non-condensing
Physical Properties
Weight	0.09 kg ( 0.2 lb )	0.16 kg ( 0.35 lb )
Housing	Metal	Metal
Dimensions (L x W x H)	6.70 x 6.02 x 2.37 cm (2.64 x 2.37 x 0.93 in.)	6.33 x 11.04 x 2.41 cm (2.49 x 4.35 x 0.95 in.)
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

UCE60 lets you locate your USB device or hub up to 60m (198 ft) from your computer, overcoming the typical USB cable limitation. It conditions the USB signals to communicate up to 60m using low-cost Ethernet cable.

• USB 2.0 full speed compliant
• Provides support for any full-speed (12Mb/s) or low-speed (1.5Mb/s) USB devices
• Extends the transmission distance of a USB device up to 60m (198 ft) using Ethernet cable
• Embedded USB Transceivers prevent signal loss
• Lowest cost solution for extending USB signals
• No additional installation software required
• LED indicates when additional external power supply needed
• Multiplatform support: Windows, Mac

Package Contents

• 1x Local Unit (1 ft USB Cable attached)
• 1x Remote Unit

Function	Local Unit	Remote Unit
Connectors
USB Port	1 x USB Type A Male (White)	1 x USB Type A Female (White)
Link	1 x RJ-45 Female	1 x RJ-45 Female
Power	N/A	1 x DC Jack (Optional)
USB Specification	2.0 Full / Low Speed	2.0 Full / Low Speed
Environmental
Operating Temperature	0–40°C	0–40°C
Storage Temperature	-40–85°C	-40–85°C
Humidity	0–80% RH, Non-condensing	0–80% RH, Non-condensing
Physical Properties
Housing	Plastic	Plastic
Weight	0.03 kg ( 0.09 lb )	0.02 kg ( 0.05 lb )
Dimensions (L x W x H)	6.30 x 3.10 x 2.19 cm (2.48 x 1.22 x 0.86 in.)	6.30 x 3.10 x 2.19 cm (2.48 x 1.22 x 0.86 in.)

VE150A video extender comprises a local transmitting unit and a remote receiving unit which are connected by standard Cat 5e cables. The distance of both units can be extended up to 150m. It is ideal for factories and construction sites, or any location where the display may need to expose in a risky setting, but you want the system to be kept in a safe location.

• Uses Cat 5e cables to connect the local and remote units
• Supports one local and one remote display
• Long distance transmission – up to 150 m
• Adjustable gain control – manually adjust signal strength to compensate for distance
• Superior video quality – up to 1920x1200 (30 m);1600x1200 (100 m); 1280x1024 (150 m)
• Supports VGA, XGA, SVGA, UXGA, WUXGA, and multisync monitors
• Supports wide screen formats
• Supports hot-plugging
• Built-in 8KV/15KV ESD protection
• Supports DDC for the local monitor
• Easy installation
• Rack Mountable
• Plug-and-play – no software installation required

Package Contents

• 1x VE150AT Video Extender (Local unit)
• 1x VE150AR Video Extender (Remote unit)
• 2x Power Adapters
• 1x VGA Cable (1.8m/6ft)1x Mounting Kit
• 1x User Instructions

VE150AR	VE150AT
Video Input
Interfaces	N/A	1 x HDB-15 Male (Blue)
Impedance	N/A	75 O
Max. Distance	N/A	1.8 m
Video Output
Interfaces	1 x HDB-15 Female (Blue)	1 x HDB-15 Female (Blue)
Impedance	75 O	75 O
Video
Max. Bandwidth	300 MHz	300 MHz
Max. Resolutions / Distance	Up to 1920 x 1200@30m; 1280 x 1024@150m	Up to 1920 x 1200@30m; 1280 x 1024@150m
Connectors
Power	1 x DC Jack	1 x DC Jack
Power Consumption	DC5.3V:0.87W:8BTU/h Note: ? The measurement in Watts indicates the typical power consumption of the device with no external loading. ? The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.	DC5.3V:1.35W:11BTU/h Note: ? The measurement in Watts indicates the typical power consumption of the device with no external loading. ? The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Environmental
Operating Temperature	0 - 50°C	0 - 50°C
Storage Temperature	-20 - 60°C	-20 - 60°C
Humidity	0 - 80% RH, Non-Condensing	0 - 80% RH, Non-Condensing
Physical Properties
Dimensions (L x W x H)	12.77 x 9.04 x 2.26 cm (5.03 x 3.56 x 0.89 in.)	12.77 x 9.04 x 2.26 cm (5.03 x 3.56 x 0.89 in.)
Housing	Metal	Metal
Weight	0.24 kg ( 0.53 lb )	0.24 kg ( 0.53 lb )
Carton Lot	5 pcs	5 pcs
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

As a complete end-to-end solution, the VE1821 comes as a kit that contains a transmitter and a receiver, extending HDMI signals at 4096 x 2160 / 3840 x 2160 @ 30 Hz (4 : 4 : 4) up to 40 m via a Cat 6 cable (ATEN 2L-2910 recommended). Crystal-clear video presentation is guaranteed thanks to its capability of transmitting 4K sources without latency. Meanwhile, it supports lossless audio formats, such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio, to add superior sound to the video content, enhancing the experience for the viewers.Designed to optimize installation flexibility, the VE1821 features an ultra lightweight, palm-sized enclosure, perfect for mounting or placement in tight spaces. The transmitter includes a local HDMI output port, allowing for cascading purposes or for users to monitor the UHD signal being extended to the receiver. With the built-in EDID switch, users can control which EDID is taken from either display. Plus, the HDMI source can be displayed at the optimal resolution based on the capabilities of the connected display through the EDID Copying Mode. As a result of the IR transmission functionality, the source device connected to the transmitter can be seamlessly controlled from the receiver side, assuring easy and complete control for the user. The VE1821 adopts PoC (Power over Cable) technology, which enables the transmitter to provide power to the receiver via a Cat 6 cable, eliminating the need for a bulky external power supply.With such a rich set of features, the VE1821 delivers excellent AV transmission quality and flexibility within different installation scenarios, such as meeting facilities, retail settings, entertainment systems, and more.

• Includes a transmitter and a receiver to work in tandem to extend 4K HDMI signals over a Cat 5e / 6 cable
• Ultra lightweight, palm-sized enclosure for easy mounting or placement in tight spaces
• Crystal clear 4K HDMI transmission with zero latency across up to 40 m via a Cat 6 cable (ATEN 2L-2910 recommended) /30 m via a Cat 5e cable
• Local HDMI output port on the transmitter unit – enables cascading or users to monitor the UHD signal being extended to the receiver
• Built-in EDID switch – users can control which EDID is taken from either display
• EDID Copying Mode – HDMI source can be displayed at the optimal resolution based on the capabilities of the connected display
• IR signal transmission – the source device connected to the transmitter can be seamlessly controlled from the receiver side
• PoC (Power over Cable) technology – power can be delivered from the transmitter to the receiver via a Cat 5e / 6 cable to eliminate the need for a bulky external power supply
• HDMI (3D, Deep Color, 4K); HDCP 1.4 compliant
• Built- in ESD protection
• Plug-and-play – no additional software needed

Function	VE1821R	VE1821T
Video Input
Interfaces	N/A	1 x HDMI Type A Female (Black)
Impedance	N/A	100 O
Max. Distance	N/A	3 m
Video Output
Interfaces	1 x HDMI Type A Female (Black)	1 x HDMI Type A Female (Black)
Impedance	100 O	100 O
Max. Distance	3 m	3 m
Video
Max. Data Rate	10.2Gbps (3.4Gbps per lane)	10.2Gbps (3.4Gbps per lane)
Max. Pixel Clock	340 MHz	340 MHz
Compliance	HDMI (3D, Deep Color, 4K) HDCP1.4 Compatible	HDMI (3D, Deep Color, 4K) HDCP1.4 Compatible
Max. Resolutions / Distance	Up to 4K@30m (Cat5e), 40m (Cat 6/ATEN 2L-2910); *4K supported: 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)	Up to 4K@30m (Cat5e), 40m (Cat 6/ATEN 2L-2910); *4K supported: 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)
Audio
Input	N/A	1 x HDMI Type A Female (Black)
Output	1 x HDMI Type A Female (Black)	N/A
Control
IR Channel	1 x Mini Stereo Jack Female (Black); Single way bypass channel from receiver to transmitter	1 x Mini Stereo Jack Female (Black); Single way bypass channel from receiver to transmitter
Switches
Mode Switch	N/A	EDID Mode Selection (Read EDID from Transmitter HDMI output or Receiver HDMI output)
Connectors
Power	1 x RJ-45 Female (Power over Cable, power supply from VE1821T)	1 x DC Jack (Black) with locking
Unit To Unit	1 x RJ-45 Female	1 x RJ-45 Female
Power Consumption	POC:0.87W:4BTU	DC12V:1.86W:9BTU
Environmental
Operating Temperature	0 - 40°C	0 - 40°C
Storage Temperature	-20 - 60°C	-20 - 60°C
Humidity	20 - 90% RH, Non-Condensing	20 - 90% RH, Non-Condensing
Physical Properties
Housing	Metal	Metal
Weight	0.12 kg ( 0.28 lb )	0.12 kg ( 0.28 lb )
Dimensions (L x W x H) with bracket	7.95 x 6.80 x 1.65 cm (3.13 x 2.68 x 0.65 in.)	7.95 x 6.80 x 1.65 cm (3.13 x 2.68 x 0.65 in.)
Dimensions (L x W x H) without bracket	5.75 x 6.80 x 1.65 cm (2.26 x 2.68 x 0.65 in.)	5.75 x 6.80 x 1.65 cm (2.26 x 2.68 x 0.65 in.)

Content of delivery:

• 1x VE1821T 4K HDMI Cat 6 Extender (Transmitter)
• 1x VE1821R 4K HDMI Cat 6 Extender (Receiver)
• 1x IR emitter cable
• 1x IR receiver cable
• 1x power adapter and 4 power plugs
• 1x user instructions

The VB800 is a true 4K HDMI booster providing a solution for long distance transmission. The HDMI booster reliably extends true 4K signals and can be cascaded up to 10 levels, guaranteeing ultimate color and image quality. The VB800 is HDMI 2.0 compliant and supports all HDMI enabled devices. The booster can be rack mounted, offering excellent flexibility for managing both work and home settings.

• Superior video quality- True 4k resolutions of 4k x 2k @ 60 Hz (4:4:4) video and standard 1080p (1920 x 1080 @ 60 Hz)
• HDMI (3D, Deep Color, 4K)
• Max. Data Rate 18 Gpbs (6 Gbps Per Lane)
• HDMI and HDCP 2.2 compatible
• 4K resolution when cascaded up to 10 levels
• Input/output max distance for single unit: True 4k resolution up to a distance of 10 meters; 1080p resolution up to a distance of 20 meters (Longer distances are possible with lower data rates and/or higher quality cable.)
• A single unit can be powered from the source device
• Supports HDR
• Plug-and-play — No software installation required
• Rack mountable
• Package Contents: 1x VB800 True 4k HDMI Booster, 1x Power Adapter, 1x Rack Mount Kit, 1x User Instructions

Video Input
Interfaces	1 x HDMI Type A Female (Black)
Video Output
Interfaces	1 x HDMI Type A Female (Black)
Video
Max. Bandwidth	600 MHz
Max. Resolutions / Distance	Up to 4Kx2K@60 Hz (4:4:4)/10m; 1080p@60Hz/20m
Max. Data Rate	18Gpbs(6 Gbps Per Lane)
Compliance	HDMI, HDCP 2.2 Compatible
Power
Connectors	1 x DC Jack
Consumption	5VDC , [4K2K 60Hz] Power Consumption: 0.99W [1080p 60Hz] Power Consumption: 0.66W
Environmental
Operating Temperature	0 - 40°C
Storage Temperature	-20 - 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Metal
Weight	0.09 kg ( 0.21 lb )
Dimensions (L x W x H)	4.90 x 5.60 x 1.70 cm (1.93 x 2.2 x 0.67 in.)
Carton Lot	10 pcs
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

The VB100 VGA Booster amplifies the VGA signal from a source device and transmits it to a display up to 70 meters away. The VGA booster extends the display distance without any signal loss; to bring you a crystal clear video display at a longer distance. The VB100 is built with a compact housing design for easy installation and manual gain control to improve image quality at different distances. The VB100 can be powered from the VGA source and has a built-in LED indicator for power. The VB100 supports hotplugging and requires no software forinstallation, making it an easy, compact, and affordable solution to extend your VGA display.

• adjustable video compensation: manually adjust signal strength to compensate for distance
• superior video quality – up to 1920 x 1200 (30 m); 1280 x 1024 (70 m)
• supports VGA, XGA, SVGA, UXGA, WUXGA, and multisync monitors
• supports wide screen formats
• supports hot-plugging
• compact housing
• LED indication of power status and source device
• "Plug and Play": no software installation required

The VE812T HDMI Over Single Cat 5 Transmitter supports HDBaseT technology that uses a single Cat 5e cable to extend signals up to 100 m.The VE812T not only supports HDMI (3D, Deep Color ) but also Ultra HD (4k) and is HDCP compatible. Furthermore remote EDID pass-through ensures optimum video quality for your HDMI display. The VE812T is perfect for the meeting room, home theater or any installation that needs long distance transmission and superior video quality.

• Extends the distance between HDMI source and HDMI display
• Implements HDBaseT extension technology using only one Cat 5 cable to connect the transmitter and receiver
• HDMI (3D, Deep Color, 4kx2k); HDCP Compatible
• Anti-jamming – resists signal interference during high-quality video transmission using HDBaseT technology
• Long distance transmission - up to 100m
• Supports resolutions of up to Ultra HD 4kx2k and 1080p Full HD
• EDID Expert – selects the optimum EDID settings for smooth power-up and highest quality display
• Supports up to 340MHz bandwidth for high performance video
• Supports Dolby True HD and DTS HD Master Audio
• Built-in 8KV / 15KV ESD protection (Contact voltage 8KV; Air voltage 15 KV)

The ATEN VE1801AEUT HDMI HDBaseT-Lite transmitter delivers 4K signals up to 40 m over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable, ensuring users to stabilize HDMI signal transmission with support of 3D, Deep color and embedded HD lossless audio formats. During high-quality video transmission, the transmitter can resist signal interference with the equipped HDBaseT Anti-jamming technology and offer a reliable signal extension.

The VE1801AEUT can be easily mounted in a 1-gang junction box with EU wall plate, concealing bulky cable setups and presenting needed information in sight. In addition, with built-in PoH (Power over HDBaseT) function, the VE1801AEUT receives power supply from a connected PoH PSE supported receiver and streamlines complex power line deployment.

Expanding on previous models by the share function, the VE1801AEUT can remotely switch source when connecting to a compatible receiver, e.g., VP1421, bringing users for more convenient AV extension. This compact transmitter provides a neat and simple installation on walls or tables, enabling users to elegantly immerse their AV applications into any environment. Therefore, the VE1801AEUT is ideal for use in meeting rooms, digital educational environments or any application requiring stable high-quality transmission and effortless installation.

• Extends HDMI signals with superior video quality over a single Cat 5e/6/6a cable or ATEN 2L-2910 Cat 6 cable
  • 4K up to 40 m
  • 1080p up to 70 m
• Built-in PoH (Power over HDBaseT) function – the VE1801AEUT receives power supply from the HDBaseT output port
• HDMI (3D, Deep color, 4K); HDCP 2.2 compliant
• Designed to mount in a 1-gang junction box with EU wall plate
• Supports RS-232 channel transmission
• Consumer Electronics Control (CEC) allows interconnected HDMI devices to communicate and respond to a single remote control
• HDBaseT Anti-jamming – resists signal interference during high-quality video transmission using HDBaseT technology
• Share function – the VE1801AEUT can remotely switch source when connecting to a compatible receiver, e.g., VP1421
• LED indication of device status
• Supports wide screen format
• Built-in 8KV / 15KV ESD protection
• Plug-and-play

Package Contents

• 1x VE1801AEUT HDMI HDBaseT-Lite Transmitter with EU Wall Plate / PoH
• 1x 5-pin terminal block
• 1x rubber pad set (4 pcs)
• 1x faceplate
• 2x pan head screws
• 4x PF screws
• 1x power adapter
• 1x user instructions

Video Input
Interfaces	1 x HDMI Type A Female (Black)
Impedance	100O
Max. Distance	3 m
Video
Max. Data Rate	10.2Gbps (3.4Gbps per lane)
Max. Pixel Clock	340 MHz
Compliance	HDMI (3D, Deep Color, 4K) HDCP2.2 Compatible Consumer Electronics Control (CEC)
Max. Resolutions / Distance	Up to 4K@35m (Cat 5e/6) / 40m (Cat 6a/ATEN 2L-2910 Cat6); 1080p@60m (Cat 5e/6) / 70m (Cat 6a/ATEN 2L-2910 Cat6) *4K supported: 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0); 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)
Audio
Input	1 x HDMI Type A Female (Black)
Control
RS-232 Channel	1 x Terminal Block (3 pole, TX/RX/GND, Green)
Contact Out	1 x Terminal Block (2 pole, DO/GND, Green)
Connectors
Unit To Unit	1 x RJ-45 Female
Power	1 x Terminal Block (2 pole, +5V/GND, Green) or 1 x RJ-45 Female (POH)
Power Consumption	DC5V:3.26W:15BTU/h POH:4W:19BTU/h Note: ? The measurement in Watts indicates the typical power consumption of the device with no external loading. ? The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Environmental
Operating Temperature	0 - 40°C
Storage Temperature	-20 - 60°C
Humidity	0% - 80% RH, Non-condensing
Physical Properties
Housing	Metal
Weight	0.20 kg ( 0.44 lb )
Dimensions (L x W x H)	6.86 x 4.44 x 5.00 cm (2.7 x 1.75 x 1.97 in.)
Faceplate Dimensions (L x W x H)	8.60 x 8.60 x 1.60 cm (3.39 x 3.39 x 0.63 in.)

The VE066 Mini Cat 5 DVI Extender allows you to increase the distance between your DVI display and DVI source by up to 20 m using only one Cat 5e or Cat 6 cable, providing a convenient way to replace heavy and expensive DVI cables. With hot-plugging support, easily add or remove the VE066 Transmitter connected to the source or the VE066 Receiver connected to the display without having to power down the devices. Compatible with all ATEN DVI switches and DVI splitters, the VE066 Mini Cat 5 DVI Extender is a compact, convenient and economical way to extend your DVI display.

• Extends the distance between DVI source and DVI display
• Uses Cat 5e cable to connect the Transmitter and Receiver units
• Long distance transmission - up to 15 m for 1080p, up to 15 m for 1600 x 1200, up to 20 m for 1080i (HDTV)
• HDCP 1.1 Compliant
• Supports hot-plugging
• Superior video quality - HDTV resolutions of 720p, 1080i and 1080p (1600 x 1200), SVGA, SXGA, UXGA and WUXGA (1920x1200)
• Compact housing
• Compatible with all ATEN DVI switches and DVI splitters
• Supports LCD Screen, Plasma TV, and projectors
• Perfect for Home entertainment system, Bank, Surveillance system, Outdoors multimedia display, Airport, Finance institution
• Smart Video Display - Image quality is optimized based on the available resolution of the output device

Function	VE066R	VE066T
Physical Properties
Weight	0.05 kg ( 0.11 lb )	0.05 kg ( 0.11 lb )
Dimensions (L x W x H)	5.66 x 4.07 x 2.15 cm (2.23 x 1.6 x 0.85 in.)	5.66 x 4.07 x 2.15 cm (2.23 x 1.6 x 0.85 in.)
Housing	Plastic	Plastic
Carton Lot	20 pcs	20 pcs
Video Input
Interfaces	N/A	1 x DVI-D Male (Gold)
Impedance	N/A	100 O
Video Output
Interfaces	1 x DVI-D Male (Gold)	N/A
Impedance	100 O	N/A
Video
Max. Data Rate	4.95 Gbps (1.65 Gbps Per Lane)	4.95 Gbps (1.65 Gbps Per Lane)
Max. Pixel Clock	165 MHz	165 MHz
Compliance	HDCP Compatible	HDCP Compatible
Max. Resolutions / Distance	Up to 1080P@15m; 1080i@20m	Up to 1080P@15m; 1080i@20m
Environmental
Operating Temperature	0 - 50°C	0 - 50°C
Storage Temperature	-20 - 60°C	-20 - 60°C
Humidity	0 - 80% RH, Non-Condensing	0 - 80% RH, Non-Condensing

This USB 1.1 converter can be used to increase the distance between PC and USB device to max. 60 meters. To connect the two USB boxes, a Cat. 5 / 5e / 6 cable is required. Optimal connection between PC and USB Converter via active USB hub so that the USB port of the PC is not so heavily loaded.

• USB 1.1 compatible
• Supports all common USB devices such as scanners, printers, digital cameras, etc.
• Maximum cable length between transmitter and receiver unit: 60m
• Connection with standard UTP / FTP / S-FTP patch cable
• Optional power supply with 5V / 2A DC

The VE883AT is a True 4K HDMI Optical transmitter that extends up to 4096 x 2160 / 3840 x 2160 @ 60 Hz (4:4:4) HDMI, audio, USB 2.0, IR, RS-232, and Gigabit Ethernet signals across 300 m (VE883ATK1) or 10 km (VE883ATK2) over a single duplex fiber optic cable losslessly. While helping avoid bulky cable setup, fiber optic cables are electrically isolated, thus they are immune to RFI and EMI. With ATEN’s exclusive FarSmooth technology, the VE883AT prevents lagging and freezing by matching the output rates to the input rates and ensures that the video display is stable, smooth and identical to the source, particularly in long-distance extension applications where uninterrupted video streams are required.

The VE883AT comes with interfaces of HDMI output, analog audio output, USB 2.0, IR, RS-232, and Gigabit Ethernet. For point-to-point extension, pluggable SFP+ modules are included to serve the purpose of optical connection. Plus, the VE883AT is compatible with ATEN’s VM7584 Optical Input Board installed in ATEN’s modular matrix switches to broaden applications. It is suitable for installations where True 4K video transmission across a long distance and electrical isolation are essential, such as control rooms, factories, and hospitals.

• Extends HDMI video, audio, IR, RS-232 control, and Ethernet signals over a duplex fiber optic cable across up to 10 km*
• Lossless transmission of up to 4096 x 2160 / 3840 x 2160 @ 60 Hz (4:4:4) signals
• HDMI (3D, Deep Color, True 4K); HDCP 2.2 compliant
• ATEN’s exclusive FarSmooth technology – prevents lagging and freezing by matching the output rates to the input rates and ensures the 4K@60Hz video display to be stable, smooth and identical to the source through 10 Gbps bandwidth
• Supports transparent USB 2.0 signals for expanded connectivity with USB peripherals at a maximum transfer rate of 25MB/s
• Bi-directional IR signal transmission – IR transmission is processed one direction at a time, ranged from 30 kHz to 56 kHz
• Features RS-232 serial port for connecting peripherals such as touch screens, and barcode scanners
• Supports batch upgrades using Firmware Upgrade Utility
• Built-in 8 kV / 15 kV ESD protection
• Plug-and-play
• Hot-pluggable
• Rack-mountable

Note:

• The maximum transmission distance may vary depending on the fiber type, bandwidth, connector splicing, losses, model, chromatic dispersion, environmental factor, and kinks.
• For long distance transmissions, ATEN recommends using SFP+ modules to allow compatibility with single or multi mode fibers. Depending on the chosen package (VE883AK1 or VE883AK2), different SFP+ modules are supplied:
  • VE883AK1: 10 Gbps/300m SFP+ Duplex Multi Mode Transceiver
  • VE883AK2: 10 Gbps/10 km SFP+ Duplex Single Mode Transceiver
• ATEN recommends using Single Mode fibers that conform to IEC 11801 (OS1, OS1a, OS2), and Multi Mode fibers that conform to IEC 11801 (OM3, OM4) specifications.
• The Device is class 1 laser product. It meets the safety regulations of IEC/EN 60825-1, 21 CFR 1040.10, and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

Package Contents
1x VE883AT True 4K HDMI Optical Transmitter
1x power adapter and power cord
1x 3-pole terminal block
1x 5-pole terminal block
1x IR receiver
1x IR emitter
1x USB Type-B to USB Type-A cable
1x HDMI LockPro
1x SFP module
1x user instructions

Video Input
Interfaces	1 x HDMI Type A Female (Black)
Impedance	100 O
Max. Distance	Up to 5 m
Video
Max. Data Rate	10.2 Gbps (3.4 Gbps Per Lane)
Max. Pixel Clock	594 MHz
Compliance	HDMI (3D, Deep Color, 4K) HDCP 2.2/2.3 Compatible
Max. Resolution	4096x2160@60Hz (4:4:4) / 3840x2160@60Hz (4:4:4)
Max. Distance	1 x SFP Module (*Note) VE883AK1: 4Kx2K/60Hz 4:4:4 up to 300m (MM, OM3, Black) VE883AK2: 4Kx2K/60Hz 4:4:4 up to 10km (SM, Blue)
Audio
Input	1 x Terminal Block, 5 pole (Green)
Output	N/A
Connectors
Unit To Unit	1 x bi-directional SFP (LC)
Firmware Upgrade	1 x Micro USB (Type B) Female (Black)
Power	1 x DC Jack with locking
Fiber Optics
Data Rate	10.3 Gbps
Wavelength	VE883AK1: 850 nm VE883AK2: 1310 nm
Fiber Type	VE883AK1: Multimode(MM), OM3, LC Duplex Type VE883AK2: Singlemode(SM), LC Duplex Type
Control
USB Channel	1 x USB Type B Female (White)
RS-232 Channel	1 x Terminal Block, 3 pole (Green)
IR Channel	1 x Mini Stereo Jack Female (Black); 30K~56 KHz full range transmission
Ethernet Channel	1 x GbE (RJ-45 Female)
LEDs
Power	1 (Green)
Link	1 (Orange)
Video Output	N/A
Power Consumption	DC12V:7.01W:54BTU
Environmental
Operating Temperature	0-40°C
Storage Temperature	-20 - 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Metal
Weight	0.67 kg ( 1.48 lb )
Dimensions (L x W x H) with bracket	16.94 x 14.69 x 3.00 cm (6.67 x 5.78 x 1.18 in.)
Dimensions (L x W x H) without bracket	16.60 x 12.49 x 2.90 cm (6.54 x 4.92 x 1.14 in.)
Note	1. Operating distance is approximate. A typical maximum distance may vary depending on factors such as fiber type, bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. 2. It is recommended that you use Single Mode fibers that conforms to IEC 60793- 2-50 B1.1 or ITU-T G.652.B specifications; Use Multi Mode fibers that conform to IEC 11801 (OM3) specifications. 3. The Device is class 1 laser product. It meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.

ATEN AP212 is a dual-channel DSP-equipped amplifier that delivers 120 W per channel in a compact enclosure. The support for balanced / unbalanced line level inputs and the capability of driving 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems have made AP212 suit a wide range of public address applications. Configurable through an intuitive WebGUI, the built-in DSP allows Speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and extensive audio system protection purposes. Ground lift is deployed to eliminate unwanted hum noises from power circuit. Immersive sound experience is delivered with no compromise on power efficiency thanks to the amplifier’s Class-D design and ENERGY STAR qualification, conserving energy while lowering operational costs. Customizable Auto Standby mode enables the AP212 to automatically switch to “sleep” when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes.

Speaking of the system protection circuit, the AP212, along with the speakers connected to it, are prevented from damages led by shorted outputs, over / under-voltage, high frequency overload, and overtemperature. Plus, the amplifier will be muted when the heat sink temperature exceeds the limit. The fanless design avoids fan noise and prevents dust from building up inside the chassis.

Engineered to deliver the ultimate flexibility, the AP212 features an expansion slot for plugging in AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals. The amplifier can also be integrated with VK Control System via RS-232 and Ethernet connection for comprehensive control even from a distance. Mounting hardware is available for rack or surface-mounting depending on the installation needs. With a rich set of features, the AP212 assures reliable amplification with professional audio quality and high power efficiency for any enterprise-grade applications that require high quality sound reinforcement and distribution.

• A dual-channel DSP-equipped amplifier that delivers 120W per channel in a compact enclosure
• Supports balanced / unbalanced line level inputs and drives 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems
• Built-in WebGUI-configurable DSP allows speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and system protection
• Ground lift deployed to eliminate unwanted noises from power circuit.
• Class-D design with ENERGY STAR qualification for high power efficiency
• Customizable Auto Standby mode – Amplifier automatically switches to “sleep” when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes
• Integrated protection circuit – Protects the system from damages caused by Amp shortcut, Amp output over/under voltage, high frequency overload, and overtemperature
• Amplifier will be muted when the heat sink temperature exceeds the limit
• Fanless design – Avoids fan noise and prevents dust from building up
• Expansion slot for add-on expansion card – Install AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals
• Supports VK Control System via RS-232 and Ethernet connection
• Supports rack or surface-mounting
• Firmware upgradable

Package Contents
1x AP212 Power Amplifier with DSP
1x rack mount / surface mount kit
1x foot pad set (4 pcs)
2x 3-pin Euroblock connectors with strain relief (3.5mm)
1x 5-pin Euroblock connector with strain relief (3.5mm)
1x 4-pin Euroblock connector with screw lock (5.08mm)
1x 3-pin Euroblock connector (3.5mm)
1x power cord
1x user instructions

System Specification
Rated Power	120Wrms / 240Wpeak per Channel @4O 240Wrms / 480Wpeak @70/100V Under Bridge Mode
Distortion	THD+N: <0.1%, 1kHz, 3dB before clipping
Frequency Response	50~20kHz, +/-3dB @4O, 1W
Sensitivity	Balanced: +4dBu Unbalanced: -10dBV (0dBu=0.775Vrms, 0dBV=1Vrms)
Amplifier Type	Class D
Audio Inputs
Interfaces	2 x 3-pin 3.5mm Euroblock (Bal/Unbal Line In)
Impedance	Balanced: 20kO / Unbalanced: 10kO
Detect Threshold	-50dBu
Audio Outputs
Interfaces	Line Output: 1 x 5-pin 3.5mm Euroblock Speaker Output: 1 x 4-pin 5.08mm Euroblock
Impedance	Lo-Z: 4O / Hi-Z: 70V (20O), 100V (40O) Line Output: 600O
Audio Effects	Built-In DSP
Protection	Output Shortcut AMP Output over/under voltage High Frequency Overload Thermal Protect
Communication
RS-232	Connector: 3-pin, 3.5mm, Terminal Block Baud rate and protocol: Baud Rate: 19200, Data Bits: 8, Stop Bits:1, Parity: No, Flow Control: No
Compliance
Certification	FCC, CE, UKCA
Power
Maximum Input Power Rating	100-240V~, 50/60Hz, 4A with PFC
Power Consumption	AC110V:41.9W:196BTU AC220V:39.6W:186BTU
Environmental
Operating Temperature	0~50?
Humidity	0-80% RH, Non-Condensing
Storage Temperature	-20~60?
Physical Properties
Weight	2.15 kg ( 4.74 lb )
Housing	Metal
Dimensions (L x W x H)	20.00 x 32.30 x 4.40 cm (7.87 x 12.72 x 1.73 in.)