The VK112EU is a fully-customizable 12-button keypad designed for use with the ATEN Control System. The keypad provides an interface to control devices in a room from a standard wall mounted faceplate. Created with flexibility in mind, the 2-gang keypad can be laid out in 125 different combinations of 6 to 12 buttons that snap together as easy as Lego’s. By connecting to the VK2100/VK1100 Control Box over a LAN, users will find it’s effortless using VK6000 software to configure the desired control of any connected device from the keypad. With the buttons ready to go, you have instant and smart control of the facilities from a keypad or keypads that can manage any device in the room. The VK112EU is an affordable solution, perfect to serve as the primary interface in meeting rooms, or as secondary device control in classrooms and conference centers.

• Key pad - provides physical connection to the ATEN Control System
• Fully customizable with 125 layout combinations of 6 to 12 buttons
• System LED indicators for quick connection status check
• Dual-color button LEDs for clear indication and visibility in dark environments
• Easy ID paring with Control Box for Ethernet communication
• Up to 8 keypads connect to a single Control Box for future scalability
• Versatile modes support flexible behavior settings for each button
• Intuitive web GUI for easy keypad configuration
• Redundant power supplies with Power over Ethernet (PoE) and DC power
• Customized button engraving service

Package Contents:

• 1x VK112EU Keypad
• 18x Buttons
• 1x Terminal Block
• 1x Faceplate
• 1x User Instructions

Interfaces
Ethernet	• 1 x RJ-45 Female, 10/100Base-T • Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS • DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:   IP: 192.168.0.60   Subnet Mask: 255.255.255.0
Keypad Layout	6~12 buttons customizable in 125 keypad layouts
Switches
Controller ID	1 x 16-segment Switch
Keypad ID	1 x 8-segment Switch
Reset Button	1 x Semi-recessed Pushbutton
Power Consumption	DC5V:1.25W:6BTU
Environmental
Operating Temperature	0 – 50°C
Storage Temperature	–20 – 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Plastic
Weight	0.14 kg ( 0.31 lb )
Dimensions (L x W x H)	8.32 x 14.76 x 3.87 cm (3.28 x 5.81 x 1.52 in.)
Faceplate Dimension (L x W x H)	8.62 x 15.12 x 0.92 cm (3.39 x 5.95 x 0.36 in.)
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

The ATEN VK330 is a 10.1" touch panel with a capacitive multi-touch TFT-LCD screen. The touch panel is installed natively with the ATEN control system app and is compatible with the ATEN control box and the control panel.

The VK330 supports Power-over-Ethernet (PoE), which allows power and data to be transmitted to the touch panel via a single Ethernet cable, making it perfect for supporting the special environments in which these applications require a solid and wired connection for stability and high security requirements

It is an ideal solution for high security areas such as the military, hospitals, government offices and corporate boardrooms. An additional wall mounting kit (ATEN VK302) is available for flexible installation ; the touch panel can also be mounted on the desk with the table mounting kit (ATEN VK304) or any standard VESA 75 x 75 mm bracket.
The ATEN control system is an Ethernet-based standard management system, which consists of controllers, expansion boxes, configurator and control interfaces and connects all hardware devices to enable centralized control of the devices directly and easily from any mobile device or any interface of the ATEN control system enable. With the inclusion of the VK330 touch panel in the ATEN control system family, we complete our control solutions that meet the high requirements of the target applications.

• 10.1 ”touch panel
• Natively installed ATEN control system app. Developed for integrated use with the ATEN control system
• Supports Power over Ethernet (PoE), whereby power and communication can be received via a single Ethernet cable
• Capacitive multi-touch screen li >
• Flexible installation and available for the additional wall mounting kit (ATEN VK302) and table mounting kit (ATEN VK304), as well as compatible with all standard VESA 75 x 75 mm brackets

Scope of delivery: < ul> 1x VK330 10.1 ”touch panel 1x operating instructions

Panel specifications
Type of display	TFT-LCD
size	10.1 "
touchscreen td>	Capacitive
Resolution	1280 x 800
Aspect ratio	16: 9 td>
color depth	8 bits
Contrast ratio	800: 1
Backlight	LED
Viewing angle	± 85 ° (H), ± 85 ° (V)
Interfaces
Ethernet	1 x RJ-45 socket, 10/100/1000 BaseT
USB	1 x USB -Type-A
Network input
PoE < / td>	802.3 af PoE / 802.3 at PoE +
Power consumption	DC48V: 20WBTU
Environment
Operating temperature td>	0 - 40 ° C
Storage temperature	- 10 & nbsp; - & nbsp; 55 ° C
Humidity	10 - 80% relative humidity, non-condensing
Physical properties
Housing	Plastic
Weight	0.62 kg (1.37 lb)
Dimensions (L x W x H)	25.20 x 17.78 x 2.45 cm (9.92 x 7 x 0.96 in.)
Note	With some rack Mount products, it should be noted that the usual dimensions of WxDxH are given in an LxWxH format.

The VK258 8-Channel Digital I/O Expansion Box provides an additional eight channels of digital input/output for a flexible expansion of the ATEN Control System. This allows users to control more digital I/O devices, such as various sensors, dry contact devices, PCs, and motor-driven devices in environments where more devices need to be centrally controlled. With the advantage of the Ethernet-based connection, the expansion box easily connects to the ATEN Controller via a LAN connection from different locations across a network.

• Provides 8 Digital I/O channels to expand the ATEN Control System
• Up to eight VK258 expansion boxes can be added to a single ATEN Controller
• Flexible Deployment – connects to an ATEN Controller via an Ethernet connection
• ID Switch pairs the VK258 with a controller to instantly configure the network settings
• One DC output allows you to power I/O or other low-voltage devices that require an extra power supply
• Supports Power over Ethernet (PoE) or DC power supply
• Firmware upgradable through USB, firmware upgrade tool, or web interface

Package Contents:

• 1x VK258 8-Channel Digital I/O Expansion Box
• 1x Rack Mount Kit
• 9xTerminal Blocks
• 1x User Instructions

Interfaces
I/O	• 8 x Programmable Digital Input / Output Channel (8 x 2-Pole Terminal Block Connector) Digital Input: – VDC Mode Input Voltage Range: 0 to 24 VDC Programmable Range: 1 to 24 VDC – Dry Contact Mode Pull-up 2k ohms to +12 VDC Digital Output: 300 mA sink from 24 VDC
Ethernet	• 1 x RJ-45 Female, 10/100Base-T • Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH • DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0
Switches
Controller ID	1 x 16-segment Switch
Expander ID	1 x 8-segment Switch
Reset Button	1 x Semi-recessed Pushbutton
USB	1 x USB Type A (Firmware upgrade only)
Power Consumption	DC5V:2.2W:36BTU DC48V:2.75W:39BTU
Power
Output	12 VDC, 300 mA
Environmental
Operating Temperature	0 – 50°C
Storage Temperature	–20 – 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Metal
Weight	0.46 kg ( 1.01 lb )
Dimensions (L x W x H)	13.00 x 7.58 x 4.20 cm (5.12 x 2.98 x 1.65 in.)
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

The VK112EUTTK is a fully-customizable 12-button keypad designed for use with the ATEN Control System. The keypad provides an interface to control devices in a room from a standard wall mounted faceplate. Created with flexibility in mind, the 2-gang keypad can be laid out in 125 different combinations of 6 to 12 buttons that snap together as easy as Lego’s. By connecting to the VK2100/VK1100 Control Box over a LAN, users will find it’s effortless using VK6000 software to configure the desired control of any connected device from the keypad. With the buttons ready to go, you have instant and smart control of the facilities from a keypad or keypads that can manage any device in the room. The VK112EU is an affordable solution, perfect to serve as the primary interface in meeting rooms, or as secondary device control in classrooms and conference centers.

• Key pad - provides physical connection to the ATEN Control System
• Fully customizable with 125 layout combinations of 6 to 12 buttons
• System LED indicators for quick connection status check
• Dual-color button LEDs for clear indication and visibility in dark environments
• Easy ID paring with Control Box for Ethernet communication
• Up to 8 keypads connect to a single Control Box for future scalability
• Versatile modes support flexible behavior settings for each button
• Intuitive web GUI for easy keypad configuration
• Redundant power supplies with Power over Ethernet (PoE) and DC power
• Customized button engraving service

Package Contents:

• 1x VK112EU Keypad
• 18x Buttons
• 1x Terminal Block
• 1x Faceplate
• 1x User Instructions

Interfaces
Ethernet	• 1 x RJ-45 Female, 10/100Base-T • Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS • DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:   IP: 192.168.0.60   Subnet Mask: 255.255.255.0
Keypad Layout	6~12 buttons customizable in 125 keypad layouts
Switches
Controller ID	1 x 16-segment Switch
Keypad ID	1 x 8-segment Switch
Reset Button	1 x Semi-recessed Pushbutton
Power Consumption	DC5V:1.25W:6BTU
Environmental
Operating Temperature	0 – 50°C
Storage Temperature	–20 – 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Plastic
Weight	0.14 kg ( 0.31 lb )
Dimensions (L x W x H)	8.32 x 14.76 x 3.87 cm (3.28 x 5.81 x 1.52 in.)
Faceplate Dimension (L x W x H)	8.62 x 15.12 x 0.92 cm (3.39 x 5.95 x 0.36 in.)
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

The VK0200 is a fully-customizable 12-button Control Pad that integrates a controller with a keypad as an all-in-one solution. Aimed for small/medium meeting room or classroom control, the VK0200 offers a ready-to-use solution that easily connects the devices, configures via the intuitive VK6000 Configurator Software, and flexibly customizes keypad button functions and layout to fulfill most applications.

The ATEN Control System is an Ethernet-based management system that connects all the hardware devices found in a room for centralized control effortlessly. The VK0200 Control Pad not only plays the role as the main controller that connects the hardware devices, but also acts as a control interface with customizable buttons and layout. Created with flexibility in mind, the two-gang Control Pad can be laid out in 125 different combinations of 6 to 12 buttons that snap together as easy as Lego’s. By connecting to the local network, users will find it’s effortless using VK6000 software to configure the desired control of any connected device from the Control Pad. With the ready-to-go combo Control Pad, you have instant and smart control of the facilities from a Control Pad that can manage any device in the room.

VK0200 Control Pad

• Supports various interface connections:
  • 2 x RS-232 ports
  • 2 x Relay channels
  • 1 x Dgital input channel
  • 1 x Ethernet port
• Designed to mount in 2-gang EU-type and MK-type junction boxes
• Fully customizable with 125 layout combinations of 6 to 12 buttons
• Supports native KNX IP for building management systems
• Telnet, TCP, UDP, HTTP, HTTPS, ONVIF, and PJLink compliant
• Supports project file backup1
• Web GUI for easy system configuration
• Supports SSH communication for data monitoring2
• LED indication of connection and hardware status
• Dual-color LEDs for clear indication in dark environments
• Redundant power supplies – Power over Ethernet and DC 5V (optional)
• Customized button engraving service

VK6000 Configurator Software

• Simple profile setup with easy configuration steps via intuitive GUI
• Customizable GUI to be used on mobile devices and PC3
• Supports ControlAssist that allows PC control4
• Built-in Database Generator for device driver setup and overall device management
• Built-in ATEN Library comprising 10,000+ device drivers and complete ATEN VanCryst product drivers
• Two-way communication enables user-defined event monitoring to automatically trigger the next actions
• Test tool to verify commands in action before uploading the profile to the VK0200 Control Pad

Note:

1. Each ATEN Control Box is capable of backing up one project file.
2. The SSH protocol can be used for monitoring the receiving/transmission data of the Control Pad.
3. Additional license is required for mobile control.
4. For details on the supported PC control actions, refer to the ATEN Control System User Manual.

Package Contents:

• 1x VK0200 12-button Control Pad
• 1x Button Pack
• 6x Terminal Blocks
• 1x Faceplate
• 1x User Instructions

Interfaces
Keypad Layout	6~12 buttons customizable in 125 keypad layouts
Serial	• 2 x Bi-directional RS-232 Port (2 x 3-Pole Terminal Block Connector);  – Baud Rate: 300 to 115200 (default: 9600);  – Data Bit: 8 (default) or 7;  – Stop Bit: 1 (default) or 2;  – Parity: None (default), even or odd
Relay	• 2 x Relay Channel (2 x 2-Pole Terminal Block Connector); • Normally open, isolated Relays; • Contact Rating: Max 24 VDC, 1A
I/O	• 1 x Digital Input Channel (1 x 2-Pole Terminal Block Connector);  – VDC Mode Input Voltage Range: 0 to 5 VDC; Programmable Range: 1 to 5 VDC;  – Dry Contact Mode Pull-up 2k ohms to + 5 VDC
Ethernet	• 1 x RJ-45 Female, 10/100Base-T • Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH • DHCP-enabled.
Switches
Controller ID	1 x 16-segment Switch
Reset Button	1 x Semi-recessed Pushbutton
Power Consumption	DC5V:1.15W:5BTU DC48V:1.44W:7BTU
Environmental
Operating Temperature	0 – 50°C
Storage Temperature	–20 – 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Plastic
Weight	0.38 kg ( 0.84 lb )
Dimensions (L x W x H)	8.32 x 14.76 x 4.84 cm (3.28 x 5.81 x 1.91 in.)
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

The VPK104 is a 4-button contact closure remote pad designed for use with VP1420/VP1421 Presentation Matrix Switch. By connecting the contact closure ports between the remote pad and a presentation switch, the VPK104 provides a convenient interface to switch the input sources for a video presentation switch from a wall-mounted faceplate. The VPK104 is an easy and affordable solution, perfect to serve as the control interface in a meeting room, class room, or lecture room.

• 4-button contact closure remote control pad for ATEN VP1420/VP1421 Presentation Matrix Switches
• Easy connection via contact closure; no extra power source required
• 4-pole captive screw connectors for ease of installation
• LED lights for port selection status indication
• Engraved buttons for intuitive port indication and operation

Package Contents

• 1x VPK104 4-Key Contact Closure Remote Pad
• 4x 4-pole Terminal Blocks
• 1x User Instructions

Interfaces
Keypad Layout	4 buttons
Control
Contact Out	4 xCaptive Screw Connector, 2 pole
LED In	4 xCaptive Screw Connector, 2 pole
Environmental
Operating Temperature	0 – 50°C
Storage Temperature	–20 – 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Plastic
Weight	0.12 kg ( 0.26 lb )
Dimensions (L x W x H)	11.63 x 7.06 x 4.78 cm (4.58 x 2.78 x 1.88 in.)
Faceplate Dimension (L x W x H)	11.92 x 7.42 x 0.92 cm (4.69 x 2.92 x 0.36 in.)
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

The VK224 provides Ethernet-to-serial connectivity with 4 bi-directional RS-232 / 422 / 485 serial ports. It allows users to remotely access serial devices from a PC or any system located anywhere. The complete Telnet CLI commands are fully integrated into users’ commercial and industrial applications.

What’s more, the VK224 serves as a flexible expansion box of the ATEN Control System, enabling users to control additional serial devices through an ATEN controller in any environments where more serial devices are required. With the advantage of Ethernet-based connection, the expansion box can be easily connected to controllers via LAN connection from a variety of locations across a network.

• An Ethernet-to-serial box ships with 4 bi-directional RS-232/422/485 serial ports
• Supports Power over Ethernet (PoE) or DC power supply
• Supports Modbus protocol - enables integration with Modbus devices, including TCP, RTU and its checksum data
• Supports Telnet CLI (command-line interface) mode for third-party system integration
• WebUI provides VK224 system information, including firmware upgrade
• An expansion solution for connecting more serial devices to ATEN Control System
• Flexible deployment via Ethernet connection
• Works with a connected ATEN controller with ID Switch through instant configuration

Package Contents

• 1x VK224 4-Port Serial Expansion Box
• 1x Mounting Kit
• 1x User Instructions

Interfaces
Serial	• 4 x Programmable Bi-directional RS-232/422/485 Port (4 x DB9 Male Connector, configurable via pin assignments);  – Baud Rate: 300 to 115200 (default: 9600);  – Data Bit: 8 (default) or 7;  – Stop Bit: 1 (default) or 2;  – Parity: None (default), Even or Odd;  – Flow Control: None (default) RTS/CTS RS-232 RS-422 RS-485 Pin2: RX Pin 1:RX- Pin3:D+ Pin3: TX Pin 2: RX+ Pin 4:D- Pin 5: GND Pin 3: TX+ Pin 5: GND* Pin 7: RTS Pin 4: TX- Note: A ground terminal connection is recommended but not required. Pin 8: CTS Pin 5: GND
Ethernet	• 1 x RJ-45 Female, 10/100Base-T • Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH • DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0
Switches
Controller ID	1 x 16-segment Switch
Expander ID	1 x 8-segment Switch
Reset Button	1 x Semi-recessed Pushbutton
USB	1 x USB Type A
Power Consumption	DC5V:3.8W:28BTU/h DC48V:4.75W:33BTU/h Note: ? The measurement in Watts indicates the typical power consumption of the device with no external loading. ? The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Environmental
Operating Temperature	0 – 50°C
Storage Temperature	–20 – 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Metal
Weight	0.45 kg ( 0.99 lb )
Dimensions (L x W x H)	13.00 x 7.58 x 4.20 cm (5.12 x 2.98 x 1.65 in.)

ATEN 2XRT-0007G IR Remote Control for Aten VS0801H

The ATEN Desktop KVM Remote Port Selector with Keypad,2XRT-0021G, is designed to enhance user experience and efficiency while operating ATEN desktop KVM Switches by providing an efficient way to switch between connected computers. Users can simply plug and play the 2XRT-0021G to the desktop KVM Switch without any additional software installation required to quickly and easily control desktop KVM Switch. Once the 2XRT-0021G is connected, simply press its pushbuttons to switch KVM focus. The status will show on both the KVM front panel LEDs and the 2XRT-0021G front panel LEDs. Thanks to its compact size, the device can be placed line-of-sight on the desktop, enabling instant switching across multiple PCs and optimizing productivity while eliminating cable clutter.

• Plug-and-Play – no additional software installation is required
• Auto Detection
• Clear LED indications reflect real-time KVM status
• Compact size with 1.8 m cable for easy deployment

Content of delivery:1x Desktop KVM Remote Port Selector with Keypad

Connectors
Link	RJ-11
LEDs
Online / Selected (KVM Port)	8 (Orange)
Cable Length	1.8 m
Maximum Input Power Rating	5V; 0.15W
Power Consumption	DC5V:0.15W:1BTU
Environmental
Operating Temperature	0-50°C
Storage Temperature	-20-60°C
Humidity	0 - 80% RH, Non-condensing
Physical Properties
Housing	Plastic
Weight	0.14 kg ( 0.31 lb )
Dimensions (L x W x H)	7.70 x 11.19 x 3.60 cm (3.03 x 4.41 x 1.42 in.)

ATEN VK430 RBS Panel is a 10.1" touch-screen panel used to manage conference rooms, and is centrally configured by ATEN RBS Configurator – centralized management software of RBS Panels while integrating with calendar servers, such as Microsoft Office 365 Calendar – to provide convenient scheduling and availability allocation for all conference rooms in the system. That is, through a few simple taps, authorized personnel can make conference room reservations, extend or release room usage, and check the booking schedules of any conference room directly on the VK430 while enjoying its user-friendly interface. In addition, through ATEN RBS Configurator, administrators can have a centralized view of the availabilities and locations of all conference rooms in real time as well as manage each VK430 connected from afar, elevating meeting room utilization efficiency.
Highlighted features of the VK430 include its Power over Ethernet (PoE) support and two illuminating LED bars. With PoE, VK430 can transmit data while receiving power over a single Ethernet cable, which effectively reduces installation costs and power consumption. The two LED light bars, one on each side, illuminates in user-defined colors to indicate the availability status of the conference room, available, reserved, or occupied, and allow users to know the room’s availability at a glance.
Without compromise on aesthetics, VK430 features a sleek and elegant housing that supports 75*75 mm VESA-compliant mounting options to suit various installation scenarios. VK430 is preinstalled with its standard wall mount kit while providing 3M VHB™ Tape for it to be easily installed onto a hard or glass wall.
The VK430, along with the ATEN RBS Configurator, delivers an enterprise-grade room management solution perfect for all business environments, making meeting room management a breeze while elevating the overall room-booking experience.

The AS104 comes in a pair of 4” coaxial 2-way ceiling loudspeakers that deliver decent sonic performance. Each speaker ships with a 4” woofer, 20 mm dome tweeter, and 30 W RMS, 60 W peak (8O) power handling capability. Excellent and consistent sound quality is ensured by taking advantages of its 100 - 20 kHz bandwidth and wide coverage, allowing less speakers used to cover the listening area to lower the cost of the system installed.

The loudspeaker contains a matching transformer, running comfortably on 70 / 100 V lines or at 8O to suit various application demands. Phase issues are minimized as a result of the adoption of the coaxial neodymium magnetic driver, making sound waves with various frequency bands easier to be added together instead of canceling each other out. Made of UL94-V0-compliant flame retardant materials, the housing, together with the Zinc-coated steel backcan, improve safety for applications where flame and fire protection is of the highest importance. When it comes to installation, each speaker features a cutout template for quick and easy post construction installation and can be secured with its dog-leg mounting system. The paintable magnetic grille assures effortless installation and cleaning while giving unobtrusive appearance in any room design.

AS104 is ideal for residence and enterprise-grade audio applications, such as auditoriums, houses of worship, sports venues, and any small or mid-sized commercial spaces that require a clear and intelligible sound solution without compromise on life safety.

• Coaxial design with premium components: 4” high output driver with rubber surround and heavy-duty voice coil, 20 mm dome tweeter
• 100 – 20 kHz bandwidth with wide coverage for consistent, full-range coverage of the space while reducing the amount of the speakers needed
• Switchable for use as either an 8 O low-impedance speaker or as part of a 70V / 100V distributed loudspeaker system
• UL94-V0 compliance for life safety applications
• Paintable magnetic grille for blending into any room decor
• Ease of installation guaranteed with the magnetic grille, dog leg mounting system and cutout template

Package Contents

• 2 x AS104 4” Coaxial Ceiling Loudspeakers
• 2 x Euroblock connectors
• 2 x ceiling reinforcement kits
• 2 x cutout templates
• 2 x speaker grilles
• 1 x user instructions

System Specification
LF Driver	4" Paper Cone with Rubber Suspension
HF Driver	20mm PEI Dome Tweeter
Frequency Response	100~20kHz (-10dB)
Distortion	<=5%
Rated Power	30Wrms/60Wpeak
Sensitivity	86dBSPL, @1m, 1W, 1kHz
Transformer Taps	70V(2.5W, 5W, 10W, 20W) 100V(*, 5W, 10W, 20W)
Connectors
Audio Inputs	5.08mm Euroblock Connector
Environmental
Operating Temperature	0 - 40°C
Humidity	0 - 80% RH, Non-Condensing
Storage Temperature	-20 - 60°C
Physical Properties
Weight	2.20 kg ( 4.85 lb )
Housing	UL94-V0 ABS Plastic Baffle Zinc-Coated Steel Backcan
Dimensions (L x W x H)	21.80 x 21.80 x 13.00 cm (8.58 x 8.58 x 5.12 in.)
Color	White Speaker Grille (Paintable) White Speaker Baffle
Cut-out Diameter	182mm
In-ceiling Clearance Height	125mm
Carton Lot	2 Pcs/Carton
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

The AP106 is a 60W power amplifier with Hi-Z outputs capable of driving 70 V / 100 V audio systems. The support for balanced / unbalanced line level inputs enables superior sound quality and installation flexibility. Apart from the overall volume adjustment function, the built-in 2-band shelf EQ provides ± 6 dB boost / suppression of treble and bass control, offering subtle tone shaping and extra control versatility. As a result of the extra headroom this amplifier delivers, accommodating transient audio peaks and preventing distortion is never a problem to the AP106.

With Class D efficiency, the amplifier comes in a smaller, lighter enclosure, yet runs cooler comparing with other classes of amplifiers with the same amount of power. The fanless design helps eliminate operation shutdown brought by fan malfunction and ensures the amplifier not to be vulnerable to outside elements. Constructed in a compact, sealed casing, the AP106 approves of hidden placement, for instance, behind the TV, or even in the dusty environments, such as above the ceiling.

Speaking of the system protection circuit, the AP106, along with the speakers connected to it, is prevented from damages led by shorted outputs, over / under-voltage, high frequency overload, and overtemperature. Built to be energy-efficient, the amplifier enters Power Saving Mode when no audio input is detectable in 30 minutes and turns back on when a source is detected. Additional features include the front panel LEDs that indicate the device status, plus the bi-directional RS-232 serial port that allows for firmware upgrade and easy integration with ATEN’s Control System, which acts as a centralized platform where hardware devices are converged to be monitored and controlled via an intuitive GUI. The AP106 is perfect for upgrading commercial or residential Pro AV systems where maintaining ultra-low distortion while exhibiting exceptional sound quality is required.

• A high-output power amp that delivers 60 W of power to 70 V or 100 V distributed audio systems
• Built-in 2-band shelf EQ provides ± 6 dB boost / suppression of treble and bass control
• Delivers extra headroom to accommodate transient audio peaks and prevent distortion
• Fanless design eliminates operation shutdown caused by fan malfunction and ensures the amplifier not to be vulnerable to outside elements
• Compact, sealed casing approves of hidden placement even in the dusty environments
• Provides a wide range of professional audio equipment with easy, secure connectivity:
  • Supports balanced and unbalanced line inputs on an Euroblock connector and a TRS jack (unbalanced input only)
  • Output for high-Z via an Euroblock connector
  • AC power on IEC receptacle for overseas operation
• Power Saving Mode – the AP106 shuts down when no audio input higher than -50 dBu is detectable in 30 minutes and turns back on when a source reaches -30 dBu is detected
• Integrated protection – Amp shortcut, Amp output over/under-voltage, high frequency overload, and overtemperature protection
• Bi-directional RS-232 serial port allows for firmware upgrade and easy integration with ATEN’s Control System
• Class D high efficiency and energy saving construction
• Perfect for upgrading commercial or residential Pro AV systems where maintaining ultra-low distortion while exhibiting exceptional sound quality is required

Package Contents

• 1x AP106 60W Mono Hi-Z Power Amplifier
• 1x 5-pin Euroblock connector with strain relief (3.5 mm)
• 1x 2-pin Euroblock connector with screw lock (5.08 mm)
• 1x 3-pin Euroblock connector without strain relief (3.5 mm)
• 1x power cord
• 1x foot pad set (4 pcs)
• 1x user instructions

System Specification
Rated Power	60Wrms/ 120Wpeak
Distortion	THD+N: <0.1%, 1kHz, 3dB before clipping
Frequency Response	80~20kHz, 0/-3dB @70V, 1W
Sensitivity	Balanced: +4dBu Unbalanced: -10dBV (0dBu=0.775Vrms, 0dBV=1Vrms)
Amplifier Type	Class D
HPF	80Hz, -12dB/Oct
Audio Inputs
Interfaces	1 x 5-pin 3.5mm Euroblock (Bal/Unbal Line In) 1 x 3.5mm TRS Unbalanced Phone Jack (Priority)
Impedance	Balanced: 20kOhms Unbalanced: 10kOhms
Detect Threshold	-50dBu
Audio Outputs
Interfaces	1 x 2-pin 5.08mm Euroblock
Impedance	Minimum Load 70V: 80Ohms 100V: 160Ohms
Audio Effects	2-band Shelf EQ, +/-6dB
Protection	Output Shortcut AMP Output over/under voltage High Frequency Overload Thermal Protect
Communication
RS-232	Connector: 3-pin, 3.5mm, Terminal Block Baud rate and protocol: Baud Rate: 19200, Data Bits: 8, Stop Bits:1, Parity: No, Flow Control: No
Power
Power Consumption	100-240V~, 50/60Hz, 1A
Environmental
Operating Temperature	0~40°C
Humidity	0-80% RH, Non-Condensing
Storage Temperature	-20~60°C
Physical Properties
Weight	1.23 kg ( 2.71 lb )
Housing	Metal
Dimensions (L x W x H)	20.00 x 15.72 x 4.40 cm (7.87 x 6.19 x 1.73 in.)
Note	Rack/surface mount kits are sold separately.
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

ATEN IR Remote Control 2XRT-0106G, for Aten VM0808HB, VM0404HB, VM0808HA, VM0404HA, VM3404H, VM5808D, VM5404D, VM6404H, VM5404H, VM5808H, VM0404

The VPK312 is a 12-key, network-based remote pad designed for use with ATEN Presentation Switches. It offers an intuitive interface for function control of the connected Presentation Switch from a standard 2-gang EU wallmounted keypad. Created with flexibility in mind, the functions and layout of the keys can be easily customized via an intuitive web GUI to meet different application requirements.

Setting up the VPK312 is easy. Simply pair the VPK312 Remote Pad with a Presentation Switch over Ethernet, and the web GUI will assist you through the configuration. With up to 6 Remote Pads can be connected to one Presentation Switch, the VPK312 provides an scalable and affordable control interface to work with Presentation Switches that is perfect for any meeting room, class room, or lecture room.

• 12-key Network Remote Pad for ATEN Presentation Switches
• Easy pairing with a Presentation Switch via the host Presentation Switch's web console
• Effortless configuration via the intuitive web GUI
• Fully customizable for the functions and layout of the keys
• Dual-color button LEDs for clear indication and visibility
• Power redundancy supported when both DC power and Power over Ethernet (PoE) are supplied
• Convenient reset of system and network settings using the built-in reset button
• Firmware upgradable
• Engraved buttons for intuitive port indication and operation
• Note: VPK312K1 provides 29 engraved buttons to support multiple function control with VP2730.

Package Contents

• 1x VPK312 12-Key Network Remote Pad
• 1x Faceplate
• 1x Pack of Button Caps
• 1x Power Adapter
• 1x 2-pole Terminal Block
• 1x User Instructions

Interfaces
Keypad Layout	12 engraved buttons
Ethernet	• 1 x RJ-45 Female, 10/100Base-T • Supported Protocol: DHCP, HTTP/ HTTPS • DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0
Reset Button	1 x Semi-recessed Pushbutton
Power Consumption	DC5V:0.8W:3BTU DC48V:1W:4(POE)BTU
Connectors
Power	2-pole terminal block connector
Environmental
Operating Temperature	0 – 40°C
Storage Temperature	–20 – 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Plastic
Weight	0.20 kg ( 0.44 lb )
Dimensions (L x W x H)	8.32 x 14.76 x 4.80 cm (3.28 x 5.81 x 1.89 in.)
Faceplate Dimensions (L x W x H)	8.62 x 15.12 x 0.92 cm (3.39 x 5.95 x 0.36 in.)
Carton Lot	5 pcs
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

The AS106 comes in a pair of 6.5” coaxial 2-way ceiling loudspeakers that deliver decent sonic performance. Each speaker ships with a 6.5” woofer, 20 mm dome tweeter, and 60 W RMS, 120 W peak (8O) power handling capability. Excellent and consistent sound quality is ensured by taking advantages of its 100 - 20 kHz bandwidth and wide coverage, allowing less speakers used to cover the listening area to lower the cost of the system installed.

The loudspeaker contains a matching transformer, running comfortably on 70 / 100 V lines or at 8O to suit various application demands. Phase issues are minimized as a result of the adoption of the coaxial neodymium magnetic driver, making sound waves with various frequency bands easier to be added together instead of canceling each other out. Made of UL94-V0-compliant flame retardant materials, the housing, together with the Zinc-coated steel backcan, improve safety for applications where flame and fire protection is of the highest importance. When it comes to installation, each speaker features a cutout template for quick and easy post construction installation and can be secured with its dog-leg mounting system. The paintable magnetic grille assures effortless installation and cleaning while giving unobtrusive appearance in any room design.

AS106 is ideal for residence and enterprise-grade audio applications, such as auditoriums, houses of worship, sports venues, and any small or mid-sized commercial spaces that require a clear and intelligible sound solution without compromise on life safety.

• Coaxial design with premium components: 6.5” high output driver with rubber surround and heavy-duty voice coil, 20 mm dome tweeter
• 80 – 20 kHz bandwidth with wide coverage for consistent, full-range coverage of the space while reducing the amount of the speakers needed
• Switchable for use as either an 8 O low-impedance speaker or as part of a 70V / 100V distributed loudspeaker system
• UL94-V0 compliance for life safety applications
• Paintable magnetic grille for blending into any room decor
• Ease of installation guaranteed with the magnetic grille, dog leg mounting system and cutout template

Package Contents

• 2 x AS106 6.5” Coaxial Ceiling Loudspeakers
• 2 x Euroblock connectors
• 2 x ceiling reinforcement kits
• 2 x cutout templates
• 2 x speaker grilles
• 1 x user instructions

System Specification
LF Driver	6.5" Paper Cone with Rubber Suspension
HF Driver	20mm PEI Dome Tweeter
Frequency Response	80~20kHz (-10dB)
Distortion	<=5%
Rated Power	60Wrms/120Wpeak
Sensitivity	90dBSPL, @1m, 1W, 1kHz
Transformer Taps	70V(7.5W, 15W, 30W, 60W) 100V(*, 15W, 30W, 60W)
Connectors
Audio Inputs	5.08mm Euroblock Connector
Environmental
Operating Temperature	0 - 40°C
Humidity	0 - 80% RH, Non-Condensing
Storage Temperature	-20 - 60°C
Physical Properties
Weight	3.70 kg ( 8.15 lb )
Housing	UL94-V0 ABS Plastic Baffle Zinc-Coated Steel Backcan
Dimensions (L x W x H)	25.72 x 25.72 x 19.75 cm (10.13 x 10.13 x 7.78 in.)
Color	White Speaker Grille (Paintable) White Speaker Baffle
Cut-out Diameter	221mm
In-ceiling Clearance Height	195mm
Carton Lot	2 Pcs/Carton
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

The VK248 8-Channel Relay Expansion Box provides an additional eight channels of relay output for a flexible expansion of the ATEN Control System. This allows users to control additional devices such as screen, projector lifts and blinds in environments where more devices are required. With the advantage of an Ethernet-based connection, the expansion box easily connects to the VK2100 Control Box via a LAN connection from a variety of locations across a network.

• Provides 8 relay channels to expand the ATEN Control System
• Up to eight VK248 expansion boxes can be added to a single VK2100 Control Box
• Flexible Deployment: Connects to a VK2100 Control Box via an Ethernet connection
• ID Switch pairs the VK248 with a controller to instantly configure the network settings
• Provides DC power to power an AC relay module or other device
• Supports Power over Ethernet (PoE) or DC power supply
• Firmware upgradable through USB or Web interface

Package Contents:

• 1x VK248 8-Channel Relay Expansion Box
• 1x Mounting Kit
• 9x Terminal Blocks
• 1x User Instructions

Interfaces
Relay	• 8 normally open relays (8 x 2-pole terminal block) • Contact Rating: Max 24 VDC, 2A
Ethernet	• 1 x RJ-45 Female, 10/100Base-T • Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH • DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0
Switches
Controller ID	1 x 16-segment Switch
Expander ID	1 x 8-segment Switch
Reset Button	1 x Semi-recessed Pushbutton
USB	1 x USB Type A (Firmware upgrade only)
Power Consumption	DC5V:2.82W:24BTU
Environmental
Operating Temperature	0 – 50°C
Storage Temperature	–20 – 60°C
Humidity	0 - 80% RH, Non-Condensing
Power
Output	12 VDC, 300 mA
Physical Properties
Housing	Metal
Weight	0.65 kg ( 1.43 lb )
Dimensions (L x W x H)	20.00 x 7.58 x 4.20 cm (7.87 x 2.98 x 1.65 in.)
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

The VK102 is a 2-Gang EU-type tabletop kit that takes the flexibility of ATEN’s control system solutions (e.g. VK0200 and VK112EU), touch panel models (e.g. VK320), and Pro AV transmitter lineup (e.g. VE2812AEUT) to the next level. It is also compatible with any 3rd party EU/MK type device. By tilting the device attached to the VK102 at an ergonomic angle, the VK102 helps reduce the force needed when one presses the device’s keys or connects cables to the device’s ports. With screw holes that ensure secure attachment to the surface, the VK102 supports desk mounting and wall mounting to meet versatile installation needs. The anti-slip rubber at the bottom provides extra grip.

The VK102 comes with ample space that allows for cable routing through either the rear opening or the bottom, making cable management easier while optimizing space usage. Its sleek, elegant design adds aesthetics to the control pads of various color editions (black or white). Built to compliment the control system solutions, the VK102 is suitable for conference rooms, lecture halls, digital podiums / lecterns, and any other applications that require desk / wall mounting installation.

• Supports ATEN VK0200 / VK112EU key pad series, VK320 touch panel, VE2812AEUT transmitter, and all the 3rd party EU/MK type devices
• Tilts devices at an ergonomic angle for effortless operations and cable connection
• Supports desk / wall mounting, with screw holes that assure secure attachment to the surface
• Anti-slip rubber at the bottom provides extra grip
• Ample space for easier cable routing through either the rear opening or the bottom
• Sleek, elegant design adds aesthetics to the control pads of either black or white edition
• Suitable for conference rooms, lecture halls, digital podiums / lecterns, and any other desk / wall mounting installation

Package Contents
1 x Tabletop Kit (EU, 2-Gang)
4 x anchors
4 x M4x18 screws
2 x M3x5 screws
6 x M3x8 screws
1 x user instructions

Compatible Accessories	Compatible with ATEN's keypad VK0200 and VK112EU, touch panel VK320, video transmitter VE2812AEUT, and any third-party EU/MK type device. Enclosure can be placed on a table or wall with screw holes that ensure secure attachment to the surface.
Physical Properties
Housing	Metal
Weight	0.58 kg ( 1.28 lb )
Dimensions (L x W x H)	15.12 x 10.13 x 8.73 cm (5.95 x 3.99 x 3.44 in.)

ATEN VE-RMK3U Video Extender Rack Mount Kit, 19" / 3U, suitable for VE800A, VE803, VE810, VE600A, VE602, VE560, CE100, VE601, VE801, VE901

The VK0200TTK is a fully-customizable 12-button Control Pad that integrates a controller with a keypad as an all-in-one solution. Aimed for small/medium meeting room or classroom control, the VK0200 offers a ready-to-use solution that easily connects the devices, configures via the intuitive VK6000 Configurator Software, and flexibly customizes keypad button functions and layout to fulfill most applications.

The ATEN Control System is an Ethernet-based management system that connects all the hardware devices found in a room for centralized control effortlessly. The VK0200 Control Pad not only plays the role as the main controller that connects the hardware devices, but also acts as a control interface with customizable buttons and layout. Created with flexibility in mind, the two-gang Control Pad can be laid out in 125 different combinations of 6 to 12 buttons that snap together as easy as Lego’s. By connecting to the local network, users will find it’s effortless using VK6000 software to configure the desired control of any connected device from the Control Pad. With the ready-to-go combo Control Pad, you have instant and smart control of the facilities from a Control Pad that can manage any device in the room.

VK0200 Control Pad

• Supports various interface connections:
  • 2 x RS-232 ports
  • 2 x Relay channels
  • 1 x Dgital input channel
  • 1 x Ethernet port
• Designed to mount in 2-gang EU-type and MK-type junction boxes
• Fully customizable with 125 layout combinations of 6 to 12 buttons
• Supports native KNX IP for building management systems
• Telnet, TCP, UDP, HTTP, HTTPS, ONVIF, and PJLink compliant
• Supports project file backup1
• Web GUI for easy system configuration
• Supports SSH communication for data monitoring2
• LED indication of connection and hardware status
• Dual-color LEDs for clear indication in dark environments
• Redundant power supplies – Power over Ethernet and DC 5V (optional)
• Customized button engraving service

VK6000 Configurator Software

• Simple profile setup with easy configuration steps via intuitive GUI
• Customizable GUI to be used on mobile devices and PC3
• Supports ControlAssist that allows PC control4
• Built-in Database Generator for device driver setup and overall device management
• Built-in ATEN Library comprising 10,000+ device drivers and complete ATEN VanCryst product drivers
• Two-way communication enables user-defined event monitoring to automatically trigger the next actions
• Test tool to verify commands in action before uploading the profile to the VK0200 Control Pad

Note:

1. Each ATEN Control Box is capable of backing up one project file.
2. The SSH protocol can be used for monitoring the receiving/transmission data of the Control Pad.
3. Additional license is required for mobile control.
4. For details on the supported PC control actions, refer to the ATEN Control System User Manual.

Package Contents:

• 1x VK0200 12-button Control Pad
• 1x Button Pack
• 6x Terminal Blocks
• 1x Faceplate
• 1x User Instructions

Interfaces
Keypad Layout	6~12 buttons customizable in 125 keypad layouts
Serial	• 2 x Bi-directional RS-232 Port (2 x 3-Pole Terminal Block Connector);  – Baud Rate: 300 to 115200 (default: 9600);  – Data Bit: 8 (default) or 7;  – Stop Bit: 1 (default) or 2;  – Parity: None (default), even or odd
Relay	• 2 x Relay Channel (2 x 2-Pole Terminal Block Connector); • Normally open, isolated Relays; • Contact Rating: Max 24 VDC, 1A
I/O	• 1 x Digital Input Channel (1 x 2-Pole Terminal Block Connector);  – VDC Mode Input Voltage Range: 0 to 5 VDC; Programmable Range: 1 to 5 VDC;  – Dry Contact Mode Pull-up 2k ohms to + 5 VDC
Ethernet	• 1 x RJ-45 Female, 10/100Base-T • Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH • DHCP-enabled.
Switches
Controller ID	1 x 16-segment Switch
Reset Button	1 x Semi-recessed Pushbutton
Power Consumption	DC5V:1.15W:5BTU DC48V:1.44W:7BTU
Environmental
Operating Temperature	0 – 50°C
Storage Temperature	–20 – 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Plastic
Weight	0.38 kg ( 0.84 lb )
Dimensions (L x W x H)	8.32 x 14.76 x 4.84 cm (3.28 x 5.81 x 1.91 in.)
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

The VK236 provides Ethernet-to-IR/serial connectivity with 6 IR / serial ports. It allows users to remotely access IR / serial devices from a PC or any system located anywhere. The complete Telnet CLI commands are fully integrated into users’ commercial and industrial applications.

What’s more, the VK236 serves as a flexible expansion box of the ATEN Control System, enabling users to control additional IR / serial devices through an ATEN controller in any environments where more devices are required. With the advantage of Ethernet-based connection, the expansion box can be easily connected to controllers via LAN connection from a variety of locations across a network.

• An Ethernet-to-IR / serial box ships with 6 IR / serial ports
• Supports Power over Ethernet (PoE) or DC power supply
• Supports Telnet CLI (command-line interface) mode for third-party system integration
• Supports Pronto formatted IR codes- IR command codes can be entered in Hex format
• WebUI provides VK236 system information, including firmware upgrade
• An expansion solution for connecting more IR / serial devices to ATEN Control System
• Flexible deployment via Ethernet connection
• Works with a connected ATEN controller with ID Switch through instant configuration

Package Contents

• 1x VK236 6-Port IR/Serial Expansion Box
• 1x Mounting Kit
• 6x Terminal Blocks
• 1x User Instructions

Interfaces
IR/Serial	6 x Programmable IR / Uni-directional RS-232 Port 6 x 2-Pole Terminal Block Connector IR: TTL level (0 to 5 V) – Carrier Frequency: 10KHz~455KHz; Serial: Uni-directional RS-232 ( + - 5 V) – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), Even or Odd
Ethernet	• 1 x RJ-45 Female, 10/100Base-T • Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH • DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0
Switches
Controller ID	1 x 16-segment Switch
Expander ID	1 x 8-segment Switch
Reset Button	1 x Semi-recessed Pushbutton
USB	1 x USB Type A (Firmware upgrade only)
Power Consumption	DC5V:1.31W:17BTU/h DC48V:1.64W:18BTU/h Note: ? The measurement in Watts indicates the typical power consumption of the device with no external loading. ? The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Environmental
Operating Temperature	0 – 50°C
Storage Temperature	–20 – 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Metal
Weight	0.45 kg ( 0.99 lb )
Dimensions (L x W x H)	13.00 x 7.58 x 4.20 cm (5.12 x 2.98 x 1.65 in.)

ATEN’s Video Extender Rack Mount Kit offers a range of flexible mounting solutions for installing ATEN video extenders and KVM extenders in a rack. You can choose from three VE-RMK rack mount kits (1U to 3U) to match the extender type you are installing which allows for a well-organized and easy-to-maintain setup.

• Standard 1U design fits into rack space neatly
• Fixed stand allows extenders to be safely installed on the rack
• Allows easy cabling and maintenance
• Provides flexible rack mounting for 1 to 4 extenders

Package Contents:

• 1x VE-RMK1U Frame
• 4x 1U Mounting Plates
• 5x Plastic Captive Screws
• 6x Hexagon Head Screws
• 12x Countersunk Head Screws