ATEN VE803 Video Extender HDMI, with USB and Audio, Extension up to max. 60m
The VE803 HDMI USB Extender extends an HDMI signal up to 60 meters from the HDMI source using two Cat 5e cables. It is capable of sending 1080i signals up to 60 meters and 1080p signals up to 40 meters. The VE803 is equipped with USB connectors which allow you to extend any USB device between the units. The USB feature also provides support for touch panel control, allowing you to control the local HDMI source device from the remote display, or control the remote display through the local unit. The VE803 is ideal for transportation centers, medical facilities, shopping malls or anywhere touch panel control or a kiosk is required. For flexibility and convenience, the VE803 local unit can be powered via the USB cable when connected to an appropriate source device. The VE803 is HDCP compliant, providing an easy and ideal HDMI extender solution for any application.
- Uses two Cat 5e cables to connect the local and the remote units
- Extends 1080p by 40m; extend 1080i by 60m
- Superior video quality – HDTV resolutions of 480p, 720p, 1080i, 1080p (1920 x 1080), VGA, SVGA, XGA, SXGA, UXGA and WUXGA (1920 x 1200)
- Supports USB touch panel
- 8 segment equalization adjustment switch optimizes display quality
- Support Dolby True HD and DTS HD Master Audio
- Built-in 8KV/15KV ESD protection
- Transparent USB Support – supports all USB 2.0 full speed device (up to 12 Mbps)
- Supports wide screen formats
- HDMI (3D, Deep Color); HDCP compatible – signaling rates up to 2.25Gbits
- Powered local unit via USB cable
- Video Input: Interface: 1x HDMI Type A Female (Black), Impedance 100 Ohms
- Video Output: Interface: 1 x HDMI Type A Female (Black), Impedance 100 Ohms
- Video: Max. Data Rate: 6.75 Gbps (2.25 Gbps Per Lane), Max. Pixel Clock: 225MHz, Compliance: HDMI (3D, Deep Color), HDCP Compatible / Max Resolutions/Distance: Up to 1080p@40m and 1080i@60m
- Audio: Input: 1x HDMI Type A Female (Black), Output: 1x HDMI Type A Female (Black)
- Control: USB: VE803T: 1x USB Type B Female / VE803R: 1x USB Type A Female
- EDID Settings: EDID Mode = Default
- Power Connector: 1x DC Jack / Consumption: VE803T: 5VDC, 1W & VE803R: 5VDC, 3,9W
- Environment: Operating Temp. 0~50°C, Storage Temp. -20~60°C, Humidity 0~80% RH, Non-Condensing
- Physical Properties: Housing Metal, Weight 0.16kg, Dimensions (LxWxH / x2): 9x5.74x2.4cm
ATEN VS381B Video Switch, 3-Port True 4K HDMI Switch
The VS381B 3-Port True 4K HDMI Switch with Auto Switching provides you to switch 3 HDMI input sources to an HDMI display. It supports video resolutions up to True 4K (4096 x 2160 @ 60Hz 4:4:4), data rates up to 18 Gbps, HDR, 3D, Deep Color, and HD lossless audio formats. Furthermore, the VS381B offers switching methods between HDMI sources by front panel pushbuttons and IR remote control, enabling users to effortlessly select desired input.
Featuring above functionalities provides you a practical solution for auditorium, home theater, meeting rooms, trade shows, shopping centers, and more.
Featuring above functionalities provides you a practical solution for auditorium, home theater, meeting rooms, trade shows, shopping centers, and more.
- Allows up to 3 HDMI input sources to be transmitted to 1 HDMI output display
- Superior video quality – True 4K resolution of 4096 x 2160 / 3840 x 2160 @ 60Hz (4:4:4) up to 5m; HDR supported
- HDMI (3D, Deep Color, 4K, HDR10+, Dolby Vision, HLG)
- HDCP 2.2 compliant
- Auto switching mode for auto port selection
- Switching between HDMI input sources via front panel pushbuttons and IR remote control
- Supports IR extension
- Supports 7.1 channel audio output
- Clear LED indication of device status
- Plug-and-play – no software installation required
- 1x VS381B 3-Port True 4K HDMI Switch
- 1x USB to DC Power Cord
- 1x IR Remote Control
- 1x IR Receiver
- 1x User Instructions
| Note | USB to DC cable as the main power source; In some circumstances power from HDMI maybe sufficient for the device; however, the power source from USB via USB to DC cable is recommended for device operation |
| LEDs | |
| Input | 3 x HDMI-In (Green) |
| Power | 1 x Power LED (Green) |
| Pushbuttons | |
| Select | 1 x push button (input selection) |
| Audio | |
| Input | 3 x HDMI Type A Female (Black) |
| Output | 1 x HDMI Type A Female (Black) |
| Video Input | |
| Interfaces | 3 x HDMI Type A Female (Black) |
| Impedance | 100 O |
| Max. Distance | Max 5m @ Up to 4096 x 2160 / 3840 x 2160 @ 60Hz (4:4:4) |
| Video Output | |
| Interfaces | 1 x HDMI Type A Female (Black) |
| Impedance | 100 O |
| Max. Distance | Max 5m @ Up to 4096 x 2160 / 3840 x 2160 @ 60Hz (4:4:4) |
| Video | |
| Max. Data Rate | 18 Gbps (6 Gbps Per Lane) |
| Max. Pixel Clock | 600 MHz |
| Compliance | HDMI 2.0 (3D, Deep Color, 4K, HDR10, Dolby Vision) HDCP 2.2 |
| Max. Resolution | 4096 x 2160 / 3840 x 2160 @ 60Hz (4:4:4) |
| Control | |
| IR | 1 x Mini Stereo Jack Female (Black) / Max distance@ 5m |
| Connectors | |
| Power | 1 x DC Jack |
| Power Consumption | DC5V:1.46W:6BTU |
| Environmental | |
| Operating Temperature | 0-40 °C |
| Storage Temperature | -20 - 60 °C |
| Humidity | 0 - 80% RH, Non-Condensing |
| Physical Properties | |
| Housing | Metal |
| Weight | 0.15 kg ( 0.33 lb ) |
| Dimensions (L x W x H) | 7.16 x 7.90 x 2.55 cm (2.82 x 3.11 x 1 in.) |
| Carton Lot | 20 pcs |
| Note | For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format. |
InLine® Cable Splitter HDMI 2-port, 4K/60Hz, with USB power cable, 0.5m
This InLine® HDMI splitter 2-fold, 4k/60Hz splits an HDMI input signal to two HDMI output devices. The video and audio signal is duplicated and can be output simultaneously on both playback devices. If two or more HDMI splitters are cascaded, they can produce a larger distribution and length. The HDMI splitter is ideal for retail TV and showrooms, set-top boxes, Blu-ray players and projectors, or applications such as security, data center control, information sharing, conference room presentations, and training.
- Installation takes seconds without requiring extensive adjustments.
- HDCP according to HDCP Revision 1.4/2.2 specification
- Supports HDTV resolutions up to 4K/60Hz
- Supports Deep Color 12-bit
- Supports LPCM 7.1CH and DTS-HD Master Audio
- Supports Full 3D
- Input: 1x HDMI (Type A connector on cable, 0.5m)
- Outputs: 2x HDMI (Type A socket)
- Output resolution: 480i~1080p@50/60Hz, 1080p@24/50/60Hz, VGA~UXGA, 2K@60Hz, 4K@60Hz
- Housing material: Plastic
InLine® VGA + Audio Extender Receiver max. 300m via UTP / STP network Cable RJ45
InLine® VGA + Audio Extender Receiver max. 300m via UTP / STP network Cable RJ45
- Extend VGA video and stereo audio signal max up to 300m over one UTP cable with cross stand inside
- Adjusting GAIN and PEAK to adapt for the different length of network patch cable, GAIN: Brightness adjustment, PEAK: Skew adjustment
- Supports resolution max up to 1920 x 1200
- Interface: 1 VGA output,1 3.5 mm jack output, 1 UTP input
- Work with monitors, projectors, HDTV and flat panels
InLine® RCA Audio over LAN / Ethernet / RJ45 Cable 2pcs. one set
This easy to use adapters provides the audio signals through patch cables, so audio can even be transported via a passive structured cabling from room to room (without active network devices).
- Set of 2 adapters, transmitter and receiver
- 2x RCA male plug to RJ45 female port
- max. patch cable length 50m, depending on wire diameter and contact resistance
- for analog stereo audio signals
- adapters cable length: 2x 10cm
InLine® VGA + Audio Extender Sender max. 300m via UTP / STP network Cable RJ45
- Extend and split VGA video and stereo audio signal max up to 300m over one UTP cable with cross stand inside
- Adjusting GAIN and PEAK to adapt for the different length of network patch cable, GAIN: Brightness adjustment, PEAK: Skew adjustment
- Supports resolution max up to 1920 x 1200
- Dual output at local unit: 1 x VGA output for local site, plus 2 x UTP output for remote site
- Work with monitors, projectors, HDTV and flat panels
InLine® RJ45 switch manual
This manual change-over switch enables easy splitting of signals such as telephone, ISDN, network or similar via the RJ45 interface between one input and 2 outputs or vice versa. Switching is purely mechanical, no additional power supply is required. The shielding is not used.
- Manual RJ45 switch, 1 device to 2 devices or vice versa
- 2x RJ45 socket to 1x RJ45 socket
- 1:1 assignment, unshielded
- Network transfer rate up to 100 Mb/s
InLine® Serial switch manual, RS232, 9-pin Sub-D
This manual data switch enables easy splitting of serial signals or similar via the 9-pole Sub-D interface between one input and 2 outputs or vice versa. The switchover is purely mechanical, no additional power supply is required. The shielding is occupied
- Manual Sub-D switch 9-pole, 1 unit to 2 units or vice versa
- 2x Sub-D plug (male) to 1x Sub-D socket (female)
- 1:1 assignment, shielded
ATEN Video Splitter HDMI splitter, UHD 4K2K
The VS184A HDMI Splitter is the perfect solution for anyone who needs to send one source of digital high definition video to four displays at the same time. It supports all HDMI-enabled equipment, such as DVD players, satellite set-top boxes and all HDMI displays. The VS184A HDMI Splitter is HDCP (High Bandwidth Digital Content Protection) compliant, making it effective for use with all HDMI displays in home theater applications, as well as in corporate, educational and commercial settings.
- connects one HDMI source to four HDMI displays at the same time
- HDMI (3D, Deep Color, 4kx2k) / HDCP Compatible
- supports resolutions of up to Ultra HD 4kx2k and 1080p Full HD
- supports Dolby True HD and DTS HD Master Audio
- long distance transmission: up to 15m (24 AWG)
- supports up to 340MHz bandwidth for high performance video
- signaling rates up to 3.4 Gbits in support of 1080p display
- "Plug and Play": no software installation required
InLine® HDMI Splitter/Distributor, 2-port, 4K2K compatible
This HDMI Splitter is the perfect solution for all those high-definition digital video signals would show on two screens simultaneously. Apply it with multiple HDMI-enabled devices, like your DVD player, HDMI projector and other HDMI displays.
- Video: 3D, HD, HDCP, 4Kx2K
- Audio: Dolby Digital Plus, DTS-HD, TrueHD
- Cascade distance: Source of 1.8m, from device to device - 15m, 15m from device to display
- Supports 12-bit Deep Color per Colour channel, 36-bit in summary
- HDCP 1.3 compliant
- Aluminum housing
- LED display
- Plug and play - no software installation required
- This finds application in areas of your home theater system, presentations, training sessions or video conferences
- with 5V DC / 2A power adapter
InLine® 3.5mm Audio over LAN / Ethernet / RJ45 Cable max. 50m complete set
This easy to use adapters provides the audio signals through patch cables, so audio can even be transported via a passive structured cabling from room to room (without active network devices).
- Set of 2 adapters, transmitter and receiver
- 2x 3.5 mm stereo plug to RJ45 female port
- max. patch cable length 50m, depending on wire diameter and contact resistance
- for analog stereo audio signals
- adapters cable length: 2x 10cm
ATEN VE811 HDMI HDBaseT Extender, 4K2K, 100m
The ATEN VE811T HDMI HDBaseT Extender guarantees the optimum 4K HDMI signal transmission across up to100 m via a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable. In addition, with the support for Long Reach Mode, it extends HDMI signals @ 1080p up to 150 m via a single Cat 5e/6 cable. The VE811T meets HDMI specification features including 3D, Deep Color, HD lossless audio formats and CEC pass-through. Plus, it supports Dolby Digital 7.1 ch and DTS HD audio.
Pushing the technology and design to the limit, the compact design makes the VE811T easy to mount in any location. Engineered for today’s digital trends, the VE811T is ideal for meeting rooms, or any setting that requires high quality HDMI video to be extended for great distances.
Pushing the technology and design to the limit, the compact design makes the VE811T easy to mount in any location. Engineered for today’s digital trends, the VE811T is ideal for meeting rooms, or any setting that requires high quality HDMI video to be extended for great distances.
- HDBaseT connectivity – extends 4K HDMI signals up to 100m via a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable
- Supports HDBaseT Long Reach Mode – up to 150 m via a single Cat 5e/6 cable at resolutions up to 1080p
- HDMI (3D, Deep Color, 4K)
- HDCP 2.2 compatible
- Supports resolutions of up to 4K and 1080p
- Consumer Electronic Control (CEC) allows interconnected HDMI devices to communicate and respond to a single remote control
- Supports wide screen format
- Plug and play – no software required
- Built-in 8kV / 15kV ESD protection
- Rack mountable
- 1x VE811T HDMI HDBaseT Transmitter
- 1x Power Adapters
- 1x User Instructions
| Video Input | |
| Interfaces | 1 x HDMI Type A Female (Black) |
| Impedance | 100 O |
| Max. Distance | 3 m |
| Video | |
| Max. Data Rate | 10.2Gbps (3.4Gbps per lane) |
| Max. Pixel Clock | 340 MHz |
| Compliance | HDMI (3D, Deep Color, 4K) HDCP2.2 Compatible Consumer Electronics Control (CEC) |
| Max. Resolutions / Distance | Up to 4K@70m (Cat 5e/6) / 100m (Cat 6a/ATEN 2L-2910 Cat6); 1080p@100m (Cat 5e/6/6a) *4K supported: 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0); 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4) |
| Audio | |
| Input | 1 x HDMI Type A Female (Black) |
| Connectors | |
| Unit To Unit | 1 x RJ-45 Female |
| Firmware Upgrade | 1 x Mini Stereo Jack Female (Black) |
| Power | 1 x DC Jack (Black) with locking |
| Switches | |
| Long Reach Mode Switch | 1 x Slide Switch - ON/OFF |
| Power Consumption | DC5V:3.77W:18BTU/h Note: The measurement in Watts indicates the typical power consumption of the device with no external loading. The measurement in BTU/h indicates the power consumption of the device when it is fully loaded. |
| Environmental | |
| Operating Temperature | 0 - 40°C |
| Storage Temperature | -20 - 60°C |
| Humidity | 0 - 80% RH, Non-Condensing |
| Physical Properties | |
| Housing | Metal |
| Weight | 0.16 kg ( 0.35 lb ) |
| Dimensions (L x W x H) with bracket | 8.64 x 7.30 x 2.47 cm (3.4 x 2.87 x 0.97 in.) |
| Dimensions (L x W x H) without bracket | 8.20 x 5.20 x 2.37 cm (3.23 x 2.05 x 0.93 in.) |
ATEN UCE260 USB 2.0 extension up to 60m via RJ45 Cat. 5/5e/6 cable
UCE260 can easily send the USB signals via Ethernet Cable up to 60 meters (196 ft) at data rate of High Speed (480Mb/s) , Full Speed (12Mb/s) and Low Speed (1.5Mb/s). Without any configuration or software driver, this USB extender allows you to extend your USB device or hub up to 60m from your computer, which overcomes the typical USB cable limitation.
- Supports any High-Speed (480Mb/s), full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB devices
- Extends signal transmission distance of a USB devices up to 60m via an Ethernet Cable
- Includes an AC adapter to stabilize power supply
- Hot-Pluggable
- The most cost-effective USB extender solution
- No additional software driver required
- 1x Local Unit with USB Cable
- 1x Remote Unit
- 1x Power Adapter (5V, 2.6A)
- 1x User Instructions
| Function | Local Unit | Remote Unit |
| Connectors | ||
| USB Port | 1 x USB Type A Male | 1 x USB Type A Female |
| Link | 1 x RJ45 Female | 1 x RJ45 Female |
| Power | N/A | 1 x DC Power Jack |
| USB Specification | 2.0 For High / Full / Low Speed | 2.0 For High / Full / Low Speed |
| USB Devices Supported | N/A | 1 Device ?Note?Please verify the compatibility of the USB video device with the manufacturer. |
| Power Consumption | DC5V:0.65W:3BTU/h Note: ? The measurement in Watts indicates the typical power consumption of the device with no external loading. ? The measurement in BTU/h indicates the power consumption of the device when it is fully loaded. | DC5V:0.95W:15BTU/h Note: ? The measurement in Watts indicates the typical power consumption of the device with no external loading. ? The measurement in BTU/h indicates the power consumption of the device when it is fully loaded. |
| Environmental | ||
| Operating Temperature | 0–40°C | 0–40°C |
| Storage Temperature | -20–60°C | -20–60°C |
| Humidity | 0–80% RH, Non-condensing | 0–80% RH, Non-condensing |
| Physical Properties | ||
| Housing | Plastic | Plastic |
| Weight | 0.04 kg ( 0.09 lb ) | 0.02 kg ( 0.05 lb ) |
| Dimensions (L x W x H) | 6.30 x 3.10 x 2.19 cm (2.48 x 1.22 x 0.86 in.) | 6.30 x 3.10 x 2.19 cm (2.48 x 1.22 x 0.86 in.) |
InLine® RCA Audio over LAN / Ethernet / RJ45 Cable max. 50m complete set
This easy to use adapters provides the audio signals through patch cables, so audio can even be transported via a passive structured cabling from room to room (without active network devices).
- Set of 2 adapters, transmitter and receiver
- 2x RCA male plugs to RJ45 female port + 1x 3.5 mm stereo plug to RJ45 female port
- max. patch cable length 50m, depending on wire diameter and contact resistance
- for analog stereo audio signals
- adapters cable length: 2x 10cm
ATEN Video Splitter HDMI splitter True 4K at 60 Hz
The VS184B True 4K HDMI Splitter is the perfect solution for anyone who needs to send one source of digital high definition video to four displays at the same time. It supports all HDMIenabled equipment, such as DVD players, satellite set- top boxes and all HDMI monitors, displays, projectors, or TVs. The VS182B True 4K HDMI Splitter is HDMI 2.0 compliant, 4K at 60Hz (4:4:4), and supports multiple streaming audio, making it effective for use with all HDMI displays in home theater applications, as well as in corporate, educational and commercial settings.
- Connects one HDMI source to four HDMI displays at the same time
- HDMI (3D, Deep Color, 4K); HDCP 2.2 Compatible
- Supports HDR
- Supports max resolutions of up to 4096 x 2160 / 3840 x 2160 @ 60 Hz (4:4:4)
- Long distance transmission- up to 15 m(1920x1200) / 1.8m (True 4K, Compatible with ATEN 2L-7D02H HDMI cable)
- Max pixel clock rate up to 600 MHz
- Max data rate up to 18 Gbps (6 Gbps per lane)
- LED indication of power status and source devices
- EDID Expert™ – Selects optimum EDID settings for smooth power-up, high-quality display and use of the best video resolution via EDID DIP Switch, allowing users to effortlessly switch among Port 1, Default, and Auto
- Plug-and-play – No software installation required
- Package Contents: 1x VS184B 4-Port True 4K HDMI Splitter, 1x Power adapter, 1x HDMI cable, 1x User Instructions
| Video Input | |
| Interfaces | 1 x HDMI Type A Female (Black) |
| Impedance | 100 Ohms |
| Max. Distance | 1.8m / 4K@60Hz (4:4:4) |
| Video Output | |
| Interfaces | 4 x HDMI Type A Female (Black) |
| Impedance | 100 Ohms |
| Max. Distance | 1.8m / 4K@60Hz (4:4:4) 15m / 1920 x 1200 |
| Video | |
| Max. Data Rate | 18Gpbs (6 Gbps Per Lane) |
| Max. Pixel Clock | 600 MHz |
| Compliance | HDMI (3D, Deep Color, 4K); HDCP Compatible |
| Max. Resolution | Up to 4096 x 2160 / 3840 x 2160 @ 60Hz (4:4:4) |
| Audio | |
| Input | 1 x HDMI Type A Female (Black) |
| Output | 4 x HDMI Type A Female (Black) |
| Power | |
| Connectors | 1 x DC Jack |
| Consumption | 5 VDC, 4.84W |
| Environmental | |
| Operating Temperature | 0-40 °C |
| Storage Temperature | -20 - 60 °C |
| Humidity | 0 - 80% RH, Non-Condensing |
| Physical Properties | |
| Housing | Metal |
| Weight | 0.48 kg ( 1.06 lb ) |
| Dimensions (L x W x H) | 20.00 x 8.00 x 2.50 cm (7.87 x 3.15 x 0.98 in.) |
| Carton Lot | 20 pcs |
| Note | For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format. |
InLine® HDMI Videowall controller, Full-HD
This stand-alone video wall controller has been designed to use high-quality multiple displays and can duplicate or enlarge a video source and distribute it to up to four monitors. With the InLine® HDMI Video Wall Distributor you can combine 4 monitors with a max. screen resolution of 1920x1200 to a large video wall (2x2 monitors). For the input signal you have an HDMI or VGA interface available. The InLine® HDMI Video Wall Distributor is easily controlled via an IR remote control. The extended frame compensation can help to optimally adapt the picture to the video wall. The InLine® HDMI Video Wall Distributor is the ideal solution for all professional video applications such as digital signage, advertising, A/V splitting or broadcasting.
- Create a 2x2, 1x4, 4x1 video wall from any Hi-Def source, using four HDTV displays
- Split and scale a single Hi-Def source to four displays
- Input and Output resolutions up to 1080p Full HD and 1920x1200 (WUXGA) with HDCP compliant
- Easy to use on-screen display user interface
- Advanced Bezel Compensation feature provides compatibility with virtually any screen frame width, and allows for accurate display of the image
- IR remote control
- USB port for upgrade (reserved for future product enhancements)
- Locking power supply connector
- Wall-mountable enclosure, mount ears included
- Dimension (LxWxH): 120x134x26mm
- Weight: 470g
- Video Out: HDMI Port x4 (Lockable)
- Video In: HDMI Port x1 (Lockable), VGA x1
- Audio In: 3.5mm Earphone Jack x1
- USB: Mini-USB x1
- IR: 1 x Receiver, 1 x IR Extender (3.5mm Earphone Jack, optional)
- LED Indicator: Red x 1 (Power), Green x 1 (Video)
- Power Adapter: 5V4A (with lock)
- Housing: Metal
- Operation Temperature: 0 ~ 40°C
- Storage Temperature: -20 ~ 60°C
- Humidity: 0~90% RH, Non-condensing
InLine® USB 2.0 switch manual
This manual switch enables easy sharing of one USB 2.0 device with USB-A connection to 2 computers. The switch is purely mechanical, no additional power supply is required.
- Manual USB switch, 1 USB device to 2 computers
- 2x USB socket type B, 1x USB socket type A
- Required cables (2x, optional): USB cable plug A to plug B for connection to the computers
- Additional USB devices can be connected via an optional USB hub (not included)
ATEN US224 USB 2.0 Data Switch, 4x USB 2.0 device to 2 computer
2-Port USB Peripheral Sharing Device. The US224 is a 2-port USB peripheral sharing device that enables 2 computers to share the use of 4 USB devices - a keyboard, mouse and up to two peripheral devices. It eliminates the added expense of having a separate USB keyboard, mouse and peripheral device(s) for each computer. The US224 all-in-one design allows for a neat and tidy installation ? no need to connect 2 separate USB cables to the computer, thus eliminating cable clutter. For extra convenience, it features an external remote port selector that can simplify desktop layout, and select which computer needs to use the USB devices. US224 is the ideal way to share USB peripherals in a multimedia office environment.
- 4 built in USB ports ? all-in-one design allows for a neat and tidy installation that reduces cable clutter
- Enables 2 computers to share 4 USB devices ? a USB keyboard, mouse and up to two peripheral devices
- Simple port selection via remote port selector for convenient switch placement
- USB 2.0 compliant
- Multiplatform support ? Windows, Linux ,Mac and Sun
- LED indicators display port focus
- Overcurrent protection
- Non-powered (supports optional USB power adapter)
- Hot pluggable
- Computer Connections: 2
- Computer Selection: Remote port selector
- Connectors Computer: 2 x USB Type A Male (Black), Device: 4 x USB Type A Female (Black), Power (Optional): 1x USB mini B Female (Black)
- Cable Length USB Cable: 2x 1.2 m
- Remote Port Selector: 1.8 m
- LEDs: 2 (Green)
- Environment: Operating Temp.: 5-40°C, Storage Temp.: -20-60°C, Humidity: 0 - 80% RH, Non-condensing
- Physical Properties: Housing Plastic, Weight 145g, Dimensions (L x W x H): 11.10 x 7.80 x 2.50 cm
| Computer Connections | 2 |
| Port Selection | Remote port selector |
| Connectors | |
| Computer | 2 x USB Type A Male (Black) |
| Device | 4 x USB Type A Female (Black) |
| Power (Optional) | 1 x USB mini B Female (Black) |
| Cable Length | |
| USB Cable | 2 x 1.2 m |
| Remote Port Selector | 1.8 m |
| LEDs | |
| Selected | 2 (Green) |
| Environmental | |
| Operating Temperature | 0–40°C |
| Storage Temperature | -20–60°C |
| Humidity | 0–80% RH, Non-condensing |
| Physical Properties | |
| Housing | Plastic |
| Weight | 0.14 kg ( 0.31 lb ) |
| Dimensions (L x W x H) | 8.24 x 6.65 x 2.53 cm (3.24 x 2.62 x 1 in.) |
ATEN US234, 2-port USB 3.0 peripheral sharing device
ATEN US234 is a 2-port USB 3.0 peripheral sharing device that allows users to share four USB devices between 2 different computers. US234 is USB 3.0 compliant, which can support data transfer rate up to 5Gbps and backwards compatible with USB 2.0 and USB1.1. It is perfect for high-bandwidth devices, such as USB docking stations or HD cameras. In addition, US234 also features an external remote port selector that can simplify desktop layout, and select which computer needs to use the USB devices. With its compact and all-in-one design, you can create a space saving, convenient and productive work environment.
- enables two computers to share four USB 3.0 devices
- simple port selection via remote port selector for convenient switch placement
- USB 3.0 compliant, supporting data transfer rates of up to five Gbps
- LEDs indicates which computer is active
- Over-current protection
- multiplatform support: Windows, Linux and Mac
- Bus-powered
- Micro USB power jack for additional power supply
- Hot pluggable, no driver or software required
- Package Contents: 1 x US234 2-Port USB 3.0 Peripheral Sharing Device, 2 x USB 3.0 Type-B to Type-A Cables, 1 x Remote Port Selector, 1 x User Instructions
InLine® HDMI Switch, 4K2K@60Hz, HDCP 2.2
This lnline® HDMI Switch is exclusively used to connect several USB sources (e.g. DVD Player, Blu-Ray Player, Game Consoles, etc.) with one output device (e.g. Monitor, TV, Beamer, etc.). The selection of the
playback devices is possible by the button an the front of the product or by the supplied remote control.
playback devices is possible by the button an the front of the product or by the supplied remote control.
- Input voltage/current: 5V/DC, max. 2A
- Power: 5W max.
- Max. Resolution: 4.096x2.160@ 60Hz
- Connection input: 3 x HDMI
- Connection output: 1 x HDMI
- Vertical frequency range: 50/60Hz
- Video bandwidth: 6Gb/s / 600MHz per channel, 18Gb/s total
- HDR is supported
- Dimensions: approx. 117 x 65 x 28mm (L x W x H)
USB1.1 extension up to 60m via RJ45 Cat. 5e cable, Aten UCE60
UCE60 lets you locate your USB device or hub up to 60m (198 ft) from your computer, overcoming the typical USB cable limitation. It conditions the USB signals to communicate up to 60m using low-cost Ethernet cable.
- USB 2.0 full speed compliant
- Provides support for any full-speed (12Mb/s) or low-speed (1.5Mb/s) USB devices
- Extends the transmission distance of a USB device up to 60m (198 ft) using Ethernet cable
- Embedded USB Transceivers prevent signal loss
- Lowest cost solution for extending USB signals
- No additional installation software required
- LED indicates when additional external power supply needed
- Multiplatform support: Windows, Mac
- 1x Local Unit (1 ft USB Cable attached)
- 1x Remote Unit
| Function | Local Unit | Remote Unit |
| Connectors | ||
| USB Port | 1 x USB Type A Male (White) | 1 x USB Type A Female (White) |
| Link | 1 x RJ-45 Female | 1 x RJ-45 Female |
| Power | N/A | 1 x DC Jack (Optional) |
| USB Specification | 2.0 Full / Low Speed | 2.0 Full / Low Speed |
| Environmental | ||
| Operating Temperature | 0–40°C | 0–40°C |
| Storage Temperature | -40–85°C | -40–85°C |
| Humidity | 0–80% RH, Non-condensing | 0–80% RH, Non-condensing |
| Physical Properties | ||
| Housing | Plastic | Plastic |
| Weight | 0.03 kg ( 0.09 lb ) | 0.02 kg ( 0.05 lb ) |
| Dimensions (L x W x H) | 6.30 x 3.10 x 2.19 cm (2.48 x 1.22 x 0.86 in.) | 6.30 x 3.10 x 2.19 cm (2.48 x 1.22 x 0.86 in.) |
InLine® AV Switch manual, RCA IN/OUT
This manual media switcher allows easy splitting of audio and video signals the analogue RCA interface between one input and 2 outputs or vice versa. Switching is purely mechanical, no additional power supply is required. The shielding is occupied.
- Manual audio/video switch 3-way RCA, 2 AV inputs to 1 AV output or vice versa
- 9x RCA socket (3x red, 3x white, 3x yellow)
- 1:1 assignment, shielded
- Metal housing
- for analogue audio/video signals
InLine® HDMI Splitter/Distributor, 4-port, 4K2K@60Hz compatible
This powerful HDMI splitter distributes one HDMI input to four HDMI outputs and supports 4K2K@60Hz, 3D, 12-bit deep colour and lossless high definition audio. With its 3Gbit/s bandwidth and the additional functions of the latest HDMI standards, you can rely on high-quality HDMI distribution.
- HDMI specification 2.0
- Integrated HDCP decryption/encryption, compatible with HDCP specification Rev. 1.4/2.2
- Frequency range: 25 MHz - 600 MHz
- HDTV resolutions max. 4K2K@60Hz (3840x2160 pixels), Deep Colour 12-bit
- LPCM 7.1 channel, Dolby TrueHD and DTS-HD Master Audio
- 3D
- Plug-in power supply: 5.0 V / 2.0 A
- Input voltage 100-240 V AC
- Input AC frequency ~50/60Hz, 0.4 A
- Output voltage 5.0 V DC
- Output current max. 2.0 A Output power 10.0 W
- Average efficiency in operation 79.96%
- Power consumption at no load 0.08 W
ATEN Video Splitter DVI Monitor Splitter with Audio
VS162 KVM Splitter provides DVI video and audio input signals to 2 DVI video and audio outputs after duplication and boosting. They are ideal for any type of broadcasting environment, classrooms, or by power computer users.
- Connects computers with DVI graphics to multiple DVI compatible monitors or projectors
- Fully compliant with DVI-Digital and DVI-Analog
- Supports DDWG (Digital Display Working Group) standard for DVI compliant monitors
- Speaker enabled for audio enjoyment
- Cascadable to 3 levels - provides up to 8 video signals
- Installs in minutes
- Maintains highest single link video resolution (up to 1920 x 1200)
- DDC, DDC2, DDC2B Compatible (Port 1 only)
- OS Support: Windows 2000, Windows XP, Linux, Mac and Sun
- Package Content: 1x 2-Port DVI Video Splitter, 1x Power Adapter, 1x User Manual
