For environmental monitoring and management, ATEN provides sensor probes that work in tandem with the Power Distribution Units, which enable you to get readings of temperate and humidity. Environmental conditions can be monitored with alarms according to customizable minimum/maximum thresholds set for temperature and humidity.

*The Sensor is an optional accessory. You can use the ATEN PDU without environmental sensors. However, if you want to have complete energy management of your data center with the full use of ATEN solutions, a sensor installation is required.

• Measurement range: – °C (Temperature); 30 – 80 % RH (Humidity)
• Measurement accuracy: +/- 1°C (Temperature); +/- 3 % RH (Humidity)
• Compact design – built in 3m cable
• High sensitivity

Package Contents

• 1x EA1240 Temperature & Humidity sensor
• 1x Sensor mount
• 4x Tie wrap
• 3x Adhesive cable tie holder

Connectors	RJ-11 Male
Measurement
Range	Temperature: 0 - 40°C Humidity: 30– 80% RH
Accuracy	Temperature: +/- 1°C Humidity: +/- 3 % RH
Supply Voltage	5 VDC (Max)
Current Consumption	5mA(Max); 2mA(Avg.)
Environmental
Operating Temperature	0 - 55°C
Storage Temperature	-20 - 70°C
Humidity	< 95% RH
Physical Properties
Housing	Plastic
Weight	0.06 kg
Cable Length	3 m

For the security of your data center, ATEN provides Photo Door sensor probes that work in tandem with the Power Distribution Units, which allows the monitoring of a rack mounted enclosure´s door access, notifying users when a door has been opened. Various conditions can be monitored with alarms according to customizable minimum/maximum settings.
* The Sensor is an optional accessory and you can use the ATEN PDU without the door sensors. However, if you want to have complete security management of your data center with the full use of ATEN solutions, a sensor installation is required.

**Support PE7/PE8/PE9 series only

• The Photo Door Sensor allows the monitoring of a rack mounted enclosure´s door access  –  notifying users when a door has been opened
• High sensitivity
• Easy operation

Sensing distance	10 cm
Operating voltage	10 – 30 VDC; Ripple < 20 % Peak to Peak
Current Consumption	30 mA (max.)
Output method	NPN & PNP Two Output
Output status	Normal open NO type
Output current	150 mA (max.)
Leakage current	0,8 mA (max.)
Residual voltage	0,6 mA (max.)
Protection circuit	Short Circuit and Polarity Protection
Sensor Response Time	1 ms (max.)
Sensitivity adjuster	270° Trimmer
Hysteresis	10 % of Sensing Distance Max
Emitter	Infrared LED
Illumination	Sunlight < 10.000 Lux; Lamplight < 5.000 Lux.
Physical Properties
Housing	Plastic

Package Contents

1x Photo Door Sensor
1x Adjustment Tool
2x Screw
1x Bracket
1x hook-and-loop

The EA1540 capacitive leak sensor can automatically detect any liquid in close proximity to the connected PDU and inform the user about it. When liquid is detected, the EA1540 will alarm and illuminate its red LED to demand immediate attention and response. This effectively reduces the risk of damage to the PDU and the devices powered. It is ideal for PDU installation environments such as underground data centers located underground.

Suitable for a wide range of applications, the EA1540 features a compact and non-disruptive design that it allows him to avoid external signals interfering with normal operation while saving valuable space for critical work. It is built from corrosion-resistant materials, making it adaptable to hazardous environments.

The EA1540 is the perfect solution for anyone who needs to ensure day-to-day operation of the PDU and prevent potential risks of equipment damage in advance .

Scope of delivery:
1 x capacitive leakage sensor, 1x wiring diagram

Compatible ATEN PDU models: Rack PDUs: PE4104G, EC1000, PE7216, PE7324, PE8216, PE8324

Protection	IP-66
Physical Properties
Housing	PP
Cable type	2m( 22 AWG)
Insulation strength	100 MOhm / 500 VDC
Dielectric strength	2.5 kV per minute
Residual ripple	10% peak-valley value
Operating voltage	10~ 30 VDC
Power consumption	20 mA max
Output Method	NPN
Output Status< /td>	NO
Output current	150 mA max.< /td>
Leakage current	0.1 mA max.
0.1 V max.
Protection circuit	Short circuit & Reverse polarity
Sensitivity controller	270° Trimmer

Energy Box The EC1000 Energy Box is the latest evolution of NRGence™ - ATEN's energy intelligence solutions. It is the intelligent, cost effective solution to monitor ATEN's Energy PDUs - to ensure safe and effective energy-saving power management. The EC1000 Energy Box has four Energy Sensor ports to connect to four Energy PDU modules and four Environment Sensor ports for external sensors to monitor environmental conditions. Each environmental sensor can provide measured readings of temperature, humidity, and differential pressure from separate areas of a data room, giving a wide range of monitoring and protection you need. The Energy Box allows power and environmental data to be monitored and displayed at the rack or remotely for easy viewing and maintenance. The Energy Box is a standalone unit with Over IP monitoring that is controlled by Web GUI or ATEN´s eco Sensors software. The EC1000 Energy Box features real-time status, system logs, threshold alerts, and event notifications. The EC1000 logs power and environmental conditions according to customizable minimum/maximum thresholds set for electrical current, temperature, humidity, and differential pressure.Features

• Space saving 1U rack mounting with front and rear mounting
• 4 RJ-45 Energy Sensor Ports to monitor four Energy PDU currents (0A to 32A per port)
• 4 RJ-11 Environment Sensor Ports to monitor temperature, humidity, and differential pressure (Requires external sensors)
• Maximum Amperage Monitor 32A@100V~240V (Energy Box)
• 3 digit 7 segment front panel LED displays current/sensor/IP address information
• Threshold monitoring for: 1. Current, 2. Temperature (Requires external sensors), 3. Humidity (Requires external sensors), 4. Differential pressure (Requires external sensors)
• Threshold alerting through: 1. Local: audible alarm and LED lights, 2. Remote: SMTP/SNMP trap/Syslog
• Front panel LED indicators for current, temperature (requires external sensors), humidity (requires external sensors) and differential pressure (requires external sensors), and IP address information at the Energy Box
• Remote real-time current, temperature (requires external sensors), humidity (requires external sensors), and differential pressure (requires external sensors) monitoring and management
• Management through eco Sensors Energy Management Software or 3rd party SNMP manager
• Supports name assignment for individual Energy PDUs
• Event Logging - 128 line event log
• Syslog support
• Firmware upgradable
• Remote management via TCP/IP using built in 10/100Mbps Ethernet port
• Management via built in browser based GUI
• Network Interfaces: TCP/IP, UDP, http, HTTPS, SSL, SMTP, DHCP, NTP, DNS, 10Base-T/100Base-TX auto sense, Ping
• Supports SNMP Manager V1, V2, V3
• Strong security features include password protection and advanced encryption technologies - utilizing 128 bit SSL
• RADIUS authorization and authentication

Specifications

• Energy PDU Connections: 4
• Port Selection: Pushbutton
• Connectors Energy Sensor: 4 x RJ-45 Female
• Connectors Environment Sensor: 4 x RJ-11 Female
• Connectors Power: 1 x DC Jack
• Connectors LAN: 1 x RJ-45 Female
• Switches Reset: 1 x Semi-recessed Pushbutton
• Switches Selection: 1 x Selection Pushbutton

LEDs

• PDU Status: 4 (Orange)
• Sensor Status: 4 (Green)
• Energy/Environment/IP: 3 (Green)
• Selection: 1 digit, 7-segment (Orange)
• Current / Sensor / IP Address: 3 digit, 7-segment (Orange)
• Power: 1 (Blue)
• LAN 10/100 Mbps: 1 (Orange/Green)
• LAN Link: 1 (Green)

Monitoring Range: 100-240 V, 50/60 Hz, 0 A to 32 A (per port), LED Display Resolution 0.1 A, Precision: ± 0,1 A @ 0 ~ 1 A, ±1 % > 1 APower Consumption: 5.3 V Environment:

• Operating Temp.: 0 - 50°C
• Storage Temp.: -20 - 60 °C
• Humidity: 0-80% RH, Non-condensing

Physical Properties

• Housing: Metal
• Weight: 0.59 kg
• Dimensions (L x W x H): 20.00 x 7.59 x 4.20 cm

Package Contents

• 1x EC1000 Energy Box
• 1x Power Adapter
• 1x Mounting Kit
• 4x RJ-45 Cables
• 1x CD ROM (Manual, eco Sensors Software)
• 1x User Instructions

For environmental monitoring and management, ATEN provides sensor probes that work in tandem with the Power Distribution Units, which enable you to get readings of Differential Pressure & Temperature. Environmental conditions can be monitored with alarms according to customizable minimum/maximum thresholds set for temperature and humidity.
* The Sensor is an optional accessory and you can use the ATEN PDU without environmental sensors. However, if you want to have complete energy management of your data center with the full use of ATEN solutions, a sensor installation is required.

• Measurement range: -19-60°C (Temperature); +/- 500 Pa (Pressure)
• Compact design – built in 3 m cable
• High sensitivity
• Easy operation

Connectors	RJ11-4P4C
Measurement
Range	Temperature: -19-60°C Pressure: +-500 Pa
Accuracy	Temperature: +-1 °C (0 – 40 °C) Pressure: +-1 % (15 – 35 °C) T.C: -0,1 Pa/°C
Power Consumption	5 VDC (Max), 3mA (Typical)
Umgebung
Operating Temperature	0 – 60 °C, < 95% RH Non-condense
Storage Temperature	0 – 40°C
Humidity	< 90% RH
Physical Properties
Housing	Plastic
Weight	0,09 kg
Cable Length	3 m

Package Contents

1x Differential Pressure & Temperature Sensor
2x Air Tube

The EA2100 Surge Protection Module prevents damage to equipment from power surges and spikes once installed on a PDU. The integrated surge protector includes a LED indicator, allowing users to know the status of their equipment.

Note: This accessory is not covered under ATEN's warranty policy.

• Surge protection
• Easy installation and removal
• LED indicator – allows users to know the status of their equipment

Package Contents

• 1x Surge Protection Module
• 1x user instructions

For better power stability, ATEN has developed the Smart-Lock Plug Connector to secure the connection of a power cord’s plug with the PDU outlet. With a simple installation, the Smart-Lock Plug Connector will ensure that the power cord and PDU outlet never come apart without users’ assistance.

• Ensures power reliability by enhancing the plug's stability
• Intuitive and reusable design for easy installation and removal
• Environmentally safe – RoHS compliant and recyclable

Package Contents

• 10x C14 Smart-Lock Plug Connector
• 1x user instructions

EA1640 serves as a compact, flexible humidity and temperature measuring solution for ATEN PG series PDU applications where precision is significant – from server rooms, data centers, hospitals, smart factories to green offices. The sensor contains 1 x RJ-45 input port, 1 x RJ-45 output port, and 1x RJ-11 input port for easy connection with PG PDU series and environmental sensors including EA1140, EA1240, and EA1340. One terminal block is built for combining EA1440 / EA1441 / EA1442 door sensor or EA1540 the capacitive leakage sensor. Up to 8 daisy-chained devices are supported to broaden applications.

Designed with the ultimate flexibility in mind, EA1640 can be placed at an ideal location as a result of the 1.5 m RJ-45 cable coming with it. In addition, it comes with a magnet for easy attachment to metallic surfaces. Rack mount kits are also included for quick installation inside racks.

• A humidity and temperature measuring solution for ATEN PG PDU series
• Precise relative humidity accuracy: ±7.5 % RH, 30 – 70 % RH; ±15 % RH, 15 – 40 % RH, 70 – 90 % RH
• Highly accurate temperature measuring: ±1 °C (Max.), 10 – 40 °C; ±1.5 °C (Max.), –10 – 10 °C, 40 – 75 °C
• Supports up to 8 daisy-chained devices
• Multiple interfaces to broaden applications
  • 1 x RJ-45 input port, 1 x RJ-45 output port, and 1x RJ-11input port support connection with PG PDU series and EA1140 / EA1240 / EA1340 environmental sensors
  • 1 x terminal block supports EA1440 / EA1441 / EA1442 door sensor and EA1540 capacitive leakage sensor
• Meets flexible installation purposes
  • Included 1.5 m RJ-45 cable for ideal location placement
  • Contains a magnet for sticking to metallic surfaces
  • Included rack mount kits enable quick installation inside racks
  • Overload protection prevents overheating of the protected equipment
• LED indicator is visible through the enclosure
• Prevents device malfunctions thanks to early detection in case of overheating / excessive humidity
• Suitable for applications that require precise measuring, such as server rooms, data centers, hospitals, smartfactories, and green offices

Package Contents
1 x Temperature & Humidity Sensor
2 x Rack mount kits
1 x RJ45 Cable
1 x User Instructions

Electrical
Environment Sensor Ports	1 Port Terminal Block for Door Sensor (EA1440/EA1441/EA1442)/ Capacitive Leakage Sensor (EA1540) 1 Port RJ-11 for Original Temperature Sensor (EA1140/EA1240/EA1340)
Measurement
Range	Temperature: –10 to +75 °C Humidity: 0 to 100%
Accuracy	Temperature: ±1°C (max), 10 to 40 °C ±1.5°C (max), –10 to 10 °C, 40 to 75 °C Humidity: ±7.5% RH, 30–70% RH ±15% RH, 15–40% RH, 70–90% RH
Power Consumption	DC12V:0.273W:1BTU
Environmental
Humidity (Operating & Storage)	0 – 80% RH, Non-Condensing
Temperature (Operating / Storage)	–10 to 75 °C / -20 – 70?
Physical Properties
Dimensions (L x W x H)	10.44 x 3.57 x 2.14 cm (4.11 x 1.41 x 0.84 in.)
Weight	0.05 kg ( 0.11 lb )
Cable Length	1.5M(RJ45+RJ45) round cable
Housing	Black Polycarbonate
Compliance
EMC Verification	EMC/FCC, Class A
Safety Verification	By Request
LEDs
LED Indicator	[Solid]: EA1640 is in working mode [Fast Blinking (for 2 minutes)]: EA1640 receives the command “FindMe”. [Slow Blinking (for 10 seconds)]: Over-current protection (OCP) is triggered, and the sensor(s) connected to EA1640 is going to power off. [Slow Blinking]: Firmware upgrade of EA1640 is in progress.

Temperature SensorFor environmental monitoring and management, ATEN provides sensor probes that work in tandem with the Power Distribution Units, which enable you to get readings of temperate. Environmental conditions can be monitored with alarms according to customizable minimum/maximum thresholds set for temperature. * The Sensor is an optional accessory You can use the ATEN PDU without environmental sensors. However, if you want to have complete energy management of your data center with the full use of ATEN solutions, a sensor installation is requiredFeatures

• Measurement range: 0 - 40°C
• Measurement accuracy: +/- 1°C
• Compact design - built in 3 m cable
• High sensitivity
• Easy operation

Specifications

• Connectors: RJ-11 Male
• Supply Voltage: 5VDC (Max.)
• Current Consumption: 5mA max. (2 mA avg.)

Environment

• Operating Temp.: 0 - 55°C
• Storage Temp.: -20 - 70°C
• Humidity: < 95% RH
• Housing: Plastic
• Weight: 0,06 kg
• Cable Length: 3 meter

Package Contents

• 1x EA1140 Temperature sensor
• 1x Sensor mount
• 4x Tie wrap
• 3x Adhesive cable tie holder

Connectors	RJ-11 Male
Measurement
Range	0 - 40°C
Accuracy	+/- 1°C
Supply Voltage	5 VDC (Max)
Current Consumption	5mA(Max); 2mA(Avg.)
Environmental
Operating Temperature	0 - 55°C
Storage Temperature	-20 - 70°C
Humidity	< 95% RH
Physical Properties
Housing	Plastic
Weight	0.06 kg
Cable Length	3 m

For the security of your data center, ATEN provides Inductive Proximity Door sensor probes that work in tandem with the Power Distribution Units, which allows the monitoring of a rack mounted enclosure´s door access, notifying users when a door has been opened. Various conditions can be monitored with alarms according to customizable minimum/maximum settings.
* The Sensor is an optional accessory and you can use the ATEN PDU without the door sensors. However, if you want to have complete security management of your data center with the full use of ATEN solutions, a sensor installation is required.

** Support PE7/PE8/PE9 series only

• The Inductive Proximity Door Sensor allows the monitoring of a rack mounted enclosure’s door access  –  notifying users when a door has been opened
• High sensitivity
• Easy operation

Operating voltage	10 – 30 VDC
Ripple of power	20 % peak to peak
Current Consumption	10 mA (max.)
Sensing distance	5 mm
Hysteresis	10 % of sensing distance max
Response frequency	800 Hz (min.)
Output method	PNP
Output current	150 mA (max.)
Residual voltage	0,1 V (max.)
Leakage current	0,8 mA (max.)
Protection circuit	Short circuit & polarity reversed protection
Connection	3c/4.0
Dielectric strength	2,5 kV / 1 minute (min.)
Insulation strength	100 MΩ / 500 V VDC
Environmental
Operating Temperature	-20°C-80°C
Humidity	35 – 95 % RH
Protection class	IP-67

Package Contents

1x Inductive Proximity Door Sensor
2x Screw
1x Bracket
1x hook-and-loop

For the security of your data center, ATEN provides Reed Door sensor probes that work in tandem with the Power Distribution Units, which allows the monitoring of a rack mounted enclosure’s door access, notifying users when a door has been opened. Various conditions can be monitored with alarms according to customizable minimum/maximum settings.
* The Sensor is an optional accessory and you can use the ATEN PDU without the door sensors. However, if you want to have complete security management of your data center with the full use of ATEN solutions, a sensor installation is required.

** Support PE7/PE8/PE9 series only

• The Reed Door Sensor allows the monitoring of a rack mounted enclosure´s door access  –  notifying users when a door has been opened
• High sensitivity
• Easy operation

Switches
Switching voltage(Max)	70 V AC / DC
Switching current	50 mA
Contact capacity(Max)	1 Watt
Initial contact resistance	0,2 Ohm (max.)
Carry current (Max)	100 mA
Breakdown voltage	150 VDC
Insulation resistance	100 MOhm (min.)
Switch cycle	5 x 107´ at 12 V, 50 mA
Sense gap	16 mm (min.)
Environmental
Operating Temperature	-20°C–60 °C
Humidity	80 – 95 % RH

Package Contents

1x Switch
1x Magnet