InLine® 19" foldable rack, 24-40cm depth, with cover
- 19" rack for wall mounting
- 2U suitable for simple house installation, e.g. patch panel + network switch
- with cover (top/bottom) for half mounting depth
- compact design, easy to assemble
- Including set of 8x M6 cage nuts and set of 4x screws for wall mounting
- Delivery is folded, thus extremely space-saving
- Depth individually adjustable from 24-40cm
- Load capacity: 2U model approx. 10kg max., 4U approx. 12kg max.
InLine® 19" rack for under-table mounting
Discover our 19" rack for under-table mounting - the space-saving solution for professional IT and audio setups. Select the desired height unit from 1 to 4 U for optimum space utilisation to suit your application. The high-quality finish provides a stable hold for your equipment. Easy mounting under the table for a clean, tidy arrangement without wasting space. This rack is perfect for studios, server rooms and offices where efficiency and aesthetics are equally important. Give your technology a professional touch with our 19" under-desk rack - your reliable partner for an organised and effective working environment.
Content of delivery:
Content of delivery:
- 4x M6 screws with wall plugs and washers
- 4x 6x25mm wood screws
- M6 screw set, cage nuts, washers
InLine® 19" foldable rack, 24-40cm depth
- 19" rack for wall mounting
- 2U suitable for simple house installation, e.g. patch panel + network switch
- compact design, easy to assemble
- Including set of 8x M6 cage nuts and set of 4x screws for wall mounting
- Delivery is folded, thus extremely space-saving
- Depth individually adjustable from 24-40cm
- Load capacity: 2U model approx. 10kg max., 4U approx. 12kg max.
Triton RXA - 19" wall cabinet, demountable
RXA wall-mounted cabinet represents the conception of "flat pack", which means a demountable cabinet that is supplied disassembledFLAT-PACK-CONCEPTIONReduces cost of transportation and storage. Together with a unique construction, it contributes to the attractive price while keeping all functional characteristics. MOUNTINGThanks to the unique construction, the assembly procedure of RXA takes only few minutes and it does not almost require any tools (Torx T25). Plastic pins are used to join all the individual parts. DESCRIPTION, PURPOSE OF USE
- Demountable 19" wall mounted cabinet with IP30 protection, supplied disassembled
- Cabinet is to be hanged right on the wall.
- Cabinet includes two adjustable vertical rails
- Cabinet construction: Cabinet is made from parts joined by plastic pins / glass door: safety hardened glass, thickness 4 mm
- Max. permissible load of the door is 10 kg.
- Min. thickness of the surface finish is 65 micrometer
- Cabinets are intended for installation of data and telecommunication devices and their distribution systems
- All parts are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet.
- There is one M8 screw placed on the bottom part of the cabinet as an earthing main point
- Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet rear side, others are in the top and the bottom side of cabinet
- Office
- The cabinet is not intended for outdoor installations and for installations in environment that can influence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings)
- Mechanical damage
- Improper manipulation
- A different usage than the cabinet is intended for
- Overloading (maximum recommended load exceeding)
- Device installation that can influence negatively operation and function of the cabinet or the installed equipment
- Change of the construction or design of the cabinet
- It is necessary to assemble all single cabinet parts and to join them with delivered plastic pins. See the enclosed manual for the detailed assembly procedure
- This type of cabinet is to be hanged right on the wall using screws, wall plugs and washers. Spacing of mounting holes is indicated as "R" in the cabinet scheme
- To secure the maximum recommended load, it is necessary to fi x the cabinet on the wall with an appropriate carrying capacity (brick, concrete or similar) and to distribute the installed loading equally
- To avoid dust penetration in case that cables lead through some of the cable openings, you can seal it with the use of a blanking panel with a brush
- All parts are made of recyclable materials and after its discard, it is necessary to dispose the cabinet according to valid regulations
- Demountable 19" wall mounted cabinet, one-piece
- glass door
- Dimensions: Width 550mm, Depth 400mm
Triton 10" wall cabinet with glass door
The cabinet is often used for the realization of small projects such as home networks or small company networks (SOHO). Cabinet has a robust welded construction. High quality processing and the up-to-date technology ensure a perfect look of the cabinet. The cabinet door is glass standardly but it can be steel or perforated as required. The hinge system enables a comfortable accessTHE USE OF THE CABINETIdeal solution for installation of 10" components. The cabinet is often used in realizations of small projects such as home networks or small company networks (SOHO). It is a popular accessory of standard 19" cabinets.ADJUSTABLE VERTICAL RAILS10" rails are adjustable attached to the cabinet construction in predefined positionsBREAKOUT-TYPE BLANKING PANELSCable openings covered with breakout-type blanking panels are located in the top, bottom and rear part of the cabinet. DESCRIPTION, PURPOSE OF USE
- 10" wall-mounted cabinet with IP20 protection
- Cabinet is to be hanged right on the wall
- Cabinet includes two adjustable vertical rails.
- Cabinet construction: Compact welded cabinet / safety hardened glass door, thickness 4 mm. On demand may be metal or perforated
- Max. permissible load of the door is 10 kg
- Min. thickness of the surface finish is 65 micrometer
- Cabinets are intended for installation of data and telecommunication devices and their distribution systems
- The frame of the cabinet and all the removable parts are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet
- There is one M8 screw placed on the bottom part of the cabinet as an earthing main point
- Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet rear side, others are in the top and the bottom side of cabinet
- Office
- The cabinet is not intended for outdoor installations and for installations in environment that can influence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings)
- Mechanical damage
- Improper manipulation
- A different usage than the cabinet is intended for
- Overloading (maximum recommended load exceeding)
- Device installation that can influence negatively operation and function of the cabinet or the installed equipment
- Change of the construction or design of the cabinet
- This type of cabinet is to be hanged right on the wall using screws, wall plugs and washers (included in the supply). Spacing of mounting holes is showed and indicated as "R" in the cabinet scheme
- To secure the maximum recommended load, it is necessary to fix the cabinet on the wall with an appropriate carrying capacity (brick, concrete or similar) and to distribute the installed loading equally
- All parts are made of recyclable materials and after its discard, it is necessary to dispose the cabinet according to valid regulations
- Supply includes: 2x key - front door, 4x screw 6x50, 4x washer 6,6, 4x dowel 10, 8x captive nut M6
- Material: Safety hardened glass 5 mm thick, steel sheet
Triton RUA - Removable side panels,One-sectioned Wall-mounted cabinet
RUA wall-mounted cabinet is one of the one-sectioned wall-mounted cabinets. Thanks to removable side panels, installed devices are very easily accessible. Das Gehäuse verfügt über eine robuste Schweißkonstruktion. Die hohe Verarbeitungsqualität und neueste Technologien gewährleisten sein tolles Aussehen. Cabinet has a robust welded construction. High quality processing and the up-to-date technology ensure a perfect look of the cabinet and maximal loading capacity of 30 kg. Cabinet door is glass standardly but it can be steel or perforated as required. The hinge system enables almost 180° wide opening of the door. Doors can be easily removed. REMOVABLE SIDE PANELS: Removable side plates enable access to the installed devices from the rear side without demounting. Blanking panels for installation of cooling ventilators: RUA has now in its all versions six break-out blanking panels for installation of cooling ventilators RAX-CH-X07-X9 (three are in the upper and three in the lower part of a cabinet). RUA cabinet enables installation of devices that could not be cooled sufficiently in wall-mounted cabinets in the past and therefore had to be installed into free-standing cabinets only. ADJUSTABLE VERTICAL RAILS: One pair of vertical 19" rails is freely adjustable in any depth of the cabinet. This simplifies mounting of the device and organisation of connecting cables. BREAKOUT-TYPE BLANKING PANELS: Cable openings covered with breakout-type blanking panels are ready in the top, bottom and rear part of the cabinet. Use a plastic frame and a blanking panel with a brush, that are parts of the cabinet supply, to seal the cabinet opening against dust penetration.DESCRIPTION, PURPOSE OF USE
- 19" one-sectioned wall-mounted cabinet with IP30 protection
- Removable side panels secured by locks
- Cabinet is to be hanged right on the wall
- Cabinet includes two sliding vertical rails
- Cabinet construction: Welded frame with removable side panels secured by locks Safety hardened glass door, thickness 4 mm. On demand may be metal or perforated
- Max. permissible load of the door is 10 kg
- Min. thickness of the surface fi nish is 65 micrometer
- Cabinets are intended for installation of data and telecommunication devices and their distribution systems
- The frame of the cabinet and all the removable parts are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet
- There is one M8 screw placed on the bottom part of the cabinet as an earthing main point
- Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet rear side, others are in the top and the bottom side of cabinet
- There are several openings in the top and bottom part of the cabinet which allow to install ventilation units and which are covered with break-out blanking panels
- Office
- The cabinet is not intended for outdoor installations and for installations in environment that can influence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings)
- Mechanical damage
- Improper manipulation
- A different usage than the cabinet is intended for
- Overloading (maximum recommended load exceeding)
- Device installation that can influence negatively operation and function of the cabinet or the installed equipment
- Change of the construction or design of the cabinet
- This type of cabinet is to be hanged right on the wall using screws, wall plugs and washers (included in the supply). Spacing of mounting holes is showed and indicated as "R" in the cabinet scheme
- To secure the maximum recommended load, it is necessary to fix the cabinet on the wall with an appropriate carrying capacity (brick, concrete or similar) and to distribute the installed loading equally
- To avoid dust penetration in a case where cables lead through some of the cable openings, you can seal it using a blanking panel with a brush or secure by plastic frame (both are part of the cabinet supply)
- All parts are made of recyclable materials and after its discard, it is necessary to dispose the cabinet according to valid regulations
- Supply includes: 2x key - front door, 4x screw 6x50, 4x washer 6,6, 4x dowel 10, 8x captive nut M6, 1x blanking panel with brush, 8x screw M6x10, 8x plastic washer, 1x plastic frame 300x700mm
- Material: Safety hardened glass 5 mm thick, steel sheet
- Dimension (HxWxD in mm): 635 x 600 x 595
- Door size (HxW in mm): 530 x 530
- Net weight: 26,0 kg / Gross weight: 26,3 kg
Triton RBA - One-sectioned Wall-mounted cabinet, IP20, load from 60kg,
The fully welded wall-mounted cabinet is a classic for medium size installations. It is well-proven by thousands of successful installations. Cabinet has a robust welded construction. The cabinet door is glass standardly but it can be steel or perforated as required. The hinge system enables almost 180° wide opening of the door. Doors can be easily removed.
ADJUSTABLE VERTICAL RAILS
One pair of vertical 19" rails is freely adjustable in any depth of the cabinet. This simplifies mounting of the device and organisation of connecting cables.
BREAKOUT-TYPE BLANKING PANELS
Cable openings covered with breakout-type blanking panels are ready in the top, bottom and rear part of the cabinet. Use a plastic frame and a blanking panel with a brush, that are parts of the cabinet supply, to seal the cabinet opening against dust penetration.
DESCRIPTION, PURPOSE OF USE
OPERATION CONDITIONS
Operation environment:
Must be protected against:
Improper manipulation is especially:
INSTALLATION OF THE CABINET
ENVIRONMENT PROTECTION
ADJUSTABLE VERTICAL RAILS
One pair of vertical 19" rails is freely adjustable in any depth of the cabinet. This simplifies mounting of the device and organisation of connecting cables.
BREAKOUT-TYPE BLANKING PANELS
Cable openings covered with breakout-type blanking panels are ready in the top, bottom and rear part of the cabinet. Use a plastic frame and a blanking panel with a brush, that are parts of the cabinet supply, to seal the cabinet opening against dust penetration.
DESCRIPTION, PURPOSE OF USE
- 19" one-sectioned wall-mounted cabinet with IP20 protection
- Cabinet is to be hanged right on the wall
- Cabinet includes two sliding vertical rails.
- Cabinet construction: Compact welded cabinet / safety hardened glass door, thickness 4 mm. On demand may be metal or perforated
- Max. permissible load of the door is 10 kg
- Min. thickness of the surface finish is 65 micrometer
- Cabinets are intended for installation of data and telecommunication devices and their distribution systems
- The frame of the cabinet and all the removable parts are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet
- There is one M8 screw placed on the bottom part of the cabinet as an earthing main point
- Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet rear side, others are in the top and the bottom side of cabinet
OPERATION CONDITIONS
Operation environment:
- Office
- The cabinet is not intended for outdoor installations and for installations in environment that can infl uence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings)
Must be protected against:
- Mechanical damage
- Improper manipulation
- A different usage than the cabinet is intended for
Improper manipulation is especially:
- Overloading (maximum recommended load exceeding)
- Device installation that can influence negatively operation and function of the cabinet or the installed equipment
- Change of the construction or design of the cabinet
INSTALLATION OF THE CABINET
- This type of cabinet is to be hanged right on the wall using screws, wall plugs and washers (included in the supply). Spacing of mounting holes is showed and indicated as "R" in the cabinet scheme
- To secure the maximum recommended load, it is necessary to fi x the cabinet on the wall with an appropriate carrying capacity (brick, concrete or similar) and to distribute the installed loading equally
- To avoid dust penetration in a case where cables lead through some of the cable openings, you can seal it using a blanking panel with a brush or secure by plastic frame (both are part of the cabinet supply).
ENVIRONMENT PROTECTION
- All parts are made of recyclable materials and after its discard, it is necessary to dispose the cabinet according to valid regulations
- Supply includes: 2x key - front door, 4x screw 6x50, 4x washer 6,6, 4x dowel 10, 8x captive nut M6, 1x blanking panel with brush
- Material: Safety hardened glass 5 mm thick, steel sheet
- Dimensions (HxWxD in mm): 280 x 600 x 395
- Door size (HxW in mm): 175 x 490
- Weight: 12.4 kg net / 12.7 kg gross
Triton RBA - Two-sectioned Wall-mounted cabinet, IP20, capacity 20-30kg
The data and telecommunication cabinet is a very successful version of two-sectioned cabinets. Opening parts of the cabinet enable an easy access to the rear cabinet section. Cabinet has a robust welded construction. Cabinet door is glass standardly but it can be steel or perforated as required. The hinge system enables almost 180° wide opening of the door. The door can be easily removed and mounted for a change of the door opening direction.
EASY ACCESS
Opening parts of the cabinet enable an easy access to the rear cabinet section. You can easily remove the front part of the cabinet after unlocking chain shackles. All parts are interconnected and earthed
ADJUSTABLE VERTICAL RAILS
One pair of vertical 19" rails is freely adjustable in any depth of the cabinet. This simplifies mounting of the device and organisation of connecting cables
BREAKOUT-TYPE BLANKING PANELS
Cable openings covered with breakout-type blanking panels are ready in the top, bottom and rear part of the cabinet. Use a plastic frame and a blanking panel with a brush, that are parts of the cabinet supply, to seal the cabinet opening against dust penetration
DESCRIPTION, PURPOSE OF USE
OPERATION CONDITIONS
Operation environment:
Must be protected against:
Improper manipulation is especially:
INSTALLATION OF THE CABINET
ENVIRONMENT PROTECTION
EASY ACCESS
Opening parts of the cabinet enable an easy access to the rear cabinet section. You can easily remove the front part of the cabinet after unlocking chain shackles. All parts are interconnected and earthed
ADJUSTABLE VERTICAL RAILS
One pair of vertical 19" rails is freely adjustable in any depth of the cabinet. This simplifies mounting of the device and organisation of connecting cables
BREAKOUT-TYPE BLANKING PANELS
Cable openings covered with breakout-type blanking panels are ready in the top, bottom and rear part of the cabinet. Use a plastic frame and a blanking panel with a brush, that are parts of the cabinet supply, to seal the cabinet opening against dust penetration
DESCRIPTION, PURPOSE OF USE
- 19" two-sectioned wall-mounted cabinet with IP20 protection
- Cabinet is to be hanged right on the wall
- Cabinet includes two sliding vertical rails
- Cabinet construction: Compact welded cabinet / safety hardened glass door, thickness 4 mm. On demand may be metal or perforated
- Max. permissible load of the door is 10 kg
- Min. thickness of the surface finish is 65 micrometer
- Cabinets are intended for installation of data and telecommunication devices and their distribution systems
- The frame of the cabinet and all the removable parts are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet
- There is one M8 screw placed on the bottom part of the cabinet as an earthing main point
- Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet rear side, others are in the top and the bottom side of cabinet
OPERATION CONDITIONS
Operation environment:
- Office
- The cabinet is not intended for outdoor installations and for installations in environment that can influence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings)
Must be protected against:
- Mechanical damage
- Improper manipulation
- A different usage than the cabinet is intended for
Improper manipulation is especially:
- Overloading (maximum recommended load exceeding)
- Device installation that can influence negatively operation and function of the cabinet or the installed equipment
- Change of the construction or design of the cabinet
INSTALLATION OF THE CABINET
- This type of cabinet is to be hanged right on the wall using screws, wall plugs and washers (included in the supply). Spacing of mounting holes is showed and indicated as "R" in the cabinet scheme
- To secure the maximum recommended load, it is necessary to fix the cabinet on the wall with an appropriate carrying capacity (brick, concrete or similar) and to distribute the installed loading equally
- To avoid dust penetration in a case where cables lead through some of the cable openings, you can seal it using a blanking panel with a brush or secure by plastic frame (both are part of the cabinet supply).
- Both cabinet sections are joined with a lock accessible from the side of the cabinet
ENVIRONMENT PROTECTION
- All parts are made of recyclable materials and after its discard, it is necessary to dispose the cabinet according to valid regulations
- Supply includes: 2x key - front door, 4x screw 6x50, 4x washer 6,6, 4x dowel 10, 8x captive nut M6, 1x blanking panel with brush
- Material: Safety hardened glass 5 mm thick, steel sheet
- Net weight: 11.6 kg / Gross weight: 11.9 kg
Triton RKA 10"/19" Wall Cabinet Hybrid, with glass door
The RKA type combines a possibility to install both 10“ or 19“ equipment. A conversion from one standard to another is possible without replacement of a cabinet and cables.DESCRIPTION, PURPOSE OF USE
- 10"/19" wall mounted cabinet with IP30 protection
- Cabinet is to be hanged right on the wall
- Cabinet includes adjustable frame for device installation
- Cabinet construction: Compact welded cabinet / safety hardened glass door, thickness 4 mm. On demand may be metal or perforated
- Max. permissible load of the door is 10 kg
- Min. thickness of the surface finish is 65 micrometer
- Cabinets are intended for installation of data and telecommunication devices and their distribution systems
- All parts are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet
- There is one M8 screw placed at the side wall of the cabinet as an earthing main point
- Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet rear side, others are in the top and the bottom side of cabinet
- Office
- The cabinet is not intended for outdoor installations and for installations in environment that can influence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings)
- Mechanical damage
- Improper manipulation
- A different usage than the cabinet is intended for
- Overloading (maximum recommended load exceeding)
- Device installation that can influence negatively operation and function of the cabinet or the installed equipment
- This type of cabinet is to be hanged right on the wall using screws, wall plugs and washers. Spacing of mounting holes is indicated as „R“ in the cabinet scheme
- To secure the maximum recommended load, it is necessary to fix the cabinet on the wall with an appropriate carrying capacity (brick, concrete or similar) and to distribute the installed loading equally
- All parts are made of recyclable materials and after its discard, it is necessary to dispose the cabinet according to valid regulations
- Supply includes: 2x key - front door, 4x screw 6x50mm, 4x washer 6,6mm, 4x dowel 10mm, 8x captive nut M6
Triton RFA - 3 sections, IP20, capacity 50kg
RFA-wall cabinet
- one-piece 19" wall-cabinet with protection class IP20
- three separate 19"-sections
- 1st section: The first section allows the installation of 19" components with a max. height of 6U and a depth of 450 mm. They are installed vertically, the 19" rails in the cabinet are depth adjustable. Cable entries with breakout panels are located in the rear wall, the roof and the bottom.
- 2nd Section: In the second section a mounting width of 19", a height of 12U and a depth of 450mm are available. The mounting rails are fully adjustable. Here are usually structured cabling as well as the active elements of the company´s network concentrated and the individual services are allocated to the recommended up to 48 jobs (each with 2 ports as per standard).
- 3rd section: The third section includes the entire surface of the bottom of the housing. Here is space for components with a maximum depth of 800 mm, a width of 19" and a height of 2 to 7U, depending on the housing type. Access to this section is through the door on the right side. Besides the cabinet has to be enough distance for the extraction of components.
- The cabinet is mounted directly to the wall
- Part of the cabinet are two sliding adjustable positions respectively vertical mounting rails in each section
- Cabinet construction: welded frame, door combination for different sections: 4mm thick tempered glass (also full sheet metal or perforated door is possible) and perforated door
- The maximum permissible load of the individual doors is 10 kg
- The cabinets are intended for installation of data and telecommunication devices and their distribution systems
- The frame of the cabinet and all the removable parts are connected with earthing cables that have to be properly fixed and inserted during the lifetime of the cabinet
- In the bottom of the cabinet there is a M8 screw as the main earthing point
- Cable openings covered with breakout panels are at the top and bottom of the rear wall, and in the top and bottom and the central partition wall between the sections
- In the first section of the door there are openings (you can break out) for the installation of fans
- maximum height of the server: 3U
- OPERATING CONDITIONS
- Offices
- The cabinet is not intended for outdoor use or under conditions that may have a negative influence on its function and the installed components (e.g. environment with danger of explosion or humid and wet rooms)
- It is to protect against:
- - mechanical damage
- other than the intended use for the cabinet
- a false treatment means in particular:
- - Overloading (exceeding the recommended maximum load)
- - Installation of equipment that may affect the operation and functioning of the cabinet or the installed components negatively
- - Intervention in the cabinet construction and its design
Triton RBA-04-CS3-CAX-C1 10" wall cabinet 4U, with solid metal door, grey
This housing is often used in the implementation of small projects, such as home networks or networks of small companies (SOHO). The housing features a robust welded construction. The high quality of workmanship and the latest technologies ensure its great appearance. The wall distributor has a full glass door as standard. On request, however, a solid sheet metal or perforated door can also be supplied. The hinge system allows the door to be opened almost 180°. The doors can be easily removed and the door hinges changed.USE OF THE DISTRIBUTORIdeal solution for the installation of 10" components. The housing is often used in the implementation of small projects, such as home networks or small business networks (SOHO). It is a popular addition to the classic 19" racks.ADJUSTABLE VERTICAL RAILSThe 10" rails are attached to the chassis frame in predefined positions and can be adjusted accordingly br>BREAK-OUT PANELSThere are cable entries in the top, bottom and rear of the housing which are fitted with break-out panels.DESCRIPTION, PURPOSE
- 10 "-Wall distributor with IP20 degree of protection
- The housing is attached directly to the wall
- Part of the distributor are two adjustable vertical grid rails
- Distributor construction: compact welded construction / full sheet metal front door< /li>
- The permissible load capacity of the individual doors is max. 10 kg
- The minimum application thickness is 65 microns
- The enclosures are intended for the installation of data and telecommunications equipment and their distribution systems
- The distribution frame, as well as all removable parts, are connected with earthing cables, which can be used during the entire service life of the housing must be properly fastened and plugged in
- In the bottom of the distributor there is an M8 screw as the main grounding point
- Cable entries with break-out covers are located at the top and bottom of the rear wall of the housing as well as respectively another in the roof and floor
- Offices
- The distributor is not intended for outdoor use or under conditions that may have a negative impact on its function and that of the installed components (e.g. environments with a risk of explosion or damp and wet rooms)
- mechanical damage
- improper handling
- another than the intended use of the distributor
- Overloading (exceeding the maximum recommended load)
- Installation of equipment that can adversely affect the operation and functioning of the distributor or installed components
- Interventions in the construction and design of the distributor
- The housing is attached to the wall with screws, dowels and washers (included). The hole spacing for the suspension is marked with the value "R" in the distribution diagram
- In order to ensure the recommended maximum load, the housing must be attached to a wall with the appropriate load-bearing capacity (brick, concrete wall or similar). and the installed load to be evenly distributed
- All parts are made of recyclable materials. They must be disposed of in accordance with the applicable regulations after the distributor has been taken out of service , 4x dowel 10, 8x cage nut M6
- Material: deep-drawn steel sheet
- External dimensions (HxWxD in mm): 248 x 310 x 260
- Door dimensions (HxW in mm) : 169 x 255
- Weight: Net 5.4 kg / Gross: 5.5 kg
