InLine® Gigabit network switch 5-port, 1Gb/s, desktop, metal housing, fanless
The switch has pre-punched holes on the underside so that it can be hung on the wall
Specification:Standards and protocols: IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T CSMA/CD, TCP/IPBasic functions:
Specification:Standards and protocols: IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T CSMA/CD, TCP/IPBasic functions:
- 5x 10/100/1000 Mbps Auto-Negotiation ports
- MAC Address Auto-Learning and Auto-Updating
- IEEE802.3x flow control for Full Duplex mode and Backpressure for Half Duplex mode
- 1000Base-T: 1488000pps/port
- 10Base-T: UTP cable Cat. 3, 4, 5 (max. 100 meter), EIA/TIA-568 100Ohm STP (max. 100 meter)
- 100Base-TX: UTP cable Cat. 5, 5e or higher (max. 100 meter)
- 1000Base-T: UTP Kabel Cat. 5, 5e or higher (max. 100 meter)
- EIA/TIA-568 100ohm STP (max. 100 meter)
- Operating temperature: 0°C ~ 60°C
- Storage temperature: -10°C ~ 70°C
- Humidity in operation: 10% ~ 90% non-condensing
- Storage humidity 5% ~ 90% non-condensing
InLine® Network Switch 8-Port, 1Gb/s, Desktop, Metal, fanless, shielded ports
The switch has pre-punched holes on the underside so that it can be hung on the wall
Specification:Standards and protocols: IEEE802.3 10Base-T, IEEE802.3u 100Base-TX CSMA/CD, TCP/IPGrundfunktionen:
Specification:Standards and protocols: IEEE802.3 10Base-T, IEEE802.3u 100Base-TX CSMA/CD, TCP/IPGrundfunktionen:
- 8x 10/100/1000 Mb/s Auto-Negotiation ports
- MAC Address Auto-Learning and Auto-updating
- IEEE802.3x flow control for Full-Duplex mode and 802.3z asymmetric flow control
- 10Base-T: 14880pps/port
- 100Base-TX: 148800pps/port
- 10Base-T: UTP cable Cat. 3, 4, 5 (max. 100 meters), EIA/TIA-568 100ohm STP (max. 100 meters)
- 100Base-TX: UTP Cable Cat. 5, 5e or higher (max. 100 meters)
- EIA/TIA-568 100ohm STP (max. 100 meters)
- Operating temperature: 0°C ~ 40°C (32°F ~ 104°F)
- Storage temperature: -40°C ~ 70°C (-40°F ~ 158°F)
- Operating humidity: 10% ~ 90% non-condensing
- Storage humidity: 5% ~ 90% non-condensing
InLine® SFP module fibre optic with LC sockets, 1.25Gb/s
A small form-factor pluggable (SFP) Gigabit 1000BASE-LX transceiver that provides a full-duplex Gigabit solution 10 kilometers distance with 1.25Gb/s transmission rate. Suitable for Article 32324P InLine® PoE+ Gigabit Network Switch 24 Port.
- Duplex LC port
- Singlemode 1310nm (SFP)
- 1.25Gbps
Offer
Longshine Gigabit Switch, metal
The switch is an all-rounder, whether in small home networks or in office environments, it connects all network structures of 10Mbit/s, 100Mbit/s and 1000Mbit/s. With its throughput of up to 1000Mbit/s and the built-in store and forward technology, it offers fast data throughput with filtering of the faulty data packets for the entire network. Due to its small dimensions, it can also be easily positioned in small environments.
- Connections: 5 ports with 10/100/1000Mbit/s each
- Supports full and half duplex operations on all ports
- Supports Auto MDI-/MDI-X
- Supports back-pressure (half duplex) and flow control (IEEE 802.3x)
- Store-and-forward architecture filters fragments and CRC error packets
- Supports Jumbo Frame 9K
- Small desktop metal housing
- LED indicators for network diagnostics
- EEE Energy Efficient Ethernet IEEE802.3az
- Loop detection
- Without fan
- Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az, IEEE 802.3p
- Operating temperature: 0°C~40°C, Humidity: 10%~90% (non-condensing)
- Dimensions: 121mm x 75mm x 26mm (LxWxH)
- External power supply 5V, 1A
- Package contents: Switch, manual, power supply unit
InLine® USB-C switch, bidirectional switch, 10Gb/s, 100W
This bidirectional USB-C switch from InLine is a manual 2x1 or 1x2 switch for connecting different USB-C devices and is used for power, data and image transfer. The switch can be used flexibly, e.g. one monitor can be connected to two computers or two hard disks to one computer. The connection to the monitor or the hard disk can then be changed at the touch of a button. The bidirectional application option allows you to use this product flexibly. Image transmission up to 4K@60Hz (USB-C, max. 1m), power transmission up to 100 watts (max. 2m), Data transmission up to 10 Gb/s (max. 20cm), 5 Gb/s (up to 1m). Use the switch, for example, to connect a monitor to two computers or two hard disks to one computer.
- Connections: 1x 0.5m USB-C plug, 2x USB-C socket, 1x USB-C socket (DC/5V)
- Add. Power source: USB-C socket / USB-C to USB-A cable included
- Data: USB 3.2 Gen.2 (10Gb/s)
- Power: 100W
- Audio: Yes
- Connections: 3
- Interface: USB-C
- Integrated cable: USB-C plug, 50cm
- PC Video Type: USB-C (DP Alt Mode)
- Number of monitors supported: 1
- Daisy Chain: No
- LED displays: 2
- Housing: aluminum
- Color: Gray
- Dimensions (wxhxl): 15 x 57.5 x 66.5 mm
- Weight: of the product: 70.2g
- 1x USB-C switch
- 1x USB-C plug to USB-A plug cable 1m
- 2x USB-C plug/plug cable 1m
- 1x user manual
InLine® PoE+ Gigabit Network Switch 24 port,1 Gb/s, 2xSFP,19"1U (incl. brackets)
The InLine® PoE+ Gigabit Network Switch is a fast and flexible solution for upgrading the existing network to the IEEE 802.3af / IEEE 802.3at Power over Ethernet system as well as a fiber-optic connection to bridge longer distances. The switch provides protection against, for example, overload, overvoltage and overheating at each port. In addition, the switch offers both IEEE 802.3af and IEEE 802.3at PoE+ with up to 32 watts of power per port via single Cat. 5/5e/6 Ethernet cable with a PoE budget of 380W and a combined total power of 420 watts. 24x 10/100/1000Mbps PoE+ ports solve the problem of a limited number of available power outlets, providing system administrators with a flexible solution to power almost anywhere the powering network device, such as PoE-enabled IP cameras or wireless access points.The LC display not only shows the operating state of the PoE port, but also the state of each port, such as e.g.: Output power, overload, short circuit, low workload, undervoltage, overvoltage, overheating, etc. These includes, for example:
- Switch mode (Normal, VLAN (the switch supports the isolation of each port, but each port can still communicate with the uplink port), CCTV (the switch supports a maximum distance of 250 meters with a transmission speed of 10Mbps.
- Switch bandwidth
- PD type (PD=powered devices): Enhance: PD supports no PoE according to IEEE802.3at/af, Standard: PD supports PoE according to IEEE802.3at/af, Legacy: Using a Cisco-PD with ist own PoE standard
- PD Reboot by deactivating/activating the corresponding port
- PSE power fine (PSE=power supply equipment): This feature can increase the overall performance of the PoE budget
- PSE port priority: Here you can set the PoE prioritization per port between high, medium and low
- PSE port enable: Through this every individual port can be activated / deactivatedPSE port power: With this function, the PoE power can be selected in steps of 2W between 8W-32W
- Fan control: This function gives you the option of specifying fan operation. You can choose from "Always On", "20% PB" (when the switch spends 20% of its power budget), and "40% PB".
- Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T,IEEE 802.3z 1000BASE-X Gbit/s Ethernet over Fiber-Optic, IEEE 802.3x Full Duplex and flow control, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus
- Ports: 24x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X, 2x 1000Mb/s SFP
- PoE ports: 1-24
- PoE budget: 380W
- Total output: 420W
- LCD display: Real-time display of PoE operating status
- PoE output power: Max. 32 watts per port
- LED indicators: PWR, LNK/ACT PoE
- Network cable: 10BASE-T: UTP Category 3, 4, 5 cable (100m)
- 100BASE-TX: UTP Category 5, 5e cable 100m)
- 1000BASE-T: UTP Category 5, 5e cable (100m)
- 1000BASE-SX: MMF, SMF
- MAC address table: 8K, automatic learning, automatic updates
- Jumbo Frame: 9216 Bytes
- Packet buffer: 4.1Mbit
- Transmission method: Store-and-forward
- Packet forwarding rate: 38.69Mpps
- Bandwidth: 52G
- Number of fans: 3
- Dimensions (W x D x H): 440x232x45mm
- Weight: appr. 3.7kg
- Mains input: 100~240V AC, 50/60Hz
- Environmental conditions: Operating temperature -10-60°C, storage temperature -40-70°C, humidity in operation 10-90% non condensing, humidity during storage 5-90% non condensing
- Surge protection: ± 6KV
- 1x InLine® PoE+ Gigabit Network Switch
- 1x user manual (German/English)
- 1x power cable
- 2x 19" mounting brackets
- 8x screws for the mounting brackets
- 4x rubber feet
InLine® SFP+ module fibre optic 850nm multimode with LC sockets, 300m, 10Gb/s
Small Form-Factor Pluggable (SFP+) 10 Gigabit transceiver for a transmission rate of 10 Gb/s over distances of up to 300 metres
- Compliant with SFP MSA and SFF-8431
- Optical interface compliant to IEEE 802.3aeLane bit rate: 10.3 Gb/s
- 850nm VCSEL laser and PIN photo-detector
- I2C interface with integrated Digital Diagnostic monitoring
- Single +3.3V power supply
- Hot Pluggable
- DDM: Digital Diagnostic Monitoring Interface
- Transmission Distance: 300m @ OM3 MMF
- Optical Interface: LC Duplex
- Center Wavelength: 840nm ~ 860nm
- Average Optical Power: -6.5dBm ~ -1dBm
- Pin Definitions: 1-10 toward BEZEL, 11-20 toward ASIC
- Generic coding
- Electrical interface compliant to SFF-8431
- Operating case temperature: 0°C ~ 70°C
- Storage temperature: -40°C ~ 85°C
InLine® Gigabit Network Switch 24-Port, 1Gb/s, 48,26cm (19"), 1U, metal, fanless
The InLine® 24-Port Green Gigabit Switch offers a seamless network connection. The 24x 10/100/1000Mb/s auto-negotiation ports support all Auto MDI/MDIX. The switch is a cost-effective, easy-to-use, and powerful solution to upgrade your legacy network to a Gigabit network.The switch supports IEEE802.3az Energy Efficient Ethernet (EEE), which reduces power consumption by detects the connected cable length and operating mode and automatically adjusts the signal intensity, which reduces energy consumption and protects our environment.Features
- Meets the standards IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x and IEEE802.3az
- EEE (Energy Efficient Ethernet): Reduced power consumption thanks to intelligent energy management
- Supports up to 16K MAC addresses
- Supports IEEE802.3x Flow control for full-duplex mode and back-pressure for half-duplex mode
- Supports jumbo frames
- LED indicators for monitoring power supply and link/activity< /ul>Technical data
- Chipset: RTL8382L+ 2x RTL8218D + 2x RTL8231
- Stan standards: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3az
- 10Base-T: UTP cable Cat. 3, 4, 5 (max. 100m)
- EIA/TIA-568 100Ohm STP (max. 100m)
- 100Base-TX: UTP cable Cat. 5, 5e or higher (max. 100m)
- EIA/TIA-568 100Ohm STP (max. 100m)
- 1000Base-T: UTP cable Cat. 5e or higher (max. 100m)
- Number of ports: 24x 10/100/1000Mb/s auto-negotiation ports
- LED indicators: LINK/ ACT/SPEED (green), Power (red)
- Transmission method: Store-and-forward
- Switching capacity: 52Gb
- 10Mb/s: 14880pps
- 100Mb/s: 148800pps
- 1000Mb/s: 1488000pps
- Operating temperature: 0°C - 40°C
- Storage temperature: -10° C - 70°C
- Operating humidity: 10% - 90%, non-condensing
- Storage humidity: 5% - 90%, non-condensing
- Power supply: AC 100V~240V 50/60Hz (internal power supply) / power consumption: Max. 21 Watt
- incl. 19" bracket for rack mounting
InLine® PoE+ Gigabit Network Switch 5 Port (4x PoE+), 1xSFP, 1Gb/s, desktop
The InLine® Gigabit Network Switch 5 Port (4x PoE+), 1xSFP, offers a fast network connection as well as PoE+ support on 4 of the 5 ports. The SFP port supports SFP modules with a bandwidth of 1.25 Gb/s. The 5x 10/100/1000Mb/s auto-negotiation RJ45 ports all support Auto MDI/MDIX.
The switch is an easy-to-use and powerful solution to upgrade your old network to a Gigabit network and to power PoE-enabled devices such as IP cameras, IP phones, access points, etc. via the connected patch cable.
- Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-X, IEEE 802.3x Flow control, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus
- Ports: 4x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X, PoE+ support 1x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X 1x 1000Base-X SFP port
- Three modes: Normal operation, VLAN port isolation (ports 1-4), range extension up to 250 metres via patch cable at 10 Mb/s (ports 3 and 4)
- PoE Type of power supply: Endspan
- PoE output voltage: Per port 52V DC
- PoE output power: Per port max. 30 watts
- Total power: 65 watts
- LED indicators: Power, mode, port (1-6)
- Dimensions (W x D x H): 20.2 x 12 x 4.5 cm
- Weight: approx. 616 g
- Power consumption: 100-240V AC, 50/60 Hz
- Ambient conditions: Operating temperature 0-40°C, storage temperature -20-70°C, humidity 20-95% non-condensing
Content of delivery:
- 1x InLine® PoE+ Gigabit Network switch
- 1x manual (German/English)
- 1x power cable
- 4x rubber feet
Offer
Longshine Gigabit Switch, Web Smart SNMP, fanless
The new LCS-GS8416 switch provides an ideal basis for small and medium-sized workgroups with high network and data volumes and enables fast data transmission in the network. With a total of 16 backwards-compatible Gigabit ports, the connected computers and servers are reliably and powerfully interconnected. Thanks to its fanless design, the LCS-GS8416 is also ideal for use in office environments as it does not generate any disruptive noise. The switch is smart manageable and therefore supports all necessary standards such as QoS, VLAN, storm control or IGMP snooping. This ensures maximum performance and security in your network. The robust metal housing is suitable for installation in a 19’ rack (via optionally available brackets) as well as for wall mounting.
- 16-port Gigabit ‘non-blocking’ switch architecture
- supports NWay protocol and duplex mode (half/full) auto-detection
- supports back-pressure, flow control (IEEE 802.3x and IEEE 802.3az Energy Efficient Ethernet)
- VLAN ‘64 Static / Port-Based / Tagged Based
- Link aggregation (IEEE802.3ad LACP & Static Trunk)
- IGMP Snooping (v1/v2/v3)
- QoS (Port Based, Flow, 802.1p, IP-TOS, IP DSCP)
- Stormcontrol (Broadcast, Multicast, Unicast)
- Fanless
- Desktop device for wall/table mounting, mounting on 10‘ or 19’ is possible with optional brackets
- Switch mode of operation: Layer 2 switch, smart, store and forward, auto-negotiation
- Switch type: Stand alone
- Switching ports: 16x RJ45 10/100/1000BaseT(X)
- Uplink: Possible on all ports (Auto MDI/MDI-X)
- Cascadable: Uplink
- Full duplex mode: Yes
- Data throughput: Line speed
- Buffer memory: 524.8K bytes
- Jumbo frame: 10K bytes
- Switch Fabric: 32Gbps
- Address management: Self-learning
- MAC address table: 8000
- Filtering/Forwarding: Line speed
- LED indicators: Power; Link, Activity
- Power supply: 100 - 240V AC, internal power supply unit
- Power consumption: 15 watts maximum
- Supported standards: IEEE802.3 10BaseT; IEEE802.3u 100BaseTX, IEEE802.ab 1000BaseT; IEEE802.3ad Link Aggregation, IEEE802.1ab Link Discovery Protocol (LLDP), IEEE802.3x full-duplex operation and flow control, IEEE 802. 3az Energy Efficient Ethernet IEEE 802.1p class of service, priority protocols, IEEE802.1Q VLAN Tagged Based; IEEE802.1d Spanning Tree (STP), IEEE802.1w Spanning Tree (RSTP)
- Layer2 functions: Flow Control (Full-Duplex & Half-Duplex), Spanning Tree (IEEE802.1d STP & IEEE802.1w RSTP, Auto Edge Port, Self Loop Detection), VLAN (64 Static VLAN, Port-based, IEEE802.1q Tagged-based), Voice VLAN (OUI Mode), Link Aggregation (IEEE802. 3ad LACP, Static Trunk, 8x max groups, 8 ports/groups, Traffic Load Balancing), IGMP Snooping (256 multicast groups, IGMP v1/v2/v3, IEEE802.1ab Link Layer Discovery Protocol (LLDP)
- QoS features: o 8 Priority Queue, Rate Limit (Port Based Ingress/Egress), Queue Scheduling (WRR, WFQ, Strict Priority, Hybrid), Class of Service (Port-based, Flow-based, 802.1p, IP Tos, IP DSCP)
- Security: o Storm Control (Broadcast, Unknown Multicast, Unknown Unicast), HTTPS and SSL 2.0, Account Manager (Multiple Account, Multi-Level Security), Management VLAN, Port Isolation, DoS Prevention
- IPv6: IPv6 Application (HTTP/HTTPS, TELNET, SNMP, TFTP, PING, PHCPv6), IPv6 Host (Static Address Length, Default Gateway, Neighbour Discovery (ND), Duplicate Address Detection, ICMPv6)
- Management: Web GUI (HTTP, HTTPS), Command Line Interface CLI (Console, RFC854), SNMP (v1/v2), File Management (Firmware Upgrade, Configuration Download, DHCP Client, DNS Client, Mirroring (Port-based (many to one), Syslog (RFC3164, LocalRAM, Local Flash, Remote Server), Time Setting (Local, SNTP), Cable Diagnostics (Cable Test), Port Utilisation, Reset Button, EEE (802.3az)
- Housing: 19’ metal housing
- Environment: Operating temperature: 0 ~ 55 °C, Operating humidity: 10% ~ 90%, Storage temperature: -20 ~ 90 °C, Storage humidity: 5% ~ 90%
InLine® Gigabit Network Switch 16-Port, 1Gb/s, 19" 1U, fanless
This gigabit switch is easy to install and will help you expand your network quickly and reliably. All sixteen ports auto-sense the speed of connected devices and support Auto MDI/MDI-X crossover detection, so you don't have to worry about the type of cable you're using. Each individual port negotiates its optimal speed and operation in half or full duplex mode. Fast store-and-forward switching prevents corrupted packets from being passed onto the network. Supports IEEE802.3az Energy Efficient Ethernet (EEE), reduced power consumption through cable length detection and automatic signal strength. This helps to reduce energy consumption and protect our environment.
- Chipsets: RTL8382L + RTL8218D + 2x RTL8231
- Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3x Full Duplex and flow control, IEEE 802.3az Energy Efficient Ethernet (EEE)
- Ports: 16x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X
- LED indicators: PWR, LNK/ACT
- Network cable: 10BASE-T: UTP category 3, 4, 5 cable or higher (= 100m)
- 100BASE-TX: UTP category 5, 5e cable or higher (= 100m)
- 1000BASE-T: UTP category 5e cable or higher (= 100m)
- MAC address table: 8K, automatic learning, automatic updates
- Jumbo Frame: 9216 bytes
- Transmission type: Store-and-forward
- Bandwidth: 32Gbit
- Dimensions ( W x D x H): 480x180x44mm
- Weight: approx. 2.15 kg
- Voltage consumption: 100~240V AC, 50/60Hz
- Power consumption: max 21 watts
- Ambient conditions: operating temperature 0-40°C, lag temperature -40-70°C, operating humidity 10-90% non-condensing, storage humidity 5-90% non-condensing
Gigabit Switch, 8-Port, Longshine LCS-GSP8108, Desktop, PoE+, fanless
The device is a powerful, high-performance Gigabit Ethernet Switch, with all 8 ports capable of 10/100/1000Mbps auto-negotiation operation (NWay), which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for microsegmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100/1000Mbps autosensing ability provides an easy way to migrate 10/100Mbps to 1000Mbps network with no pain. This switch supports PoE, which supplies power for connected devices via CAT 5 and above twisted cables. By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network. You could easily connect a Wireless AP or a VoIP phone to this switch without looking outlets for them. Over current protection and circuit shorting protection are also supported to ensure the safety. The switch is plug-n-play without any software to configure and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LED indicators on the front-panel provide the operating status of individual port and whole system.
- Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab standard
- Compliant with IEEE 802.3af/at PoE standard (DTE power via MDI)
- Provides 8 PoE ports with classification identify, Supports 31.5W maximum per PoE port
- Supports over current protection and circuit shorting protection
- 8 * RJ-45 ports for 1000BASE-TX and 100BASE-T and 10BASE-T connectivity
- Supports MDI/MDI-X auto crossover
- Supports 136W Max Full load: 31.5W(at) x 4P + 5W = 131W 15.4W(af) x 8P + 5W = 128.2W
- Wire-speed packet filtering and forwarding rate
- Store-and-forward architecture filters fragment & CRC error packets
- Supports extensive LED indicators for network diagnostics
- Internal universal switching power supply
- Standard: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T, IEEE 802.3af/at PoE standard (DTE power via MDI), IEEE802.3x flow control
- Interface 8 * 10/100/1000 Mbps auto MDI/MDI-X RJ-45 ports (Port 1~8 support PoE power feeding)
- Network Data Rate 10/100/1000Mbps Auto-negotiation
- Transmission Mode 10/100Mbps: Full-duplex, Half-duplex, 1000Mbps Full-duplex
- LED Indications System: Power,Loop ,Ports: Link/ACT, PoE
- Memory: 8K MAC address table, 9216 bytes jumbo packet length, 128K bytes buffer Memory
- Operating Temperature 0° ~ 40°C, Operating Humidity 10% - 90% (non-condensing)
- Power Supply 55V 2.73A 100-240V/47-63 Hz universal input
- Included angle for 19" systems
- fanless
Longshine Gigabit Switch, 24-Port, LCS-GS9428-A, 19"-Version, Web Smart SNMP
Increase your data throughput with the GS9428 24-port Gigabit Web Smart SNMP Switch. It offers 24 10/100/1000Mbps Gigabit ports for a true Gigabit connection. You are now able to realize powerful applications over your network. By simple
management functions via WEB, you can adapt the switch to your environment. This switch also offers 4 Mini GBIC slots for flexible switching to fiber optics. The management functions enable you to use the network efficiently. VLAN reduces the
Collisions with broadcasting files. Port aggregation allows you to increase bandwidth. QoS secures bandwidth for certain applications, such as VOIP or video conferencing. The
802.3x and backpressure function allows secure data transport.
management functions via WEB, you can adapt the switch to your environment. This switch also offers 4 Mini GBIC slots for flexible switching to fiber optics. The management functions enable you to use the network efficiently. VLAN reduces the
Collisions with broadcasting files. Port aggregation allows you to increase bandwidth. QoS secures bandwidth for certain applications, such as VOIP or video conferencing. The
802.3x and backpressure function allows secure data transport.
- 24 10/100/1000Mbps Gigabit Ethernet ports for easy network connectivity.
- Applicable with up to 4 SFP ports for optional fiber optic connections.
- Supports auto-detection for miniGBIC module slots
- Auto-discovery function for easy network management.
- supports port mirroring.
- allows up to 24-group bundling.
- Supports QoS function, port base, tag base, DSCP priority
- Supports rate limit (ICMP rate, broadcast rate, multicast rate), Ingress/Egress Rate)
- supports full duplex flow control and half duplex back pressure
- non-blocking wire-speed switching performance
- supports 8K MAC entries and 24 groups VLAN table
- offers firmware upgrade, SNMP
- supports Jumbo frame 9Kbytes
- 500Kbytes cache
- supports Web-based management interface.
- Supplied with: Gigabit Switch 24-Port LCS-GS9428-A, power cord, 19"-angle, rubber feet, instructions
InLine® PoE+ Gigabit Network Switch 24 port, 1 Gb/s, 2xSFP,19"1U(incl. brackets)
The InLine® PoE++ Gigabit Network Switch is a fast and flexible solution for upgrading the existing network to the Power over Ethernet System IEEE 802.3af / 802.at / 802.3bt as well as a fiber-optic connection to bridge longer distances.
The switch provides protection against, for example, overload, overvoltage and overheating at each port. In addition, the switch offers IEEE 802.3af/at PoE+ on ports 5-16 with up to 32 watts of power and IEEE 802.3bt PoE++ on ports 1-4 with up to 60 watts of power via single Cat. 5e/6/6A/8.1 Ethernet cable with a PoE budget of 300W and a combined total power of 330W.
16x 10/100/1000MBit/s PoE ports solve the problem of a limited number of available power outlets, providing system administrators with a flexible solution to power almost anywhere the powering network device, such as PoE-enabled IP cameras or wireless Access Points (with heating also).
The switch menu can be password protected to prevent unauthorized access.
- Standards:
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX Gbit/s Ethernet over Fiber-Optic, IEEE 802.3x Full Duplex and flow control, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus, IEEE 802.3bt Power over Ethernet ++, IEEE 802.3az Energy Efficient Ethernet
- Ports: 16x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X, 2x 1000Mb/s SFP
- PoE ports: 16 (PoE++ 1-4 / PoE+ 5-16)
- PoE budget 300W
- Total output: 330W
- LCD display: Real-time display of PoE operating status
- PoE output power: Port 1-4 max. 60W, port 5-16 max. 32W
- Network cable: Cat. 5e/6/6A/8.1 cable (≤ 100m)
- 1000Base-X: MMF, SMF
- MAC address table: 8K, automatic learning, automatic updates
- Jumbo Frame: 9216 Bytes
- Packet buffer: 4.1Mbit
- Transmission method: Store-and-forward
- Packet forwarding rate: 26.78 million packages per second
- Bandwidth: 36Gbit
- Number of fans: 3
- Dimensions: (W x D x H): 440x232x45mm
- Weight: approx. 3.2kg
- Mains input: 100~240V AC, 50/60Hz
- Environmental conditions:
Operating temperature -10-60°C, storage temperature -40-70°C, humidity in operation 10-90% non condensing, humidity during storage 5-90% non condensing
- Surge protection: ± 6KV
The switch provides protection against, for example, overload, overvoltage and overheating at each port. In addition, the switch offers IEEE 802.3af/at PoE+ on ports 5-16 with up to 32 watts of power and IEEE 802.3bt PoE++ on ports 1-4 with up to 60 watts of power via single Cat. 5e/6/6A/8.1 Ethernet cable with a PoE budget of 300W and a combined total power of 330W.
16x 10/100/1000MBit/s PoE ports solve the problem of a limited number of available power outlets, providing system administrators with a flexible solution to power almost anywhere the powering network device, such as PoE-enabled IP cameras or wireless Access Points (with heating also).
The switch menu can be password protected to prevent unauthorized access.
- Standards:
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX Gbit/s Ethernet over Fiber-Optic, IEEE 802.3x Full Duplex and flow control, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus, IEEE 802.3bt Power over Ethernet ++, IEEE 802.3az Energy Efficient Ethernet
- Ports: 16x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X, 2x 1000Mb/s SFP
- PoE ports: 16 (PoE++ 1-4 / PoE+ 5-16)
- PoE budget 300W
- Total output: 330W
- LCD display: Real-time display of PoE operating status
- PoE output power: Port 1-4 max. 60W, port 5-16 max. 32W
- Network cable: Cat. 5e/6/6A/8.1 cable (≤ 100m)
- 1000Base-X: MMF, SMF
- MAC address table: 8K, automatic learning, automatic updates
- Jumbo Frame: 9216 Bytes
- Packet buffer: 4.1Mbit
- Transmission method: Store-and-forward
- Packet forwarding rate: 26.78 million packages per second
- Bandwidth: 36Gbit
- Number of fans: 3
- Dimensions: (W x D x H): 440x232x45mm
- Weight: approx. 3.2kg
- Mains input: 100~240V AC, 50/60Hz
- Environmental conditions:
Operating temperature -10-60°C, storage temperature -40-70°C, humidity in operation 10-90% non condensing, humidity during storage 5-90% non condensing
- Surge protection: ± 6KV
Offer
Longshine 2,5 Gb/s Switch, Metal, Desktop
The 5 port 2.5GBase-T Switch supports plug & play, enterprise-level quality features. It is a costeffective product solution for the small and medium business, even for high end home application since users could easily upgrade to a 2.5 Gigabit speed by leveraging existing CAT5e cabling. The switch supports 10Mbps, 100Mbps, 1Gbps & 2.5Gbps 4-speed auto-negotiation. It provides the rich LEDs to display 10M/100M/1G Link/Act, 2.5G Link/Act, Loop detection. Moreover, the solid cap also fanless design to meet high quality SMB requirement. It will be easy to connect to backbone network switch. Also the switch supports IEEE 802.3az Energy Efficient Ethernet and GreenEthernet function to save the Switch power consumption.
- RJ-45 ports for 2.5GBase-T connectivity
- IIEEE802.3bz-2016 2.5GNBASE-T compliant
- Supports IEEE 802.3az-2010 Energy Efficient Ethernet
- Supports Green Ethernet (Link-Down Power Saving & Link-Up Cable Length Power Saving)
- Supports IEEE 802.3x Full-Duplex Flow Control
- Supports auto-negotiation for 2.5G/1G/100M/10M
- Supports Crossover Detection & Auto-Correction
- Complies with IEEE802.3, 802.3u, 802.3ab, 802.3az, 802.3bz Ethernet standards
- Supports Loop detection switch
- Supports LED on/off switch
- MTBF : Over 50,000h @50°C
- ESD IEC61000-4-2 Contact +/-4KV, Air +/- 8KV
- EFT IEC61000-4-4 Power 2KV, LAN 1KV
- Surge IEC61000-4-5 2KV
- Solid cap used for better reliability
- Fanless to keep running silently
- Wall mount support
- Standard: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3az, IEEE 802.3bz standards
- Interface: 2.5GBase-T RJ-45 ports
- Rich LED indicators: Power (Green) Loop (Red), 2.5G Link/Act (Green), 1G/100M/10M Link/Act (Amber)
- MAC Address Table: 16K
- Jumbo Frame: 12K Bytes
- Buffer Memory: 12Mbit
- Operating Temperature: 0 - 50 °C
- Operating Humidity: 10% - 90% (non-condensing)
- Dimension: 250 x 104 x 27mm
- Power Supply: External Power Adapter: +12 V DC / 1.0 A
- Chipset: RTL8372+RTL8221B
ATEN 10G Fibre SFP+ Module
The 2A-142G 10G Single-Mode/10KM and 2A-141G 10G Multi-Mode/300M Fiber Optic SFP+ Module is designed for use in a 10GbE Ethernet environment, which allows you to connect a single-mode Gigabit Ethernet network cable to the SFP+ port to connect to a network switch. As a hot-pluggable module with a standard duplex connector for fiber optic communication, the 2A-142G works with single-mode fiber (SMF) connections. This makes the module a cost-effective, high-performance transceiver that significantly increases the range of a compatible network switch.
Offer
Longshine 10" installation bracket for 8.5" network switch
Use these brackets to install Longshine 8.5" network devices into a 10" cabinet.
- for installation of Longshine 8.5" desktop switches into 10" cabinet
- fits LCS-GS8208-A, LCS-GS8116, LCS-GS8124 and LCS-FS8116-B
- 2 brackets made of metal, black
Longshine LCS-GSP9428 Gigabit PoE+ Switch, 24-Port Managed, 19",+ 4 SFP-Ports
The Gigabit PoE+ Smart Managed Switch is equipped with 24 gigabit RJ45 ports and 4 SFP slots. Theswitch supports high performance, enterprise-level security control & QoS Layer 2 managementfeatures. It supports the PoE+ (802.3af/at) standard and provides power to connected PD devices viaCAT 5 twisted cables. With a total PoE power budget is 370W, up to 30W per port. The LCSGSP9428can easy connect the high-powered devices such as Wireless AP, IP Cameras or VoIPPhones.
The WebGUI control each port status and bandwidth control by port rate limiting. The Storm Controlfeature protects against Broadcast, Multicast and Unicast Storm. The rich Quality of Service (QoS) &VLAN provides enhanced traffic management capabilities to move your data smoother and faster. Thedevice supports a complete line up of layer 2 features, including 802.1Q tag VLAN, Port Isolation, PortMirroring, STP/RSTP, Link Aggregation Group and 802.3x Flow Control function. It also supportsSNMP management functions.
The switch complies with IEEE802.3az Energy Efficient Ethernet to save power consumption, SupportIGMP Snooping function to improve traffic performance.
KEY FEATURES
The WebGUI control each port status and bandwidth control by port rate limiting. The Storm Controlfeature protects against Broadcast, Multicast and Unicast Storm. The rich Quality of Service (QoS) &VLAN provides enhanced traffic management capabilities to move your data smoother and faster. Thedevice supports a complete line up of layer 2 features, including 802.1Q tag VLAN, Port Isolation, PortMirroring, STP/RSTP, Link Aggregation Group and 802.3x Flow Control function. It also supportsSNMP management functions.
The switch complies with IEEE802.3az Energy Efficient Ethernet to save power consumption, SupportIGMP Snooping function to improve traffic performance.
KEY FEATURES
- 24 * RJ-45 ports for PoE+ 10/100/1000Mbps connectivity
- 4* SFP ports for 100/1000Mbps Fiber connectivity
- Complies with IEEE802.3, 802.3u, 802.3ab, 802.3x, 802.3az, 802.3af/at Ethernet standards
- Supports IEEE802.3x Flow Control and Back-Pressure control
- Supports STP & RSTP
- Supports LLDP Discovery
- Supports VLAN : Static, Port Based, Tag Based, Voice OUI mode
- Supports QoS : CoS, DSCP, CoS-DSCP, IP Precedence
- Supports Security : Management Service (Telnet, HTTP, HTTPS, SNMP), Protected Port, Storm Control, DoS attack prevention
- Supports Storm Filter (Broadcast, Unknown Multicast, Unknown Unicast)
- Supports port based Ingress/Egress rate limit
- Supports 8 queues is handled SP and WRR
- Supports Jumbo Frame : 1518~10K Bytes
- Supports 8 Link Aggregation Groups with Static & LACP types
- Support port mirroring, Ping Testing, Copper Testing
- Supports SNMP access control & trap event
- Supports IGMP Snooping v2/v3
- Supports IEEE802.3az EEE enable and disable
- Supports Firmware upgrade and backup
- Supports Configuration upgrade and backup
- Supports per port PoE+ Power Budget Management
- Total PoE power budget 370W
- With Fan Design
- Standard
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3az, IEEE802.1p, IEEE802.3af/at standards - Interface
24 * 10/100/1000Mbps PoE+ RJ-45 NWay ports
4 * SFP 100/1000Mbps ports
1 * Reset to default setting button - Rich LED indicators
Power (Green)
System (Green)
Port: Link/Act(Green)
Port: PoE+ Link (Green) - MAC Address Table
8K - Jumbo Frame
9K Bytes - Buffer Memory
524.8K Bytes - Operating Temperature
0°- 50°C (32°- 122°F) - Operating Humidity
5% ~ 90% (non-condensing) - Dimension
441x 310x 45mm - Power Supply
Internal Switching Power Supply, 100~240VAC - Chipset
RTL8382M-VB-CG + RTL8218B-VC-CGx2 + RTL8214FC-VC-CG + PD69208x3 + PD69200
Longshine Bracket-10.5, mounting angle for 10.5" switches in 19" cabinet
Longshine Bracket-10.5, mounting angle for 10.5" switches in 19" cabinet
- for installing Longshine 10.5" desktop switches in the 19" cabinet
- suitable e.g. B. for LCS-FS8124-B
- 2 brackets made of metal, black
ATEN ES0154P 54-Port GbE PoE Managed Switch
The ES0154P 54-Port Layer 2+ Gigabit Ethernet Managed Switch is ideal for installation with ATEN KVM over IP products. It simplifies the process of building OT infrastructure with the ATEN KVM over IP series by eliminating the complexities of setup. It provides a high-performance 54-port configuration, a complete array of L2+ features, and advanced functionalities including Layer 3 static route, DHCP server, IPv6 support, and LLDP, making it a versatile solution for enhancing network performance. It offers a combination of SFP28 (fiber) and RJ-45 (copper) ports for servicing a range of network needs.
The ES0154P supports 6 (1G/10G/25G) SFP28, 48 (10M/100M/1G) RJ-45 with PoE+ (Support 802.3at/af) ports, and PoE++ (Support 802.3bt) ports (41-48 ports only). The ES0154P is equipped with Power over Ethernet (PoE) functionality, featuring a substantial 740 Watts power budget distributed across its 48 RJ-45 ports. This eliminates the necessity for external power adapters and leads to a substantial reduction in power configuration expenses.
Deploying the ES0154P is quick and hassle-free. Its plug-and-play design eliminates the need for software installation or device configuration. Just connect the transmitters and receivers to the ES0154P using Cat 5e/6 cables. With a full range of functions to help with optimizing network efficiency, manageability and reliability for their network environment, the ES0154P serves as an ideal network switch solution. It is particularly valuable in applications where connected devices play a critical role in network operation, including OT infrastructure for both SMBs and enterprises.
The ES0154P supports 6 (1G/10G/25G) SFP28, 48 (10M/100M/1G) RJ-45 with PoE+ (Support 802.3at/af) ports, and PoE++ (Support 802.3bt) ports (41-48 ports only). The ES0154P is equipped with Power over Ethernet (PoE) functionality, featuring a substantial 740 Watts power budget distributed across its 48 RJ-45 ports. This eliminates the necessity for external power adapters and leads to a substantial reduction in power configuration expenses.
Deploying the ES0154P is quick and hassle-free. Its plug-and-play design eliminates the need for software installation or device configuration. Just connect the transmitters and receivers to the ES0154P using Cat 5e/6 cables. With a full range of functions to help with optimizing network efficiency, manageability and reliability for their network environment, the ES0154P serves as an ideal network switch solution. It is particularly valuable in applications where connected devices play a critical role in network operation, including OT infrastructure for both SMBs and enterprises.
- Supports plug-and-play with KE, VE89 series devices
- Supports 48 Gigabit Ethernet ports and 6 SFP28 uplink ports (up to 25Gbps)
- High-performance Gigabit Ethernet L2+ access switch with 396 Gbps switching capacity – significantly improve the responsiveness of applications and file transfer times
- 802.3af PoE / 802.3at PoE+ / 802.3bt PoE++ (41-48 ports only) port configuration and scheduling
- Supports IGMP v1/v2/v3 Snooping and IGMP v1/v2 Querier
- Supports IGMP Snooping Fast Leave
- Supports Flow Control
- Comprehensive QoS – allowing the marking, classification, and scheduling of up to four traffic types across the network
- Enhanced Security – Port Security limits the total number of devices using a switch port and protects against MAC flooding attacks
- Supports IEEE 802.1w Rapid Spanning Tree Protocol – ensuring a faster recovery from failed links and enhancing overall network stability and reliability
- Supports IPv4, IPv6
- 1x ES0154P 54-Port Layer 2+ Gigabit Ethernet Managed Switch with PoE
- 1x power cord
- 1x RJ-45 to DB-9 serial console cable
- 1x grounding wire
- 6x port dust covers
- 1x mounting kit
- 1x user instructions
| Connectors | |
| RJ-45 10/100/1000 Ports | 48 |
| SFP28 Uplink Ports | 6 |
| Console Ports | 1 x RJ45 |
| Remote Console | 1 X RJ45 |
| USB Port | 1 |
| Performance | |
| Switching Capacity | 396 Gbps |
| Forwarding Rate | 295 Mpps |
| Flash Memory | 256 MB |
| DRAM | 1GB |
| MAC Address Table Size | 32K |
| Jumbo Frames | 10 KB |
| Auto-negotiation | Yes |
| Maximum Input Power Rating | 100-240V AC,50-60Hz |
| Power Consumption | 835W (MAX) 2BTU 849BTU |
| Power over Ethernet (PoE) | |
| Standard compliance | 802.3af PoE / 802.3at PoE+ / 802.3bt PoE++ (41-48 ports only) |
| Number of Ports That Support PoE/PoE+ | 48 ports |
| Total PoE Power budget | 740W |
| Max. PoE Power budget per port | PoE : 15.4W/ PoE+: 30W / PoE++: 90W(41-48 ports only) |
| Environmental | |
| Operating Temperature | -5–45°C |
| Storage Temperature | -40–70°C |
| Humidity | 5%–95% RH, Non-condensing |
| Physical Properties | |
| Rack Space | 19" |
| Housing | Metal |
| Weight | 5.42 kg ( 11.94 lb ) |
| Dimensions (L x W x H) | 44.20 x 42.00 x 4.36 cm (17.4 x 16.54 x 1.72 in.) |
| Carton Lot | 1 pc |
Longshine LCS-MGBIC-SX mini GBIC Module fiber multimode with LC connector
Longshine LCS-MGBIC-SX - Mini-GBIC SFP (SMALL FROM FACTOR PLUGGABLE ) Module plug-in and hot-swapp. Allows integration between fibre and copper, wherever SFP slots are available for Gigabit LAN connections.
- MSA compatible SFP.
- For multiple mode applications.
- Standard duplex LC connector.
- Up to 850 nm & 1.25 Gb/s
- IEEE 802.3z Gigabit Ethernet compliant.
- Power supply: + 3.3V
- EEPROM with serial ID functionality.
- TTL signal detection indicator
- PECL logic input and output levels.
- Uncooled VCSEL laser structure
- Operating temperature 0 degrees ot +70 degrees.
- Laser safety compliance Class 1M
- Maximum distance 550m
InLine® SFP+ module fibre optic 1310nm singlemode with LC sockets, 10km, 10Gb/s
Small Form-Factor Pluggable (SFP+) 10-Gigabit transceiver for a transmission rate of 10 Gb/s over distances of up to 10 kilometers
- Compliant with SFP MSA and SFF-8431
- Optical interface according to IEEE 802.3ae
- Lane bit rate: 10.3 Gb/s
- 1310nm DFB and PIN photodetector
- I2C interface with integrated digital diagnostic monitoring
- Simple +3.3V power supply
- Hot pluggable
- DDM: Digital diagnostic monitoring interface
- Transmission distance: 10km @ SMF
- Optical interface: LC duplex
- Extinction ratio ER: >= 3.5 dB
- Receiver sensitivity: <= 14.4 dBm
- Pin definitions: 1-10 towards BEZEL, 11-20 towards ASIC
- Generic coding
- Compatible with SFF-8431
- Operating case temperature: 0°C ~ 70°C
- Storage temperature: -40°C ~ 85°C
ATEN ES0154 54-Port GbE Managed Switch
The ES0154 54-Port Layer 2+ Gigabit Ethernet Managed Switch is ideal for installation with ATEN KVM over IP products. It simplifies the process of building OT infrastructure with the ATEN KVM over IP series by eliminating the complexities of setup. It provides a high-performance 54-port configuration, a complete array of L2+ features, and advanced functionalities including Layer 3 static route, DHCP server, IPv6 support, and LLDP, making it a versatile solution for enhancing network performance. It offers a combination of SFP28 (fiber) and RJ-45 (copper) ports for servicing a range of network needs.
The ES0154 delivers 6 (1G/10G/25G) SFP28 and 48 (10M/100M/1G) RJ-45 ports.
Deploying the ES0154 is quick and hassle-free. Its plug-and-play design eliminates the need for software installation or device configuration. Just connect the transmitters and receivers to the ES0154 using Cat 5e/6 cables. With a full range of functions to help with optimizing network efficiency, manageability and reliability for their network environment, the ES0154 serves as an ideal network switch solution. It is particularly valuable in applications where connected devices play a critical role in network operation, including OT infrastructure for both SMBs and enterprises.
The ES0154 delivers 6 (1G/10G/25G) SFP28 and 48 (10M/100M/1G) RJ-45 ports.
Deploying the ES0154 is quick and hassle-free. Its plug-and-play design eliminates the need for software installation or device configuration. Just connect the transmitters and receivers to the ES0154 using Cat 5e/6 cables. With a full range of functions to help with optimizing network efficiency, manageability and reliability for their network environment, the ES0154 serves as an ideal network switch solution. It is particularly valuable in applications where connected devices play a critical role in network operation, including OT infrastructure for both SMBs and enterprises.
- Supports plug-and-play with KE, VE89 series devices
- Supports 48 Gigabit Ethernet ports and 6 SFP28 uplink ports (up to 25Gbps)
- High-performance Gigabit Ethernet L2+ access switch with 396 Gbps switching capacity – significantly improve the responsiveness of applications and file transfer times
- Supports IGMP v1/v2/v3 Snooping and IGMP v1/v2 Querier
- Supports IGMP Snooping Fast Leave
- Supports Flow Control
- Comprehensive QoS – allowing the marking, classification, and scheduling of up to four traffic types across the network
- Enhanced Security – Port Security limits the total number of devices using a switch port and protects against MAC flooding attacks
- Supports IEEE 802.1w Rapid Spanning Tree Protocol – ensuring a faster recovery from failed links and enhancing overall network stability and reliability
- Supports IPv4, IPv6
- 1x ES0154 54-Port Layer 2+ Gigabit Ethernet Managed Switch
- 1x power cord
- 1x RJ-45 to DB-9 serial console cable
- 1x grounding wire
- 6x port dust covers
- 1x mounting kit
- 1x user instructions
| Connectors | |
| RJ-45 10/100/1000 Ports | 48 |
| SFP28 Uplink Ports | 6 |
| Console Ports | 1 x RJ45 |
| Remote Console | 1 X RJ45 |
| USB Port | 1 |
| Performance | |
| Switching Capacity | 396 Gbps |
| Forwarding Rate | 295 Mpps |
| Flash Memory | 256 MB |
| DRAM | 1GB |
| MAC Address Table Size | 32K |
| Jumbo Frames | 10 KB |
| Auto-negotiation | Yes |
| Maximum Input Power Rating | 100-240V AC,50-60Hz |
| Power Consumption | 54W (MAX) 177BTU |
| Environmental | |
| Operating Temperature | -5–45°C |
| Storage Temperature | -40–70°C |
| Humidity | 5%–95% RH, Non-condensing |
| Physical Properties | |
| Rack Space | 19" |
| Housing | Metal |
| Weight | 4.68 kg ( 10.32 lb ) |
| Dimensions (L x W x H) | 44.20 x 42.00 x 4.36 cm (17.4 x 16.54 x 1.72 in.) |
| Carton Lot | 1 pc |
ATEN ES0152P 52-Port GbE PoE Managed Switch
The ES0152P is a feature-rich managed switch for ATEN KE series KVM over IP extenders and VE89 series Video over IP extenders. Ideal for installation in combination with the KE / VE89 series products, the ES0152P helps users build their OT infrastructure with the KE series by eliminating the hassles of complicated setup.
Deploying the ES0152P is fast and easy. With everything plug and play, there is no need to install software or configure devices. Simply connect the KE / VE89 transmitters and receivers to the ES0152P using Cat 5e/6 cables and all KE / VE89 series devices on the same LAN will automatically be detected.
The ES0152P network switch provides a 52-port, high-performance configuration, a complete array of L2 features and advanced functionalities including Layer 3 static route, DHCP server, IPv6 support and LLDP, delivering a versatile solution for improving network performance.
The ES0152P offers a combination of SFP+ (fiber) and RJ45 (copper) ports for servicing a range of network needs. It supports 4 (1G/10G) SFP+ and 48 (10M/100M/1G) RJ45 with PoE+ (Support 802.3at/af) ports. Featuring Power over Ethernet (PoE) function, the ES0152P can provide up to 740 Watts power budget across 48 RJ45 ports thus eliminating the need for a power adapter and effectively reducing the power configuration cost.
The ES0152P comes with embedded DMS functions to facilitate device management anytime and anywhere. Its intuitive, user-friendly interface enables IT administrators to set up and manage their networks and all the connected KE / VE89 devices effortlessly. It also has comprehensive security features such as IP source guard and ACL to guard your network from unauthorized access.
With a full range of functions to help with optimizing network efficiency, manageability and reliability for their network environment, the ES0152P is an ideal network switch solution for SMBs and enterprises, and even more so for those that have chosen to adopt ATEN KE series KVM over IP extenders or VE89 series Video over IP extenders into their OT infrastructure.
Deploying the ES0152P is fast and easy. With everything plug and play, there is no need to install software or configure devices. Simply connect the KE / VE89 transmitters and receivers to the ES0152P using Cat 5e/6 cables and all KE / VE89 series devices on the same LAN will automatically be detected.
The ES0152P network switch provides a 52-port, high-performance configuration, a complete array of L2 features and advanced functionalities including Layer 3 static route, DHCP server, IPv6 support and LLDP, delivering a versatile solution for improving network performance.
The ES0152P offers a combination of SFP+ (fiber) and RJ45 (copper) ports for servicing a range of network needs. It supports 4 (1G/10G) SFP+ and 48 (10M/100M/1G) RJ45 with PoE+ (Support 802.3at/af) ports. Featuring Power over Ethernet (PoE) function, the ES0152P can provide up to 740 Watts power budget across 48 RJ45 ports thus eliminating the need for a power adapter and effectively reducing the power configuration cost.
The ES0152P comes with embedded DMS functions to facilitate device management anytime and anywhere. Its intuitive, user-friendly interface enables IT administrators to set up and manage their networks and all the connected KE / VE89 devices effortlessly. It also has comprehensive security features such as IP source guard and ACL to guard your network from unauthorized access.
With a full range of functions to help with optimizing network efficiency, manageability and reliability for their network environment, the ES0152P is an ideal network switch solution for SMBs and enterprises, and even more so for those that have chosen to adopt ATEN KE series KVM over IP extenders or VE89 series Video over IP extenders into their OT infrastructure.
- Auto detects KE/VE89 series devices
- Plug-and-play without additional settings
- Supports IGMP Snooping Fast Leave
- Supports Flow Control
- Supports IGMP v1/v2/v3 Snooping and IGMP v1/v2 Querier
- Supports 48 Gigabit Ethernet ports and 4 SFP uplink ports (10Gbps)
- High-performance Gigabit Ethernet L2 access switch with 176 Gbps switching capacity - significantly improve the responsiveness of applications and file transfer times
- Built in Device Management System (DMS) to provide an overview of all connected KE/VE89 devices for management
- Supports IEEE 802.1w Rapid Spanning Tree Protocol – ensuring a faster recovery from failed links and enhancing overall network stability and reliability
- Comprehensive QoS – allowing the marking, classification, and scheduling of up to four traffic types across the network
- Enhanced Security - Port Security limits the total number of devices using a switch port and protects against MAC flooding attacks
- IPv4/IPv6 Management
- 802.3af PoE/ 802.3at PoE+ Port configuration and scheduling
- 1x ES0152P 52-Port GbE PoE Managed Switch
- 1x AC Power Cord
- 1x RJ45 to DB9 Serial Console Cable
- 1x Foot Pad Set (4 pcs.)
- 1x Mounting Kit
- 1x User Instructions
| Connectors | |
| RJ-45 10/100/1000 Ports | 48 |
| SFP Uplink Ports | 4 |
| Console Ports | 1 x RJ45 |
| Performance | |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.95 Mpps |
| Jumbo Frames | 10240 Bytes |
| Maximum Input Power Rating | 100-240V AC,50-60Hz |
| Power Consumption | AC110V/885.36W; AC220V/858.09W (PoE on) |
| PoE | |
| Standard compliance | 802.3af PoE / 802.3at PoE+ |
| Number of Ports That Support PoE/PoE+ | 48 |
| Max. PoE Power budget per port | PoE : 15.4W/ PoE+: 30.0W |
| Total PoE Power budget | 740W |
| Environmental | |
| Operating Temperature | 0–50°C |
| Storage Temperature | -20–60°C |
| Humidity | 10–90% RH, Non-condensing |
| Physical Properties | |
| Rack Space | 19" |
| Housing | Metal |
| Weight | 5.60 kg ( 12.33 lb ) |
| Dimensions (L x W x H) | 44.20 x 37.50 x 4.40 cm (17.4 x 14.76 x 1.73 in.) |
| Carton Lot | 2 pcs |
| Note | For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format. |
