Triton RZA - Demountable bolted floor-standing distributor, IP20, load capacity up to 800 kg
Demountable bolted floor-standing distribution box, IP20, load capacity up to 800 kg.
Large distribution board and narrow door - this is exactly the design of the RZA enclosure. Thanks to the robust construction of the individual parts and the sophisticated tap-tide screw connections, the high load capacity and above all the stability of the welded version have been retained.
Demountability
The individual parts of the RZA are bolted together, resulting in a compact design with the same load-bearing capacity as the welded distributor. Most of the parts are connected using thread-forming Taptite screws. This ensures that the screw connections are still very strong even after repeated disassembly. The distributor is supplied assembled and can be partially or completely dismantled for transport to hard-to-reach places.
High stability of the construction
The RZA has a robust welded construction. The high quality of workmanship and the latest technologies ensure the great appearance of the distributor. The double doors are fitted with plug-in hinges.
Flexible door opening
The hinge system allows the door to be opened by almost 180°. The doors can be easily removed and the door hinge changed.
Triton lever handles
We manufacture our own swivelling lever handles for free-standing distributors. By replacing the plastic module (not included in the accessory pack), a semi-cylindrical locking cylinder can also be used (optional accessory). Patent: PUV 2013-27443
Adjustable vertical locking rails
The vertical 19" raster rails are infinitely adjustable in the enclosure depth. This facilitates the installation of components and cable management.
Removable side and rear panels
The RZA has a welded frame and removable side panels. Like the rear panel, these are attached to the frame with keyed alike locks as standard.
Special doors for ventilation units
A special solid sheet metal door for the installation of the RAx-CH-X0x-X3 ventilation units can be ordered for this type of distributor. More information can be found in the Active ventilation section.
Break-out panels
The cable entries in the rear part of the distributor are fitted with break-out blanking plates. They can be sealed against dust using the brush strip. A plastic frame protects the cables from damage (both are included in the accessory pack).
Opening for the ventilation unit
The large opening with a break-out panel allows a Triton fan panel to be fitted and removed from the outside without the need for screws.
Castors, levelling feet, plinth
The distributor can be installed on levelling feet (part of the accessory pack) using the optional equipment for plinths, castors or heavy-duty castors with support frame if necessary.
Rear panel
The removable side and rear panels have the same keyed alike locks as the front door as standard.
Ventilation slots in the frame
The RZA distributors have ventilation slots in the frame for the supply of cooling air to the installed components. Cooling can be supported by installing a ventilation unit.
Earthing
All removable parts are interconnected and earthed in accordance with the relevant standard requirements.
Flex frame
(applies to 800 mm wide distributors) The system enables the installation of adjustable vertical mounting rails at 19", 21" and 23" spacing, depending on the technology used.
Centre pair of vertical mounting rails
For distribution boards with a depth of over 800 mm, we supply a third pair of vertical mounting rails as standard, which do not interfere with the installation of deeper components thanks to their open profile. Shorter components can be attached to the centre verticals using various types of supports (optional accessories).
Swivelling frame
The 800 mm wide RMA and RZA distributors can be fitted with a swivelling frame with a load capacity of 150 kg. The maximum installation depth for 19" accessories is 330 mm.
Large distribution board and narrow door - this is exactly the design of the RZA enclosure. Thanks to the robust construction of the individual parts and the sophisticated tap-tide screw connections, the high load capacity and above all the stability of the welded version have been retained.
Demountability
The individual parts of the RZA are bolted together, resulting in a compact design with the same load-bearing capacity as the welded distributor. Most of the parts are connected using thread-forming Taptite screws. This ensures that the screw connections are still very strong even after repeated disassembly. The distributor is supplied assembled and can be partially or completely dismantled for transport to hard-to-reach places.
High stability of the construction
The RZA has a robust welded construction. The high quality of workmanship and the latest technologies ensure the great appearance of the distributor. The double doors are fitted with plug-in hinges.
Flexible door opening
The hinge system allows the door to be opened by almost 180°. The doors can be easily removed and the door hinge changed.
Triton lever handles
We manufacture our own swivelling lever handles for free-standing distributors. By replacing the plastic module (not included in the accessory pack), a semi-cylindrical locking cylinder can also be used (optional accessory). Patent: PUV 2013-27443
Adjustable vertical locking rails
The vertical 19" raster rails are infinitely adjustable in the enclosure depth. This facilitates the installation of components and cable management.
Removable side and rear panels
The RZA has a welded frame and removable side panels. Like the rear panel, these are attached to the frame with keyed alike locks as standard.
Special doors for ventilation units
A special solid sheet metal door for the installation of the RAx-CH-X0x-X3 ventilation units can be ordered for this type of distributor. More information can be found in the Active ventilation section.
Break-out panels
The cable entries in the rear part of the distributor are fitted with break-out blanking plates. They can be sealed against dust using the brush strip. A plastic frame protects the cables from damage (both are included in the accessory pack).
Opening for the ventilation unit
The large opening with a break-out panel allows a Triton fan panel to be fitted and removed from the outside without the need for screws.
Castors, levelling feet, plinth
The distributor can be installed on levelling feet (part of the accessory pack) using the optional equipment for plinths, castors or heavy-duty castors with support frame if necessary.
Rear panel
The removable side and rear panels have the same keyed alike locks as the front door as standard.
Ventilation slots in the frame
The RZA distributors have ventilation slots in the frame for the supply of cooling air to the installed components. Cooling can be supported by installing a ventilation unit.
Earthing
All removable parts are interconnected and earthed in accordance with the relevant standard requirements.
Flex frame
(applies to 800 mm wide distributors) The system enables the installation of adjustable vertical mounting rails at 19", 21" and 23" spacing, depending on the technology used.
Centre pair of vertical mounting rails
For distribution boards with a depth of over 800 mm, we supply a third pair of vertical mounting rails as standard, which do not interfere with the installation of deeper components thanks to their open profile. Shorter components can be attached to the centre verticals using various types of supports (optional accessories).
Swivelling frame
The 800 mm wide RMA and RZA distributors can be fitted with a swivelling frame with a load capacity of 150 kg. The maximum installation depth for 19" accessories is 330 mm.
- 19" free-standing distribution board can be dismantled, with IP20 degree of protection
- The distributor includes 4 (6 for distributors deeper than 800 mm) adjustable vertical latching rails for installing the components.
- Distributor construction: Welded steel frame with removable bolted walls, single or double-leaf doors in solid sheet metal, perforated (80 % and 86 % air passage) or glass door versions with 4 mm thick safety glass. They can be mounted at the front or rear of the distributor.
- The maximum permissible load capacity of the individual doors is 20 kg.
- The minimum application thickness is 65 µm.
- These cabinets are designed for the installation of data and telecommunications systems and their distribution systems.
- The distribution frame and all removable parts (side and rear panels, doors, etc.) are connected with earthing cables, which must be properly secured and plugged in for the entire service life of the enclosure.
- There is an M8 screw in the base of the distribution board as the main earthing point.
- Cable entries with break-out covers are located at the top and bottom.
- The recommended maximum static load of the distributor is 800 kg when using levelling feet or a plinth.
- Material: Tempered safety glass 4 mm, deep-drawn steel sheet, plastic parts, mounting material
Free-standing cabinet RZA
Cabinet can be disassembled, welded parts easily bolt together, IP20, capacity up to 800 kg
Removable parts
Individual RZA parts are bolted together to form a compact unit with the same maximum loading capacity as a welded cabinet. Most of the parts are joined by Tap-Tite thread-forming screws. This ensures an extremely high rigidity of the bolted connection even after being disassembled any number of times. The product is supplied assembled and can be moved to difficult-to-reach places after partial or complete disassembling.
Flex frame
(for cabinet of 800 mm width) This system enables sliding vertical rails to be installed in a span of 19“, 21“ and 23“, just as needed for the equipment being used.
Breakout-type blanking panels
Entry openings for cables (370 x 90 mm) in the rear part of the cabinet are covered with breakout-type blanking panels. To avoid dust penetration, it is possible to seal the cables at the entry opening by a brush strip, or simply secure by a plastic protective frame (both supplied with the cabinet).
A large opening in the top covered with a breakout-type blanking panel enables mounting and removal of a Tritón fan unit from the outside of the cabinet without the need of using screws.
Removable side panels and rear cover
RZA has a welded frame and removable side panels. These are fixed as standard to the frame using a lock with the same key as the door and rear cover
Rigid construction
The RZA has a robust bolted construction. High quality workmanship and up-to-date technology ensure a perfect look of the cabinet.
Flexible door opening
The hinge system allows the door to open almost 180°. The door can be easily removed and re-mounted to change the direction of opening.
Tritón handles
We manufacture our own handles for the free-standing cabinets. By replacing the plastic module (not included), a traditional or semicylindrical lock insert can be used. Patent: PUV 2013-27443
Door for fan units
With this cabinet type, it is possible to order a special metal door ready for mounting RAx-CH-X0x-X3 fan units. Further information is available in the section Active cooling.
Castors, levelling feet
Prepared for mounting castors and levelling feet.
