Patch panel Cat.6A
Up to 24 installation cables can be connected via LSA insulation displacement connectors in this 19" patch panel. The patch panel is designed for Cat. 6A and is fully shielded. The RJ45 connections are numbered consecutively.
- Suitable for mounting in the 19" server cabinet
- With 24 RJ45 sockets
- Connection of the installation cable via LSA insulation displacement connectors
- Designed up to Cat. 6A according to IEC 60603-7-5, fully shielded
- Configurable according to TIA/EIA-568A/B with colour coding
- with strain relief of the installation cables
- with earthing cable
- Enclosure can be opened without screws
Patch panel Cat.6A with dust protection
Up to 12 installation cables can be connected via LSA insulation displacement connectors in this 10" patch panel. The patch panel is designed for Cat. 6A and is fully shielded. The RJ45 connections are numbered consecutively. To protect the contacts from coarse dust, the sockets are equipped with an integrated dust protection which folds away inwards when the network cable is plugged in.
- Suitable for mounting in a 10" wall cabinet, incl. mounting material
- Only 23 mm high (0.5 U), slim design, so that e.g. two panels can also be mounted in one U. two panels in one RU
- With 12 RJ45 sockets
- Connection of the installation cable via LSA insulation displacement connectors
- Designed up to Cat. 6A according to IEC 60603-7-5, fully shielded
- Available according to TIA/EIA-568A/B with colour coding
- With strain relief of the installation cable
- With earthing cable
- Enclosure can be opened without screws
InLine® Blank patch panel
Patch panel for housing female-to-female feed-through interface modules with Snap-In quick disconnect technology. Ideal for grouping and interfacing different sections of a logically structured cabling.
- Modular with 24 locations (Fittings/Ports NOT included)
- Supports mounting of Snap-In Cat.6A, Cat.6, Cat.5 or other modules
- Installable in 19’ Rack cabinets
- Dimensions: 48.26cm wide, 1U high
- Includes Cable Management
- Includes grounding
- Colour light grey RAL7035
Patch panel Cat.6
Up to 24 installation cables can be connected via LSA insulation displacement connectors in this 48.26 cm (19") patch panel. The patch panel is designed up to Cat. 6 and is fully shielded. Due to the half height of the panel, it is possible to install 48 ports on just one height unit with 2 of these patch panels, ideal if, for example, the server rack needs to be extended. The RJ45 connections are numbered consecutively. The housing can be easily opened and closed again using the knurled screws on the rear.
- Suitable for mounting in 48.26 cm (19") cabinets
- With 24 connections (RJ45 sockets)
- Connection via LSA insulation displacement connectors with T568A/B colour coding
- Fully shielded, Cat. 6
- Complies with ISO/IEC 11801 class E
- Knurled screws for easy opening and closing
- Suitable for installation cable strands AWG22-26
- With earthing cable
- Slotted holes on the side for optimum installation in the 19’ enclosure
InLine® Desktop Consolidation Point Box Keystone RJ45, metal
Desk Mounted Consolidation Point box for RJ45 Keystone modules, for use as Consolidation Panel, direct mounting or mounting set on DIN rails in electrical distribution systems.
- No need to disassemble the Consolidation Point box during DIN Rail card installation
- The Desk Mounted Consolidation Point box has two levels. This positions the modules flush with the front panel.
- Suitable for the installation of 4 RJ45 Keystone modules
- Robust steel housing with cable management
- Reserved ground wire connection screw
- Keystone modules are not included
- Front side standard cut-out: 4 modules
- Back side: Cable clamps
- Material housing: SPCC steel
- Cable fastening: via cable ties
- Surface treatment: plastic powder cladding
- Operating / Storage temperature: -40~+70°C
- Operation / Storage humidity: 10%~85%
- Connection class: IP20
Patch panel Cat.5e
InLine® Patch panel Cat.5e, table/wall assembly 12-port
- Fully shielded
- With LSA IDC connection technology
- Table or wall mounting
- Cat. 5e
- 12x RJ45 socket
InLine® 16-way patch panel, Keystone empty panel with 3 brackets, 19", 1U
The empty patch panel with 3 brackets is designed for small wall-mounted and floor-standing network distributors and offers a solid solution for your network cabling needs. With 16 keystone openings, a 19-inch design (1U) and RAL-compatible colour, it fits seamlessly into standard racks. The three brackets ensure simple and already integrated cable routing, thus saving an additional U for an extra cable routing panel. Optional Keystone-compatible network and multimedia modules can be integrated into the openings in the empty panel. A pragmatic choice for an efficient network infrastructure.
