- Blog
- Career
- Company
- Contact
- Fast Order
- Greatly reduced
- Jobs
- Legal
-
Products
- Adapter / Converter
- Cables
- Computer cases / mobile racks
- Coolers / fans
- I/O cards / front panel / slot brackets
- Input / Output
- Installation / Maintenance
- Locks / tripods
- Mounts / accessories mobile devices
- Network infrastructure
- New Products
- Offers
- Outlet
- Photovoltaics / Solar
- Power / Energy / Light
- Shipping- / POS-material
- Signal control
- Smart Home
- Service Center
- Theme Worlds
- Windows-based setup program
- Web management, Telnet, HP-JetAdmin
- Supports DHCP (client)
- Supports Internet Printing Protocol (IPP)
- Supports SNMP
- Supports Firmware Upgrade (TFTP)
- Built-in Flash RAM
- Built-in SDRAM
- Quick Diagnostics LED
- Standards: IEEE 802.3 and 802.3u
- Chipset: StarTech STR8132 @ 200 MHz
- ARM9-based SoC
- Protocols: TCP / IP, IPX, Net BEUI, AppleTalk, LPR, RAW TCP, SMB over TCP / IP
- Supported Operating Systems: Windows 9x / Me, Windows NT / 2000 / XP / Vista / 7, Mac OS 8.1 or higher, UNIX / Linux, NetWare (Bindery / NDS)
- Connectors: 1x RJ-45 with 10 / 100Mbit / s, 1x USB 2.0 standard
- Flash RAM: 1MB, SDRAM: 8MB
- Power Supply: External Power Supply 5V / 2A
- Dimensions: 73.5 x 63 x 30mm, 60g
- Contents: manual, CD with software and multilingual manual
- Note: Host based printers like GDI, CAPT and PPA are currently not supported
remote network segments and is also ideal for connecting buildings. With the converter it is possible to connect optical networks over distances of up to 20km. This can be achieved by connecting both devices directly via fiber optics. System administrators can use the converters anywhere in the network without making changes to the existing cabling structure. The compact size allows the installation in any desktop environment.
- Singlemode TX 1310nm
- Complies with the standards IEEE802.3 10Base-T, IEEE802.3u 10/100Base-TX/X, IEEE802.1q, IEEE802.1p QoS, IEEE802.1d, IEEE802.3z, IEEE802 3ab
- Supports Auto MDI/MDI-X
- Auto Negotiation of Full and Half Duplex Mode
- 10/100/1000Base-T to 1000Base-T FX
- Status LEDs to indicate power supply, connection and activity of the ports
- Link Fault Pass Through (LFP) function for easier network maintenance
- External switching power supply 5V DC/1A
remote network segments and is also ideally suited for connecting buildings. With the converter it is possible to connect optical networks over distances of up to 20km. This can be achieved by connecting both devices directly via fibre optic cable. System administrators can use the converters anywhere in the network without making changes to the existing cabling structure. The compact size allows the installation in any desktop environment.
- Singlemode TX 1310nm
- Complies with the standards IEEE802.3 10Base-T, IEEE802.3u 10/100Base-TX/X, IEEE802.1q, IEEE802.1p QoS, IEEE802.1d, IEEE802.3z, IEEE802 3ab
- Supports Auto MDI/MDI-X
- Auto Negotiation of Full and Half Duplex Mode
- 10/100/1000Base-T to 1000Base-T FX
- Status LEDs to indicate power supply, connection and activity of the ports
- Link Fault Pass Through (LFP) function for easier network maintenance
- External switching power supply 5V DC/1A
remote network segments and is also ideally suited for connecting buildings. With the converter it is possible to connect optical networks over distances of up to 550m. This can be achieved by connecting both devices directly via fibre optics. System administrators can use the converters anywhere in the network without making changes to the existing cabling structure. The compact size allows installation in any desktop environment.
- Multimode TX 1310nm
- Complies with the standards IEEE802.3 10Base-T, IEEE802.3u 10/100Base-TX/X, IEEE802.1q, IEEE802.1p QoS, IEEE802.1d, IEEE802.3z, IEEE802. 3ab
- Supports Auto MDI/MDI-X
- Auto Negotiation of Full and Half Duplex Mode
- 10/100/1000Base-T to 1000Base-T FX
- Status LEDs to indicate power supply, connection and activity of the ports
- Link Fault Pass Through (LFP) function for easier network maintenance
- External switching power supply 5V DC/1A
remote network segments and is also ideally suited for connecting buildings. With the converter it is possible to connect optical networks over distances of up to 550m. This can be achieved by connecting both devices directly via fibre optics. System administrators can use the converters anywhere in the network without making changes to the existing cabling structure. The compact size allows installation in any desktop environment.
- Multimode TX 850nm
- Complies with the standards IEEE802.3 10Base-T, IEEE802.3u 10/100Base-TX/X, IEEE802.1q, IEEE802.1p QoS, IEEE802.1d, IEEE802.3z, IEEE802. 3ab
- Supports Auto MDI/MDI-X
- Auto Negotiation of Full and Half Duplex Mode
- 10/100/1000Base-T to 1000Base-T FX
- Status LEDs to indicate power supply, connection and activity of the ports
- Link Fault Pass Through (LFP) function for easier network maintenance
- External switching power supply 5V DC/1A
- Windows-based configuration
- Win8 32 / 64bit support
- Web interface for configuration and administration
- Supports SNMP
- Supports HP Web JetAdmin
- Supports Rendezvous
- Supports DHCP
- Supports E-mail alerting
- Supports Windows Monitor Printing Technology
- Supports Internet Printing Protocol (IPP)
- Supports print queue control / print job status
- Firmware update via TFTP
- Supported Operating Systems: Windows 95/98 / 98SE / ME / NT / W2K / XP, Mac OS 8.1 or higher,
- Linux / Unix, NetWare (Bindery / NDS)
- Standard: IEEE 802.3, IEEE 802.3u
- Chip: Winbond W90N740CD
- Flash Memory: 1MB
- System Memory: 2MB SDRAM
- LAN Interface: 1 x RJ-45 10/100Mbit/s, Auto-Sensing
- Printer Interface: Parallel Port DB 36-Pin Centronics male, Bi-directional
- Protocol: TCP/IP, IPX, NetBeui, Apple Talk, LPR, SMB u¨ber IP*
- Certified CE, FCC Class B
- Temperature 0° ~ 50°, Humidity 0% ~ 70%
- Dimensions 56x52x22mm, Weight 42g
- External power supply 3.3V / 2A
- Automatic MDI/MDI-X auto-negotiation
- LEDs for displaying the device status at a glance
- NWay support on RJ-45
- Small form factor
- Efficient media converter for easy network migration from copper to fiber
- Supports 10 Gb/s transmission rate for high network performance
- Link Fault Pass Through (LFP) function for easy maintenance
- Low power consumption and stable performance over long periods of time
- Plug-and-play solution for easy installation
The InLine® Network Media Converter enables cost-effective migration or expansion of existing networks by converting electrical copper signals into optical fiber signals. This allows networks with a range of up to 10 km to be connected via single-mode fiber optics.
Equipped with an integrated high-performance core, broadcast storm control and IEEE 802.3x flow control, this converter ensures a stable and reliable network connection. The integrated CRC error check optimizes signal quality and minimizes data loss. The media converter also offers a Link Fault Pass Through (LFP) function to facilitate maintenance work and detect network errors at an early stage.
The compact design with an RJ45 port for twisted pair connections and an SFP port for fiber optics makes the device flexible to use. Thanks to its low heat generation and low power consumption, the converter ensures long-lasting and interference-free operation.
Technical specifications:
- Supported transmission rates:
- Twisted Pair: 10/100/1000 Mb/s (10/100/1000Base-T), 2.5/5/10 Gb/s (2.5/5/10GBase-T)
- Fiber: 10 Gb/s (10GBase-R)
- Maximum transmission distance: 10 km (single-mode fiber)
- Wavelength: 1310nm
- UTP port: twisted pair RJ45 socket
- Fiber connection: SFP module port
- Status LEDs for connection monitoring
- Operating temperature: 0 °C to 55 °C
- Storage temperature: -40 °C to 70 °C
- Humidity: 5% - 80%, non-condensing
- Dimensions: approx. 94 x 93.3 x 26 mm (incl. mounting brackets)
- External plug-in power supply: 12 V DC/1 A
Scope of delivery:
- 1x InLine® network media converter with mounting brackets
- 1x plug-in power supply 12 V DC / 1 A
- 1x 4-pack of screws & wall plugs
- 1x instruction manual (German / English)
- Pre-installed SFP module
- Device DIPswitches permit various configurations
- Automatic MDI/MDI-X selection at RJ-45 port
- Auto-Negotiation, NWay support at RJ-45 port
- Link fault signalizing (LFS)
- Remote and local Loop Back Test
- LEDs for One Glanceö device status
- Bridges distances from 2km (Multi-Mode LWL) up to 60km (Single Mode LWL)
- Store-and-Forward with full cable speed
- Internal and external power supply options
- Weight: 158g
- Dimension: 86 x 133.5 x 29mm (W x D x H)
The converter’s compact size is suitable to place it in the outdoor IP camera enclosure. The embedded PoE supports to install and deploy IP camera more conveniently. Some space limitation areas are more suitable to install this device.
Media converter is an easy-to-setup and ready-to-use solution for PoE application system. Featuring Auto-MDI/MDIX and Auto-negotiation on copper port, the media converter automatically detects and configures the best mode of operation over a link. This eliminates the need for user setup or configuration procedure and simplifies installation, once installed these media converters operate automatically.
With surge and ESD protection, the IMC-563P provides a high level of immunity against electromagnetic interference and heavy electrical surges, thus facilitating easy deployment in demanding environments.Note: The Fiber and Copper port speed must be same for media converter to function.
Specifications:
- Standard: IEEE 802.3u 10/100Base-TX, IEEE 802.3ab 1000Base-T
IEEE 802.3z 1000Base-X
IEEE 802.3af PoE, IEEE 802.3at PoE+ - Connector: 1 x RJ-45 and 1 x SFP
- Max. Distance: UTP: 100 meters (Cat. 5/5e/6) / Fiber: SFP - up to 80km (single-mode)
- Workaround: Temperature -40 ~ 75°C / Humidity 5% ~ 95% (non-condensing)
- Unit LED: PWR: Illuminated for normal operation
ALM: Illuminated when failure occurs on fiber or copper link
LNK/ACT: Fiber link - Illuminated when receiving link pulses from compliant devices / - Flashing when data packets are being transmitted / received - Dimensions/Weight: 56 x 40 x 49mm (WxHxD) / 180g
- Power Input: 48~57V DC via terminal Block <36W
- MDI/MDI-X: Auto Selection
- Temperature: Operating: 0°C to 50°C / Storage: -20°C to 70°C
- Humidity: Operating: 10% to 90% RH / Storage: 5% to 90% RH
- Box contains: One Converter, Rubber Feet
- Efficient media converter for easy network migration from copper to fiber
- Supports 10 Gb/s transmission rate for high network performance
- Link Fault Pass Through (LFP) function for easy maintenance
- Low power consumption and stable performance over long periods of time
- Plug-and-play solution for easy installation
The InLine® Network Media Converter enables cost-effective migration or expansion of existing networks by converting electrical copper signals into optical fiber signals. This allows networks with a range of up to 300 m to be connected via multimode fiber optics.
Equipped with an integrated high-performance core, broadcast storm control and IEEE 802.3x flow control, this converter ensures a stable and reliable network connection. The integrated CRC error check optimizes signal quality and minimizes data loss. The media converter also offers a Link Fault Pass Through (LFP) function to facilitate maintenance work and detect network errors at an early stage.
The compact design with an RJ45 port for twisted pair connections and an SFP port for fiber optics makes the device flexible to use. Thanks to its low heat generation and low power consumption, the converter ensures long-lasting and interference-free operation.
Technical specifications:
- Supported transmission rates:
- Twisted Pair: 10/100/1000 Mb/s (10/100/1000Base-T), 2.5/5/10 Gb/s (2.5/5/10GBase-T)
- Fiber: 10 Gb/s (10GBase-R)
- Maximum transmission distance: 300 m (multimode fiber)
- Wavelength: 850nm
- UTP port: twisted pair RJ45 socket
- Fiber connection: SFP module port
- Status LEDs for connection monitoring
- Operating temperature: 0 °C to 55 °C
- Storage temperature: -40 °C to 70 °C
- Humidity: 5% - 80%, non-condensing
- Dimensions: approx. 94 x 93.3 x 26 mm (incl. mounting brackets)
- External plug-in power supply: 12 V DC/1 A
Scope of delivery:
- 1x InLine® network media converter with mounting brackets
- 1x plug-in power supply 12V DC / 1 A
- 1x 4-pack of screws & wall plugs
- 1x instruction manual (German / English)
- Pre-installed SFP module