InLine® RJ45 Keystone Jack Snap-In module Cat.6a
InLine® RJ45 Keystone Jack Snap-In module Cat.6a
- RJ45 port / LSA application, Keystone Snap-in, Cat.6a
- suited to 10Gbps
- for 19" Keystone patch panels and outlets
- with LSA bar
- fully shielded
- Diecast housing
- The snap-in modules fit into the support frame of the switch ranges of well-known manufacturers Gira, Merten, PEHA etc.
- Dimensions: W: 17.2mm x L: 40.4mm x H: 27.5mm
InLine® Keystone RJ45 socket / socket insert, SNAP-In
Snap-In or Keystone technology allows structured Lan networks to be realised using exactly the number of ports or inserts required. This solution therefore allows the use of holders from different manufacturers to better adapt to environmental requirements during installation. Snap-In modules fit into the support frame of socket outlets from well-known manufacturers such as Gira, Merten, PEHA (insert size: 14.6 x 19.4 mm)
- Feed-through Snap-In module
- 2x RJ45 female connectors (feed-through)
- Shielded STP
- Cat.6 compliant
- Configuration: 8/8 1:1
InLine® RJ45 plug for installation cable, field-attachable, shielded
Cat. 6A plug shielded for installation cable, field assembly. You can mount this plug on an existing Cat. 5e, Cat. 6, Cat. 6a or Cat. 7/7A installation cable with rigid cores. The RJ45 connector is designed for speeds up to 10 Gbps.
- metal housing
- Cover hood with cable bend protection made of plastic
- for solid wire AWG26/1, AWG24/1, AWG23/1
- for cable outside diameter of 6-9 mm
- service life > 750 mating cycles
- POE and PoE+ compatible
- suitable for 100 Mbps, 1 Gbps and 10 Gbps networks
- simple mounting possible due to LSA clamps
InLine® Cat.6A cable connector for installation cable, shielded, with LSA technology
Connection box, InLine®, Cat.6A, LSA, shielded, to connect two solid patch cord 8pin
- Suitable for solid material strands AWG 22-26
- For extension of solid installation cables
- Also suitable for repairing damaged installation cable
- Cat.6A shielded
- with strain relief by cable ties
- Colour coded LSA terminals
New
InLine® Keystone Mounting for DIN rail, x-port, metal
This bracket can be attached to a DIN rail. Due to its standardized dimensions, it is suitable for easy snap-in mounting of a Keystone module.
- Fits Keystone ports with 19 x 14.8 mm opening
- For mounting on 35 mm top-hat rails
- Arrangeable, width: 23mm
- Metal version
- Dimensions (TxHxB): approx. 48 x 51.2 x 23 mm
InLine® RJ45 Keystone Jack Snap-In module Cat.6a, with dust cover
- RJ45 Keystone Jack Snap-In module Cat.6a 500MHz
- compatible up to 10Gb/s
- Suitable for 19" empty patch panel and wall boxes for keystone applications
- with LSA mount
- full shielded
- Zinc alloy housing
- for cable 22AWG - 26AWG and OD 5.0-8.5mm
- W: 16.7mm, L: 37.8mm, H: 22.2mm
- Supports PoE, PoE+
- RJ45 Contacts durability: 750 cycles min
InLine® Pack of 10, Keystone SNAP-In blind cover for module slot
- Plastic slot cover, for clipping into an empty Keystone slot
- Can be used as a placeholder for subsequently inserted sockets
InLine® Keystone Mounting for DIN rail, 1-port, light grey
This Keystone holder can be mounted on a DIN rail. With its standardized dimensions, it is suitable for easy snap-in mounting of one Keystone module. Keystone modules up to max. 17.4 mm width can be used.
- One Keystone Port 19.2 x 14.9 mm
- Mounting for 35 mm DIN rail
- Stackable
- Integrated name plate
- Color: light grey
- Dimensions (TxHxW): 62.7 x 60 x 22 mm
InLine® Keystone RJ45 jack, SNAP-In, Cat.8.1
InLine® Keystone RJ45 jack, SNAP-In, Cat.8.1
- RJ45 Keystone Jack Snap-In module Cat.8.1 2000MHz
- compatible up to 40Gb/s (40GBASE-T)
- Suitable for 19" empty patch panel and wall boxes for keystone applications
- with LSA mount
- full shielded
- Zinc alloy housing
- for cable 22AWG - 24AWG and OD 5.0-8.5mm
- W: 15.8mm, L: 37.9mm, H: 22.2mm
- Supports PoE, PoE+
- RJ45 Contacts durability: 750 cycles min
InLine® connection module for installation cable, with LSA technology, shielded
InLine® connection module for installation cableThis InLine® connection module for installation cable allows two rigid Lan network cable strands/lines to be connected together safely and professionally without the risk of creating disturbance and interference in data transmission thanks to the internal LSA technology module.
- Rigid Lan network cable coupler
- Supports cables from AWG22 to AWG26
- Complies with Cat.5e specifications up to 100Mhz
- Internal 2x LSA connectors
- Internal LSA module connection board
- Material metallised plastic
- Dimensions 63x35x23mm
- STP shielded
InLine® Keystone RJ45 jack slim, SNAP-In, Cat.6A, integrated cable tie
- RJ45 socket, Keystone SNAP-In module, Cat.6 a 500MHz
- suitable up to 10GBit/s
- for 19" empty panel and junction boxes
- with LSA strip
- Fully shielded
- Die-cast housing
- Suitable for rigid installation cables AWG 22-26 and outer diameter 6.0-8.5mm
- Width 14.5mm, length 31.5mm, height 19.4mm (cut-out height: 16mm)
- Supports PoE, PoE+
- Designed for 750 mating cycles
- An integrated cable clip on the cable side facilitates installation
InLine® Cat.6A Keystone SNAP-In module for top-hat rai
Optimize your network cabling with the InLine® module holder with Cat.6A Keystone, specially designed for mounting on top-hat rails. This shielded keystone module enables high-performance and reliable data transmission at up to 10 Gbit/s, ideal for professional network environments.
- High speed: Cat.6A keystone module with up to 10 Gbit/s
- Stable mounting: Robust module holder for secure hold on top-hat rails
- Easy installation: Keystone module can be mounted without tools
- Effective shielding: Protection against electromagnetic interference (EMI)
- Space-saving: Compact design, ideal for narrow network cabinets
The InLine® Cat.6A Keystone SNAP-In module was developed for professional applications and offers a high-performance solution for structured cabling. The robust module holder enables simple and stable installation on standard DIN rails and ensures a secure connection in control cabinet or industrial environments. Thanks to the high-quality shielding, the signal is protected from electromagnetic interference (EMI) to ensure reliable network performance.
Installation is particularly user-friendly: the Keystone module can be inserted into the module holder quickly and without tools. The module supports a wide range of installation and patch cables (AWG26/1 to AWG22/1 and AWG26/7 to AWG22/7) with a cable diameter of 6-8.5 mm. The high-quality plastic and cast metal housing ensures durability and stability.
Technical specifications:
- Keystone module: Cat.6A
- Data rate: Up to 10 Gbit/s
- Shielding: Yes
- Material: Plastic, cast metal
- Color: Grey / metal
- Compatible with: Standard top-hat rails
InLine® Keystone SNAP-In Fiber Keystone module holder, 1-port for DIN rail
This Keystone holder can be mounted on a DIN rail. With its standardized dimensions, it is suitable for easy snap-in mounting of one Keystone module. Keystone modules up to max. 17.4 mm width can be used.
- One Keystone Port 19.2 x 14.9 mm
- Mounting for 35 mm DIN rail
- Stackable
- Integrated name plate
- Color: light grey
- Dimensions (DxHxW): 62.7 x 60 x 22 mm
InLine® Keystone RJ45 jack slim, SNAP-In, Cat.8.1, integrated cable tie
- RJ45 socket, Keystone SNAP-In module, Cat.8.1 2000MHz
- suitable up to 10GBit/s
- for 19" empty panel and junction boxes
- with LSA strip
- Fully shielded
- Die-cast housing
- Suitable for rigid installation cables AWG 22-26 and outer diameter 6.0-8.5mm
- Width 14.5mm, length 31.8mm, height 19.4mm (cut-out height: 16mm)
- Supports PoE, PoE+
- Designed for 750 mating cycles
- An integrated cable clip on the cable side facilitates installation
InLine® Keystone RJ45 jack, shielded, Cat.6A, coloured 8-pack
Cat.6A keystone with coloured front for easy identification in the network cabinet, 8 pieces in a PU.
- RJ45 socket with LSA insert, Keystone SNAP-In, Cat.6a 500MHz
- suitable up to 10GBit/s
- for 19" empty panel and junction boxes
- with LSA strip
- fully shielded
- die-cast housing, zinc plated
- for cable AWG 22- 24 and outer diameter up to 9.5mm
- Width 16.5mm, length 39.5mm, height 21.6mm (snap-in cut-out: height: 16.7mm x width: 14.5mm)
- Supports PoE, PoE+
- Designed for 750 mating cycles
InLine® RJ45 plug Cat.6A 500MHz, field-assembly, shielded, with screw cap
Cat.6A shielded plug for installation cables, field-assembly. This plug can be mounted on an existing Cat.5e, Cat.6, Cat.6a or Cat.7/7A installation cable with rigid wires or patch cable with flexible multi-wire conductors. The RJ45 plug is designed for speeds of up to 10 Gb/s.
- Housing made of metal, zinc alloy
- Cable bend protection made of plastic
- For solid wire AWG26/1 to AWG22/1 (inner diameter 0.4 mm to 0.65 mm) and flexible cores AWG26/7 to AWG 22/7 (inner diameter 1.1 mm to 1.6 mm)
- for cable outer diameters of 6 mm to 8.5 mm< li>Durability > 750 mating cycles
- POE and PoE+/++ suitable
- for 100 Mb/s, 1 Gb/s and 10 Gb/s networks suitable
- easy assembly possible due to LSA clamps
InLine® Keystone SNAP-In Module holder, single, metal, for flat surfaces
InLine® module holder to hold 1x Keystone module or adapter, suitable e.g. for InLine® 76202A, etc.
- Housing material: Zinc die-cast
- Universally applicable on any straight surface, housing rear panels, cable ducts or wood/metal panels
- Straight outlet: 0°
- Assembly cut: 23 x 17.5mm, hole diameter: 3.1mm, hole spacing: 28.9mm
- Dimensions: Length: 35.5mm, width: 19.1mm, height: 9.8mm
- Content of delivery: Mounting frame 1-port (without modules), 2x mounting screws, panhead screw M3x12mm
24pcs. Bulk-Pack InLine® Keystone RJ45 jack slim, Cat.6A, integrated cable tie
InLine Bulk ecoPacks are environmentally friendly bulk packaging in which the items are only packed in a PE bag to protect against moisture and in a uniform box. The packaging unit varies depending on the item size for optimal utilization. InLine Bulk ecoPacks are particularly suitable for direct use, e.g. B. for your own use or for installation at the customer's site. You get the proven InLine quality with minimal packaging. This saves time and money and protects the environment.
- More economical: quick unpacking saves you time
Ideal for use by customers - More environmentally friendly: Less packaging (small waste)
The cables are packed together in a PE bag to protect against moisture. Individual slip bags are no longer needed. - More economical:
The packaging is based on the optimal utilization of the carton capacity. Resources are optimally used and utilized. - Cheaper: price advantage through bulk purchase
5% below the individual/normal price
You will receive 24 pieces of item B-76202P packed in a plastic bag to protect against moisture and an outer box.
- RJ45 socket , Keystone SNAP-In module, Cat.6a 500MHz
- suitable up to 10GBit/s
- for 19" empty sheet metal and junction boxes
- with LSA strip
- Fully shielded
- Die-cast housing
- Suitable for rigid installation cables AWG 22-26 and outer diameter 6.0-8.5mm
- Width 14.5mm, Length 31.5mm, height 19.4mm (cutout height: 16mm)
- Supports PoE, PoE+
- Designed for 750 mating cycles
- An integrated cable clip on the cable side makes installation easier
24 bulk pack InLine® Keystone RJ45 jack slim, Cat.8.1, integrated cable tie
InLine Bulk ecoPacks are environmentally friendly bulk packaging in which the items are only packed in a PE bag to protect against moisture and in a uniform box. The packaging unit varies depending on the item size for optimal utilization. InLine Bulk ecoPacks are particularly suitable for direct use, e.g. B. for your own use or for installation at the customer's site. You get the proven InLine quality with minimal packaging. This saves time and money and protects the environment.
- More economical: quick unpacking saves you time
Ideal for use by customers - More environmentally friendly: Less packaging (small waste)
The cables are packed together in a PE bag to protect against moisture. Individual slip bags are no longer needed. - More economical:
The packaging is based on the optimal utilization of the carton capacity. Resources are optimally used and utilized. - Cheaper: price advantage through bulk purchase
5% below the individual/normal price
You will receive 24 pieces of item B-76202Q packed in a plastic bag to protect against moisture and an outer box.
- RJ45 socket , Keystone SNAP-In module, Cat.8.1 2000MHz
- suitable up to 10Gbit/s
- for 19" empty sheet metal and junction boxes
- with LSA strip
- Fully shielded
- Die-cast housing
- Suitable for rigid installation cables AWG 22-26 and outer diameter 6.0-8.5mm
- Width 14.5mm, Length 31.8mm, height 19.4mm (cutout height: 16mm)
- Supports PoE, PoE+
- Designed for 750 mating cycles
- An integrated cable clip on the cable side makes installation easier
InLine® Keystone RJ45 jack/socket, unshielded, Cat.6A, pack of 8
Cat.6A Keystone RJ45 female/female plastic connector with coloured front for easy identification in the network cabinet, 8 pieces in a PU.
- RJ45 female to RJ45 female, Keystone SNAP-In, UTP Cat.6a 500MHz
- suitable up to 10Gb/s
- for 19" empty panel and junction boxes
- 1:1 pin assignment (8P8C)
- UTP unshielded
- Plastic housing, coloured
- suitable for patch cables, LAN cables, network cables, modular cables, ISDN telephone cables
- Width 14.4mm, length 30mm, height 20.55mm (snap-in cut-out: height: 16.7mm x width: 14.5mm)
