Triton RAC-CH-X25-X1 Ventilation
Ventilation and heat dissipation units for wall-mounted 19’ Rack cabinets that can be installed at the top (ceiling).
- Fans: 2x capacity 160m³/h
- Power supply In: 240V/30W, 50/60Hz
- Red backlit On/Off switch
- Bimetal thermostat - switching temperature range adjustable from 0°C to +60°C
- Supplied with: 4x screw M6x16, 4x plastic washer, 4x cage nuts
Triton RAC-CH-X05-X3 19" ventilation unit for roof/floor
Ventilation and heat dissipation units for floor-standing Rack 19’ cabinets that can be installed on the top ( ceiling). By means of specific frame (optional) they can be mounted either on the side or on the floor ( base).
- Fans: 6x capacity 160m³/h
- Power supply In: 240V/90W, 50/60Hz
- Red backlit On/Off switch
- Bimetal thermostat - switching temperature range adjustable from 0°C to +60°C
Triton RAx-CH-X04-X3 19" ventilation unit for roof/floor
These fan units are made especially for free-standing cabinets. They are installed as required into the base, top cover or door of the cabinet ( permeability 350 x 420 mm ). A fan unit for free-standing cabinets – it is installed into the top cover from outside of the cabinet, into the bottom from inside of the cabinet. It is necessary to use the installation frame of the bottom fan unit when installing into the base of the cabinet – RAx-CH-XXX-X1 which is mounted using a two-sided gluing tape.
We recommend to use a plinth under the cabinet to intake an air.
We recommend to use a plinth under the cabinet to intake an air.
- Extension of temperatures adjustment: bimetallic thermostat
- Specified voltage(V/Hz): 230/50-60
Triton RAC-CH-X01-A1 19" horizontal ventilation unit 2U, 2 fans, grey
These fan sheets were specially developed for the free-standing distributors. Depending on requirements, they are installed in the floor, in the roof or in the door of the distributor. The fan plate for free-standing distributors is inserted in the roof from the outside and in the floor from the inside. A mounting frame, RAx-CHXXX-X1, is required for floor mounting, which is attached with double-sided adhesive tape. Horizontal 19" ventilation unit, 2 fans, 2U, 220 V / 30 W, thermostat. RAC-CH-X01-A1. ACCESSORY:
- 4pcs. Screws M6 x 10
- 4pcs. Plastic washers
- 4 pieces cage nuts M6
Triton RAx-CH-X03-X3 19" ventilating unit for roof/bottom
Ventilation and heat dissipation units for floor-standing Rack 19’ cabinets that can be installed on the top (ceiling). By means of specific frame (optional) they can be mounted either on the side or on the floor (base).
- Fans: 2x capacity 160m³/h
- Power supply In: 240V/30W, 50/60Hz
- Red backlit On/Off switch
- Bimetal thermostat - switching temperature range adjustable from 0°C to +60°C
Triton RAC-CH-X02-A1 19" ventilating unit
Horizontally mounted ventilation and heat dissipation unit for 19’ cabinets.
- Fans: 4x capacity 160m³/h
- Power supply: 240V/60W, 50/60Hz
- Height: 2U (rack unit)
- Red backlit On/Off switch
- Bimetal thermostat - switching temperature range adjustable from 0°C to +60°C
- Supplied with: 4x M6x16 screw, 4x plastic washer, 4x cage nuts
Triton RAC-CH-X26-X1 Ventilation unit for RBA-xxx-A6, 3 fans, grey
Ventilation unit TRITON RAC-CH-X26-X1, for RBA-xxx-A6 with three fans (160m3/h each), 240V, 50/60Hz & thermostat
Supplementary pack: 4x M6x10 screws, 40x plastic washers, 4x M6 cage nuts
Supplementary pack: 4x M6x10 screws, 40x plastic washers, 4x M6 cage nuts
