InLine® RJ45 Keystone Jack Snap-In module Cat.6a
InLine® RJ45 Keystone Jack Snap-In module Cat.6a
- RJ45 port / LSA application, Keystone Snap-in, Cat.6a
- suited to 10Gbps
- for 19" Keystone patch panels and outlets
- with LSA bar
- fully shielded
- Diecast housing
- The snap-in modules fit into the support frame of the switch ranges of well-known manufacturers Gira, Merten, PEHA etc.
- Dimensions: W: 17.2mm x L: 40.4mm x H: 27.5mm
InLine® Keystone RJ45 socket / socket insert, SNAP-In
Snap-In or Keystone technology allows structured Lan networks to be realised using exactly the number of ports or inserts required. This solution therefore allows the use of holders from different manufacturers to better adapt to environmental requirements during installation. Snap-In modules fit into the support frame of socket outlets from well-known manufacturers such as Gira, Merten, PEHA (insert size: 14.6 x 19.4 mm)
- Feed-through Snap-In module
- 2x RJ45 female connectors (feed-through)
- Shielded STP
- Cat.6 compliant
- Configuration: 8/8 1:1
InLine® RJ45 plug for installation cable, field-attachable, shielded
Cat. 6A plug shielded for installation cable, field assembly. You can mount this plug on an existing Cat. 5e, Cat. 6, Cat. 6a or Cat. 7/7A installation cable with rigid cores. The RJ45 connector is designed for speeds up to 10 Gbps.
- metal housing
- Cover hood with cable bend protection made of plastic
- for solid wire AWG26/1, AWG24/1, AWG23/1
- for cable outside diameter of 6-9 mm
- service life > 750 mating cycles
- POE and PoE+ compatible
- suitable for 100 Mbps, 1 Gbps and 10 Gbps networks
- simple mounting possible due to LSA clamps
InLine® Cat.6A cable connector for installation cable, shielded, with LSA technology
Connection box, InLine®, Cat.6A, LSA, shielded, to connect two solid patch cord 8pin
- Suitable for solid material strands AWG 22-26
- For extension of solid installation cables
- Also suitable for repairing damaged installation cable
- Cat.6A shielded
- with strain relief by cable ties
- Colour coded LSA terminals
InLine® Keystone Mounting for DIN rail, x-port, metal
This bracket can be attached to a DIN rail. Due to its standardized dimensions, it is suitable for easy snap-in mounting of a Keystone module.
- Fits Keystone ports with 19 x 14.8 mm opening
- For mounting on 35 mm top-hat rails
- Arrangeable, width: 23mm
- Metal version
- Dimensions (TxHxB): approx. 48 x 51.2 x 23 mm
InLine® Frame set for 1x RJ45 Bu/LSA insert, Keystone SNAP-In, white RAL9010
Frame set for RJ45 Bu/LSA inset, Keystone SNAP-In, RAL9010, pure white
- for housing modules
- Fixing frame with 80x80mm cover + central plate 50x50mm
- with dust protection flaps
- w/o modules
Item no.:
76201Y
Available immediately, delivery time 1-2 working days.
Only 501 left in stock. If you have any queries, please contact the sales department.
InLine® Wall Plate Cat.6A surface mount 2x RJ45 female RAL9010 white, horizontal
The Cat. 6A connection box with 2x RJ45 sockets is surface-mounted or flush-mounted and has two LSA connection strips with 8 insulation displacement connectors each. The junction box is completely shielded.
- Cat. 6A surface-mounted junction box
- 2x RJ45 sockets, 2x 8pin LSA insulation displacement connectors
- Cable entry 76842S: vertical, 76842W: horizontal
- Completely shielded
- Colour: white RAL9010
Item no.:
76842W
Available immediately, delivery time 1-2 working days.
Only 625 left in stock. If you have any queries, please contact the sales department.
InLine® RJ45 Keystone Jack Snap-In module Cat.6a, with dust cover
- RJ45 Keystone Jack Snap-In module Cat.6a 500MHz
- compatible up to 10Gb/s
- Suitable for 19" empty patch panel and wall boxes for keystone applications
- with LSA mount
- full shielded
- Zinc alloy housing
- for cable 22AWG - 26AWG and OD 5.0-8.5mm
- W: 16.7mm, L: 37.8mm, H: 22.2mm
- Supports PoE, PoE+
- RJ45 Contacts durability: 750 cycles min
InLine® Frame set for 2x RJ45 Bu/LSA inset, Keystone SNAP-In, RAL9010
With snap-in or keystone technology, structured Lan networks can be realised with exactly the number of ports or inserts that are required. This solution therefore enables the use of carriers from different manufacturers in order to better adapt to the environmental requirements during installation. The universality of this product is guaranteed by the anchoring system of the snap-in connector or insert, also known as Keystone.
- Frame set for 2x RJ45 Bu/LSA insert, Keystone SNAP-In, white RAL9010
- Mounting frame with 80x80mm cover + 50x50mm centre plate
- For mounting modules
- With dust protection caps
- Without modules
Item no.:
76201R
Available immediately, delivery time 1-2 working days.
Only 810 left in stock. If you have any queries, please contact the sales department.
InLine® 19" blind panels, RAL 9005 black
The 19" blind panel fills free gaps in the 19" cabinet, allowing for an orderly structure
- 19" blind panel
- Material: 1mm SPCC steel
- Colour: Black RAL 9005
InLine® Cage nuts set M6, cage nuts, washers, screws
Cage nut set for installing 19’ network devices in the enclosure. The cage nuts are clamped into the square openings of the latching rails according to the U of the device. The set consists of
- 20x M6 cage nuts
- 20x M6 plastic washers
- 20x pan-head screw M6x16mm
InLine® 19" Cable entry plate with brush, 1U
19" cable entry panel with brush insert, for structured cabling in the server enclosure
- 19" entry panel
- brush insert black, opening approx. 390x30mm
- Height 1U
InLine® Keystone Mounting for DIN rail, 1-port, light grey
This Keystone holder can be mounted on a DIN rail. With its standardized dimensions, it is suitable for easy snap-in mounting of one Keystone module. Keystone modules up to max. 17.4 mm width can be used.
- One Keystone Port 19.2 x 14.9 mm
- Mounting for 35 mm DIN rail
- Stackable
- Integrated name plate
- Color: light grey
- Dimensions (TxHxW): 62.7 x 60 x 22 mm
Item no.:
76203
Available immediately, delivery time 1-2 working days.
Only 567 left in stock. If you have any queries, please contact the sales department.
InLine® connection module for installation cable, with LSA technology, shielded
InLine® connection module for installation cableThis InLine® connection module for installation cable allows two rigid Lan network cable strands/lines to be connected together safely and professionally without the risk of creating disturbance and interference in data transmission thanks to the internal LSA technology module.
- Rigid Lan network cable coupler
- Supports cables from AWG22 to AWG26
- Complies with Cat.5e specifications up to 100Mhz
- Internal 2x LSA connectors
- Internal LSA module connection board
- Material metallised plastic
- Dimensions 63x35x23mm
- STP shielded
InLine® Surface Mount Box for keystone 2x RJ45, white
Two RJ45 keystone / snap-in modules can be conveniently integrated into this wall-mounted box. The socket can be screwed to the wall, etc., and allows easy installation of network cables.
- Connection box for 2x Keystone RJ45 sockets
- suitable for InLine® 76202A
- Color: White
- Dimension: 50x50x30mm
Item no.:
76202B
Available immediately, delivery time 1-2 working days.
Only 460 left in stock. If you have any queries, please contact the sales department.
InLine® Pack of 10, Keystone SNAP-In blind cover for module slot
- Plastic slot cover, for clipping into an empty Keystone slot
- Can be used as a placeholder for subsequently inserted sockets
InLine® Keystone RJ45 jack, SNAP-In, Cat.8.1
InLine® Keystone RJ45 jack, SNAP-In, Cat.8.1
- RJ45 Keystone Jack Snap-In module Cat.8.1 2000MHz
- compatible up to 40Gb/s (40GBASE-T)
- Suitable for 19" empty patch panel and wall boxes for keystone applications
- with LSA mount
- full shielded
- Zinc alloy housing
- for cable 22AWG - 24AWG and OD 5.0-8.5mm
- W: 15.8mm, L: 37.9mm, H: 22.2mm
- Supports PoE, PoE+
- RJ45 Contacts durability: 750 cycles min
InLine® Cable bracket, metal, 43x70mm black
- For orderly and neat cable management
- Material: black lacquered steel RAL9005
- Bracket thickness: 2mm
- incl. M6 screw set
Item no.:
19110S
Available immediately, delivery time 1-2 working days.
Only 528 left in stock. If you have any queries, please contact the sales department.
InLine® Cat.6A box flush-mounted 2x RJ45 white RAL9010
InLine® Cat.6A box flush-mount, 2x RJ45 Keystone, white RAL9010
- Modular Cat.6a flush box, consisting two Cat.6A modules (Snap-In, Keystone) and a 80mm front panel in RAL9010
- all requirements of the new Cat. Class 6A (500MHz) to ANI / TIA / EIA 568B.2-10
- up to 10Gbps compatible
- 45° outlet with dust cover
- fits 50mm box
- easy to mount, it is no LSA tool required
- color-coded by TIA568B, and numerical codes based EN50173
- fully shielded diecast
- central disk with integrated dust caps
- suitable for flush mounting
- assembly instructions included (German / illustrated)
- for AWG 22-26 solid patch cable
Item no.:
76832A
Available immediately, delivery time 1-2 working days.
Only 289 left in stock. If you have any queries, please contact the sales department.
InLine® Gigabit network switch 5-port, 1Gb/s, desktop, metal housing, fanless
The switch has pre-punched holes on the underside so that it can be hung on the wall
Specification:Standards and protocols:
- IEEE802.3i 10Base-T
- IEEE802.3u 100Base-TX
- IEEE802.3ab 1000Base-T
- CSMA/CD
- TCP/IP
- 5x 10/100/1000 Mb/s Auto-Negotiation ports
- MAC Address Auto-Learning and Auto-Updating
- IEEE802.3x flow control for Full Duplex mode and Backpressure for Half Duplex mode
- Backbone bandwidth: 1 Gb/s
- MAC Address Table: 4K
- Forwarding rate: 1000Base-T: 1488000pps/Port
- Transmission method: Store-and-forward
- Ports: 5x 10/100/1000Mb/s Auto-Negotiation RJ45 ports (Auto MDI/MDIX)
- 10Base-T: UTP cable Cat. 3, 4, 5 (max. 100 meter)
- 100Base-TX: UTP cable Cat. 5, 5e or higher (max. 100 Meter)
- 1000Base-T: UTP cable Cat. 5, 5e or higher (max. 100 Meter)
- Operating temperature: 0°C ~ 60°C
- Storage temperature: -10°C ~ 70°C
- Humidity in operation: 10% ~ 90% non-condensing
- Storage humidity 5% ~ 90% non-condensing
- Power (red)
- Link/Act
- 1000M (blue)
Weight: approx. 154g
Content of delivery:
- 1x switch
- 1x user manual GE/EN
- 1x external power supply 5.0V / 1.0A
- 4x rubber feet
Item no.:
32305O
Available immediately, delivery time 1-2 working days.
Only 643 left in stock. If you have any queries, please contact the sales department.
InLine® 10" blind plate, 1U
The 10" blind panel fills empty gaps in the 10" cabinet, allowing for an orderly structure
- 10" blind panel
- Material: 1mm SPCC steel
InLine® Cat.6A wall outlet box, surface or flush mount, 2x RJ45 socket, vertical
The Cat. 6A connection box with 2x RJ45 sockets is surface-mounted or flush-mounted and has two LSA connection strips with 8 insulation displacement connectors each. The junction box is completely shielded.
- Cat. 6A surface-mounted junction box
- 2x RJ45 sockets, 2x 8pin LSA insulation displacement connectors
- Cable entry 76842S: vertical, 76842W: horizontal
- Completely shielded
- Colour: white RAL9010
Item no.:
76842S
Available immediately, delivery time 1-2 working days.
Only 1774 left in stock. If you have any queries, please contact the sales department.
InLine® Cat.6 Wall Outlet Box surface or concealed mount 2x RJ45
Cat. 6 connection box with 2x RJ45 sockets is surface- or flush-mounted, possessing two LSA connection strips with 8 clamping plates each. Connection box is completely shielded.
- Cat. 6 connection box, surface mounted
- 2x RJ45 sockets, 2x 8pin LSA clamping plates
- Completely shielded
- Color: signal white, RAL 9010
InLine® 19" Cable management panel, 5 small brackets
- Size: 19", 1 U
- Material: metal
- With 5 metal brackets, one-piece structure
- Depth of brackets: 60mm
- Material thickness: 1.5mm
