InLine® PC and Server Mainboard Testing Set 5 parts
Simple set for testing of mainboards, without using the long cables from the casing. The set consists of 2 pushbuttons, 2 LED's and 1 speaker, which are connected directly to the post connectors of the mainboard.
- 1x Power pushbutton
- 1x Reset-pushbutton
- 1x Power LED
- 1x HDD LED
- 1x PC-speaker
InLine® Voltage Tester 200 - 250 Volts
Voltage tester helps detect DC voltages between 200-250 volt. Display via small glow lamp in handle.
- Shaft length ca. 60mm
- Isolated shaft
- Pocket clip
- 3.0 X 60 mm
InLine® Reflective Marker Tapes for Digital rpm-Meter
Replacement adhesive strips for InLine® Digital Tachometer (Manufacturer number 43111). The tape reflects the laser beam of the measuring device. Please note: The delivery of the tachometer Reflector includes the strips already.
InLine® Digital Multimeter, with temperature sensor
The meter is a digital hand-held multimeters with 3.5-digit LCD display for measuring DC and AC voltage, DC current, resistance, diodes, transistors, temperature and continuity test.
- DC voltage measurement: 1mV-600V
- AC voltage measurement: 0.1V-600V (40-400Hz)
- Measuring DC current: 1µA-10A
- Resistance: 0.1 Ohms to 2 MOhms
- Temperature measurement: -20 to 1000°C, enclosed temperature sensor with 1m cable
- Low battery display
- Operating temperature: 0 to 40°C
- 3.5-digit display
- Power supply: 9V battery
- Dimensions: 138 x 68 x 31mm
- Weight: 170g
InLine® battery tester with LCD display, for round and button cell batteries
With the InLine® Universal Battery Tester you can test the charge state of all standard batteries as well as rechargeable battery packs. Over 12 different battery types can be tested. The capacity state of the battery is displayed on the LCD indicator after inserting the battery in the suitable slot.
- Compact battery tester
- With LCD display
- For battery types: AAA, AA, C, D, 9V, Lady N (LR1), CR123A, CR2, CR-V3, 2CR5, CR-P2 and button cells and more
- Battery charge-state indicator in 3 goups of 5/5/8 bars (weak, normal, good)
- Power supply: 1x Micro AAA battery (not included)
InLine® Tester for RJ45 Cables and Connectors with 9 control LEDs
Tester for patch cable Twisted-Pair and ISDN/phone cabling, cable and Installation. Displays each wire and shield with 9 LEDs. Ready installed electrical networks may be tested on throughput, assignment, function and shielding. Contents include remote adapter. Requires one 9V battery.
InLine® Online PoE / PoE+ tester Live-Test
The PoE Tester is suitable for testing the PoE / PoE + connections to IEEE 802.3af and IEEE 802.3at compliant with a voltage of 37-57V for. Other standards as Telephone / ISDN voltages are not supported. Connect the RJ45 connector of the PoE tester using the supplied short cable, the other end of the cable to the test RJ45 port. The following display options are available:
1. The LED lights Endspan: There is a PoE voltage via pin 1,2,3,6 in Endspan mode to the socket.
2. The LED lights Miadspan: There is a PoE voltage via pin 4,5,7,8 in Midspan mode to the socket.
3. No LED lights up: The tested RJ45 connector does not have PoE voltage.
1. The LED lights Endspan: There is a PoE voltage via pin 1,2,3,6 in Endspan mode to the socket.
2. The LED lights Miadspan: There is a PoE voltage via pin 4,5,7,8 in Midspan mode to the socket.
3. No LED lights up: The tested RJ45 connector does not have PoE voltage.
- Technical specifications: Operating voltage: 24V-60V AC / DC
- Operating Current: <10mA
- Insulation voltage:> 1500V AC
InLine® PoE / PoE+ tester
The PoE Tester is suitable for testing the PoE / PoE + connections to IEEE 802.3af and IEEE 802.3at compliant with a voltage of 37-57V for. Other standards as Telephone / ISDN voltages are not supported. Connect the RJ45 connector of the PoE tester using the supplied short cable, the other end of the cable to the test RJ45 port. The following display options are available: 1. The LED lights Endspan: There is a PoE voltage via pin 1,2,3,6 in Endspan mode to the socket. 2. The LED lights Miadspan: There is a PoE voltage via pin 4,5,7,8 in Midspan mode to the socket. 3. No LED lights up: The tested RJ45 connector does not have PoE voltage.
- Technical specifications: Operating voltage: 24V-60V AC / DC
- Operating Current: <10mA
- Insulation voltage:> 1500V AC
InLine® Multimeter Dual-Display, with PC connection via USB, CAT III / CAT IV
Multimeter with dual display, for measuring voltage, current, resistance, capacitance, frequency, continuity test, temperature. Digital multimeter with PC connection for recording and logging of measured values. This device complies with IEC 61010-1:2001, CAT III 1000V and CAT IV 600V overvoltage standards. The dual-display display shows the measured values digitally in digits and analogue as a bargraph, e.g. to better display fluctuations in the measurement.
- Display: 2x 4 digits, resolution 6600 + bargraph
- connect to the PC via USB port (Windows software)
- True RMS measurement (effective value measurement)
- Relative measurement
- Automatic switch-off
- Hold data
- LED backlight
- Auto / manual range selection
- Low power display
- Diode / continuity test
- Measuring ranges / tolerances:
- Direct voltage (DC): 660mV/±0.5%, 6.6V/66V/660V/±0.8%, 1000V/±1.0%
- AC voltage (AC): 660mV/6.6V/66V/660V/±1.0%, 1000V/±1.5%
- Direct current (DC): 660µA/6000µA/±1%, 66mA/600mA±1.5%, 10A/±1.8%
- Alternating current (AC): 660µA/6000µA/±1.5%, 66mA/600mA±1.8%, 10A/±2
- Widerstand: 660Ohm/6,6KOhm/66KOhm/660KOhm/6,6MOhm/±1,2%, 66MOhm/±2%
- capacitance: 6.6nF/±5.0%, 66nF/660nF/6.6µF/±3.0%, 66µF/660µF/3.3mF/±5.0%, 66mF/>±5.0%
- Logic frequency: 6Hz~66MHz ±(0.1% +3)
- Power frequency: 6Hz~66kHz ±(0.05% +8)
- Duty cycle: 1% ~ 99%
- Temperature: -55°C ~ 0°C/± 5.0%, 1°C ~ 1000°C± 2.0%
- Requires 1x 9V block (included)
- Dimensions: 195x90x50mm, weight: ca.500g
- Package contents: Multimeter, test strips, USB connection cable with coupler, temperature sensor, 9V battery, software CD
InLine® Multifunction battery tester, measuring device with LCD display
With the InLine® Universal Battery Tester you can test the charge state of standard batteries as well as rechargeable battery packs. Over 12 different battery types can be tested. The capacity state of the battery is displayed on the LCD indicator after inserting the battery in the suitable slot.
- Compact battery tester
- With LCD display
- For battery types: AAA, AA, C, D, 9V, Lady N (LR1), CR123A, CR2, CR-V3, 2CR5, CR-P2 and button cells and more
- Battery charge-state indicator in 3 goups of 5/5/8 bars (weak, normal, good)
- Power supply: 1x Micro AAA battery (not included)
InLine® USB Smart Control, Multimeter, charge monitoring
The InLine® USB SmartControl Multimeter combines overheating-,
overcurrent- and overvoltage- protection as well as timer and a capacity counter in one device.The following control indicators can be selected one by one at the push of a button:
overcurrent- and overvoltage- protection as well as timer and a capacity counter in one device.The following control indicators can be selected one by one at the push of a button:
- Overall safety status
- Overheating protection
- Overcurrent protection
- Overvoltage protection
- Capacity counter
- Previous Charge (displays the mAh of the previous charging process)
- In addition, a timer can be set for how long a charging operation shall last and then be terminated automatically. The choice is 2, 4, 6, 8, 10 hours
- Length: 1m
- Weight: 43g
- Voltage: From 4.5 to 20V
- Current: From 0 to 2.5A
- Power consumption: 40mW
- Scope of delivery: InLine® USB Smart Control, user manual
InLine® Network Cable Tester for BNC RJ11 RJ45
This passive tester for Ethernet Lan networks and telephone systems is ideal for testing the function, shielding and wiring of RJ45, RJ11, ISDN, UTP, STP and BNC cables. Coaxial cables should be tested with a BNC adapter (50ohm). The tester can be set to automatic and manual function and the values are displayed via a 9-LED light bar.
- Passive Ethernet Tester
- Compatible: EIA/TIA 356/568/568B/Token Ring
- Main device connections 2x RJ45 female.
- Remote unit device connections 1x RJ45 female.
- Power supply 9V alkaline battery
- Tester dimensions 103x60x26mm, 103x30x26mm
- Tester weight 120g + 40g
- Supplied with leatherette case and adapters
InLine® Voltage Tester up to 380 Volt
InLine® Voltage Tester up to 380 Volt
- Voltage tester up to 380 Volt
- With voltage and polarity display
- Voltage range: 6-400V AC
- Display elements: 6-12-24-50-110-220-380V LED
- Frequency range: 50-500 Hz
InLine® Digital Multimeter with USB to PC data transfer and RMS measurement
Digital Multimeter with PC interface for capturing and logging of measured values. This device complies with IEC 61010-1:2001, CAT III 1000V and CAT VI 600V overvoltage standards
- Display: 4 digits, Resolution 6000 counts
- with a USB port to connect to the PC (Windows software)
- True RMS measurement
- Relative measurement
- Automatic shutdown
- Data hold
- LED backlight
- Auto / manual ranging
- Low-Power display
- Diode / continuity test
- Measurement range / tolerances:
- DC Voltage: 600mV / ± 0.5%, 6V/60V/600V / ± 0.8%, 1000V / ± 1.0%
- AC Voltage: 600mV / 6V/60V/600V / ± 1.0%, 1000V / ± 1.5%
- DC Current: 600µA/6000µA/60mA/600mA/6A/10A / ± 1.5%
- AC Current: 600µA/6000µA/60mA/600mA / ± 1.8%, 6A/10A / ± 3.0%
- Resistance: 600Ohm/6KOhm/60KOhm/600KOhm / 6MOhm / ± 0.5%, 60Mohm / ± 1.5%
- Capacitance: 60nF / ± 3.0%, 600nF/6µF/60µF/300µF / ± 5.0%
- Logic frequency: 1Hz ~ 1MHz ± (0.1% +3)
- Linear frequency: 6Hz ~ 10kHz ± (0.05% +8)
- Duty Cycle: 1 % ~ 99%
- Temperature: -55°C ~ 0°C / ± 5.0%, 1°C ~ 1000°C requires ± 2.0%
- Requires 1x 9V block battery
- Dimensions: 190x90x40mm, weight: ~500g
- Packing content: multimeter, test stripping, USB connection cable with coupler, 9v batterie, temperature sensor, software CD
InLine® Digital Multimeter 3 in 1 with RJ45/RJ11 Cable Tester and Battery Tester
The 3-in-1 digital multimeter has been designed as a combination of the functions of a digital multimeter, a tester for modular and network cables, and for measuring batteries
- DC voltage measurement. 0.1 mV to 1000V
- AC voltage measurement: 0.1 mV to 700V
- AC-/DC current measurement: 0.1µA to 10A
- Resistance measurement: 0.1 Ohm to 200 MOhm
- Diode test
- Beeper
- Cable assignment testing for short circuits, faulty wiring, wire replacement, split pairs, shielding
- Battery tester: For batteries with 1.5/6/9V voltage
- Backlight display with 3.5 digits
- Power supply: 9V battery
- Safety: CAT II 1000V / CAT III 600V IEC1010-1
- Operating temperature: 0 to 40°C
- Dimensions: 180 x 85 x 44 mm
- Weight: 360g
ANSMANN 4000001 Battery tester with digital LED voltage display
Reliable and compact tester for rechargeable batteries
The handy pocket-sized battery tester works without a battery or other power supply. It is therefore ready for use at any time and no attention needs to be paid to the power supply or full batteries.
It is suitable for testing 1.5V alkaline batteries and 1.2V NiMH rechargeable batteries in the sizes Micro AAA, Mignon AA, Baby C, Mono D as well as for 9V Blocks E.
Easy operation
The measurement is child's play. Simply clamp the round cells with the correct polarity between the two contact clips, and contact the 9V blocks with the correct polarity on the two contacts on the underside of the housing.
Digital display of the voltage
After contacting a battery or rechargeable battery, the cell voltage is displayed in volts (V). With the help of the table below the voltage display, the charge level of the tested cell can be determined.
The handy pocket-sized battery tester works without a battery or other power supply. It is therefore ready for use at any time and no attention needs to be paid to the power supply or full batteries.
It is suitable for testing 1.5V alkaline batteries and 1.2V NiMH rechargeable batteries in the sizes Micro AAA, Mignon AA, Baby C, Mono D as well as for 9V Blocks E.
Easy operation
The measurement is child's play. Simply clamp the round cells with the correct polarity between the two contact clips, and contact the 9V blocks with the correct polarity on the two contacts on the underside of the housing.
Digital display of the voltage
After contacting a battery or rechargeable battery, the cell voltage is displayed in volts (V). With the help of the table below the voltage display, the charge level of the tested cell can be determined.
InLine® Multimeter with Auto-Range and Autoscan, pocket size
- Pocket-sized multimeter, only 130x62x27mm
- Auto Range: ACV/DCV/Resistance/Continuity/Diode/Temperture/Capacitance/NCV/LIVE/mA/A
- Auto Scan: ACV/DCV/Resistance/Continuity/mA/A
- DC Voltage range: 400mV/4V/40V/400V/600V
- AC Voltage range: 400mV/4V/40V/400V/600V
- DC Current range: 4000mA to 10.00A
- AC Current range: 4000mA to 10.00A
- Resistance range: 400/4k/40k/400k/4M/40MOhm
- Capacitance range: 4.000nF to 1.000mF
- Temperature range: -200°C to 1200°C
- Frequency range 10Hz to 40kHz
- 3999 LCD display, size: 44x30 mm
- NCV/LIVE test
- True RMS
- Safety rating: CAT III 600V
- Auto power off
- Backlight/Torch
- Power: 2x 1.5V battery AAA (included)
InLine® Multimeter with Auto-Range, pocket size
- Pocket-sized multimeter, only 130x62x27mm
- Auto Range: ACV/DCV/Resistance/Continuity/Diode/Temperture/NCV/mA/A
- DC Voltage range: 200mV/2V/20V/200V/600V
- AC Voltage range: 200mV/2V/20V/200V/600V
- DC Current range: 2000mA to 10.00A
- AC Current range: 2000mA to 10.00A
- Resistance range: 200Ohm/2kOhm/20kOhm/200kOhm/2MOhm/20MOhm
- Temperature range: -200°C to 1200° C
- 1999 LCD display, size: 44x30 mm
- NCV/LIVE test
- True RMS
- Safety rating: CAT III 600V
- Auto power off
- Backlight/Torch
- Power: 2x 1.5V battery AAA (included)
Slide gauge, digital with LCD display 150mm
Precision engineer slide gauge for every situation. The large, 5-digit LCD shows the measured value quick and clear. Slide gauge has measuring jaws for measuring outer and inner diameters and a measuring pole for depth measurements.
- 150 mm measuring range
- Resolution: 0.01m
- Tolerance: ±0.03mm at 0-40°C
- 5-digit LCD display, 10 mm high
- Display units inch or mm
- variable adjustment of zero point for measuring differences
- 5 minute timer for saving battery power
- Includes with 1.5V battery /type SR44
- in high-quality plastic box
InLine® Infrared Thermometer with LCD Display
Infrared thermometer with LCD display for simple, non-contact temperature measurement of surfaces.
- Measurement range: -50°C to 500°C (- 58°F to 932°F)
- TAMB measurement: 0°C to 50°C
- Over range indication: "OL" or "- OL"
- Resolution: 0.2
- Field of view: 8:1
- Typical Distance to Target: up to 1.5m
- Emissivity: 0.95
- Auto power off: 20S
- LCD- Back light
- Ambient temperature(TAMB) measurement
- Display selection
- MAX, MIN, AVG value selectable
- Hold function
- Low battery indication
InLine® Digital Multimeter 5 in 1
The 5-in-1 Multimeter combines in addition to the standard electrical measurement values, the temperature, humidity, brightness and sound level measuremen in one device.
- DC voltage measurement: 0.1mV-600V
- AC voltage measurement: 1mV-600V (40Hz-500Hz)
- Current measurement AC / DC: 10mA-10A (AC: 40Hz-200Hz)
- Temperature measurement: -20 to 1000°C
- Frequency Measurement: 1Hz to 200kHz
- Humidity 30% to 90%
- Sound level: 35dB to 100dB
- Brightness: 4000/400000Lux
- Diode test
- Continuity test
- Data hold memory function
- ATO-RANGE
- Auto power off
- Overload protection
- Relative measurement
- Backlight display, 4-digits
- Power supply: 9V block
- Safety: IEC1010-1 CAT III 600V
- Operating temperature: 0 to 40°C
- Dimensions: 185 x 85 x 44 mm
InLine® Multimeter with touch pad and illuminated display, CAT III / CAT IV
Multimeter with touchpad operation, double value display and background illumination of protection class CAT III 1000V / CAT IV 600V. The multimeter has no mechanical switching of the measuring ranges and is therefore less susceptible to dirt. The measuring range is selected by a simple tip on the corresponding key. The display has a bright backlight, which allows easy reading of the measured values.
- Display: Large 2x 4 digits double value display, resolution 6000, dimensions approx. 62X50mm, with LED backlight
- Protection class CAT III 1000V / CAT IV 600V
- Digital calibration.
- 2-color backlighting to display various operating states.
- Automatic AC / DC switching
- AC and DC voltage measurement: 6/60/600/1000V
- Current measurement 600/6000µA, 60/600mA, 6/10A
- Resistance measurement: 600Ohm, 6k/60k/600kOhm, 6M/60MOhm
- Measurement of capacitance: 6n/60n/600n, 6µ/60µ/600µ, 6m/60mF
- Continuity check 0~600.0 OHM
- Diode test 0~3.0V
- Frequency and duty cycle measurement: 0~999.9kHz
- Temperature measurement: -200 to 1000 °C
- Delivery includes: multimeter, test strips, temperature sensor, manual, batteries (2X 1.5V type AA).
