• Fulfils IEEE802.3/802.3u Ethernet and Fast Ethernet standards and PCI Local Bus Version 2.0/2.1/2.2 specification
• N-Way Auto Negotiation Mechanism for automatic detection of network data rate and transmission mode (Full/Half Duplex)
• supports Wake-On-LAN features including Wake-Up Frame and Magic Packet (PCI 2.1 Standard)
• LED display for diagnosis, Remote Boot ROM socket, drivers for all current operation systems
• Chipset: Realtek 8139D, Bus Interface: 32bit Bus Master, PCI, ACPI/WOL: yes
• 3 pin power cable: no, via bus, DMI possible :yes
• Contents: PCI card, driver disk, manual

• 2 x Compact Flash slot
• IDE 44pin male
• Power supply via IDE
• Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes.
• Supports CF-Card type I/II and IBM Microdrive
• Bootable
• Windows 2000/XP/Vista, DOS, Mac, Linux

• Two serial RS-232 ports via PCIe: Ideal for connecting classic serial devices in modern systems – stable and reliable.
• High flexibility thanks to broad protocol support: Supports various bit lengths, parity types and user-defined baud rates – for maximum compatibility.
• ASIX AX99100 chipset for reliable communication: Professional data transfer with integrated flow control (hardware/software) and 256-byte FIFO.
• Universally applicable thanks to low and full profile design: Suitable for servers, workstations or industrial PCs in flat housings.
• Advanced power management features: Supports PCIe Power Management 1.2, remote wakeup and IrDA mode – ideal for continuous industrial use.

The InLine® interface card 76619D expands PCs and workstations with two serial RS-232 ports via PCIe. This solution is ideal for industrial, commercial or technical applications where RS-232 continues to play a key role – for example, for controlling machines, measuring devices, cash registers, modems or laboratory technology.

Equipped with the powerful ASIX AX99100 chipset, the card offers stable data communication at up to 115,200 bps. It supports both hardware and software flow control, various data formats (5 to 9 bits), all common parity options and freely definable baud rates.

Thanks to on-chip FIFO with 256 bytes in the transmit and receive path, loss-free transmission is guaranteed even in intensive applications. The card supports remote wake-up, PCI Power Management 1.2 and slow IrDA mode – a plus point for service and maintenance applications.

With the included low-profile and full-profile bezels, the card can be flexibly adapted to different housing designs. Driver support is available for Windows XP and above and Linux kernel 2.6.x and above.

• Chipset: ASIX AX99100
• Interface: PCIe 2.0 x1
• Connections: 2x 9-pin serial ports (RS-232)
• Supports 5, 6, 7, 8, 9 bit data formats
• Parity: even, odd, none, space, mark
• Transfer rate: up to 115,200 bps
• Supports hardware/software flow control
• FIFO: 256 bytes send & receive buffer per port
• Compatible with standard & low-profile chassis
• Power Management 1.2, remote wakeup, IrDA mode
• Operating systems: Windows XP or newer, Linux 2.6.x or higher
• Operating temperature: 0° C – 55° C
• Storage temperature: -40° C – 70° C
• Humidity: 10% - 90% non-condensing

• Complies with PCIe 2. 0 Gen 1
• Serial data transfer rate up to 230400bps
• Supports 2 x UART serial port
• Global interrupt status register for both UARTs
• 256-byte TX and RX FIFOs
• PCI-Express x1
• DB9 male serial connector
• System Requirements: Windows XP/Vista /7/8.x/10 32/64 bit,Linux 2.6.32 and above

• Einfache Installation, IRQ und E/A Adresse werden automatisch gewählt
• Unterstützt PCI-IRQ Sharing für Benutzung weiterer Schnittstellenkarten
• 32bit PCI Bus, PCI Spezifikationen 2.3 und PCI Power-Management
• Für Windows 2000, 2003 Server 32/64-bit, XP 32/64-bit, Vista 32/64-bit, Linux Kernel ab 2.6.14
• Integrierte 16C550 kompatible UARTs
• 256 Byte FIFO Speicher
• Datentransferrate bis zu 115,2Kb/s
• Unterstützt Hard- und Software Flusskontrolle, sowie das 5,6,7,8,9-bit serielle Format
• Unterstützt Geräte wie serielle Modems, IR-Empfänger, PDA-Kabel, Handy-Datenkabel, ISDN Anlagen, etc.
• MCS9865 Chip

• High network performance for modern IT environments: Supports gigabit speeds (10/100/1000 Mb/s) with low latency - ideal for data-intensive applications.
• Flexible integration thanks to PCIe x1: Compatible with almost all modern mainboards, supports PCI Express 1.1 standard and enables simple retrofitting.
• Compact & space-saving: Also suitable for compact housings with the enclosed low-profile slot bracket - ideal for industrial PCs or space-critical applications.
• Optimised for continuous operation: ECC and CRC support as well as on-chip buffers ensure reliable data transfer in professional use.
• Multiple network functions: VLAN tagging, Wake-on-LAN, RSS, protocol offload and energy-efficient Ethernet (EEE) offer full network control functions.

The InLine® Gigabit network card with PCIe x1 connection is a powerful solution for network connectivity in professional IT environments. It enables reliable gigabit connections via standard CAT.5e cabling and supports all common network standards such as IEEE 802.3, 802.3u and 802.3ab. The integrated Realtek RTL8111H chipset ensures particularly secure data transmission thanks to ECC and CRC functions.

The card is fully compatible with Windows, Linux and macOS systems and is also suitable for compact housings thanks to its low-profile slot bracket. Additional features such as VLAN tagging, RSS, jumbo frames and Wake-on-LAN make it the ideal choice for structured network environments, virtualised systems and energy-saving installations.

• Chip set Realtek RTL8111H
• Complies with PCI Express 1.1
• Integrated OTP memory
• Supports the ECC function (Error Correction Code)
• Supports the CRC function (Cyclic Redundancy Check)
• Supports on-chip buffer for sending/receiving
• Supports PCI MSI (Message Signalled Interrupt) and MSI-X
• Backwards compatible with 10/100BASE-TX networks
• 10 / 100 / 1000 Mb/s data rate
• Compatible with existing CAT-5e UTP cabling or higher
• Fully compatible with IEEE 802.3, 802.3u, 802.3ab
• Supports full-duplex flow control (IEEE 802.3x)
• Supports IEEE 802.1Q VLAN tagging
• Supports IEEE 802.3az-2010 (Energy Efficient Ethernet, EEE)
• Supports Wake on LAN (WoL) and 'RealWoW' (remote wake-up)
• Supports 9K jumbo frames
• Supports transmit buffer 128K bytes and receive buffer 512K bytes
• Supports Quad-Core Receive-Side Scaling (RSS)
• Supports protocol offload (ARP&NS)
• Crossover detection and auto-correction operation
• Ideal for home and office use
• Supports Microsoft Windows XP or newer, Server 2003 or newer, Linux Kernel 2.6.x or newer, macOS X 10.4 or newer
• Operating temperature: 0° C – 55° C
• Storage temperature: -40° C – 70° C
• Humidity: 10% - 90% non-condensing

• Complies with PCI-Express Revision 2.1
• Supports standard and low profile chassis
• 10/100/1000 Mb/s and 2.5 Gb/s data rate auto negotiation operation
• Based on the Realtek RTL8125B chipset
• Fully compliant with IEEE 802.3, 802.3u, 802.3ab
• Supports full duplex flow control (IEEE 802.3x)
• Supports IEEE 802.1P Layer 2 Priority Encoding
• Supports IEEE 802.1Q VLAN tagging
• Crossover Detection and Auto Correction operation
• Supports jumbo frame to 16 KB
• Supports RealWoW technology that enables remote wake-up of a sleeping PC through the internet
• Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support
• Supports Windows 11 /10 / 8.1 / 8 / 7 32/64-bit, Linux
• Package content: PCI-E 2.5G Ethernet controller card, low profile bracket, drivers CD, manual

• Adapter for one M.2 NVME SSD (PCIe 4.0 x4).
• Incl. heat sink to prevent overheating and throttling
• ARGB lighting, controllable via the mainboard software
• For one NVMe-M.2-SSD with M-Key or B+M-Key
• SSD type: 80/60/42/30 x 22 mm M.2
• Internal interface: PCIe x4/x8/x16
• Data transfer rate: up to 64 Gb/s
• Dimension (product): 22 x 120 x 150 mm
• Dimension (packaging): 30 x 150 x 175 mm
• Weight (product/total): 0.176 / 0.250 kg
• Colour: black
• System compatibility: Windows 10
• Content: 1x PCI card, 1x heat sink, 1x high-profile bracket, 1x low-profile bracket, 4x heat conduction pad, 1x ARGB cable, 1x mounting material, 1x instruction manual

• Supports an NVMe SSD (M.2 Key M) for compact high-performance storage solutions
• PCIe 3.0 x1 interface with up to 1 Gb/s effective bandwidth
• Automatic lane detection on boot for easy system integration
• LED indicator for displaying read and write activities
• No additional driver required – native support by Windows and Linux

The InLine® PCI Express card expands your system with an internal NVMe M.2 slot, which enables the connection of an M.2 SSD (Key M). Thanks to the PCIe 3.0 x1 interface with up to 1 Gb/s transfer rate, the card is ideal for systems that require additional fast storage space.

The automatic lane detection during boot ensures optimal integration into the system. The M.2 SSD is powered directly via the PCIe bus (3.3 V), and an LED indicator provides information about the current operating and activity status.

Technical data:

• Bus type & PCIe: PCIe 3.0 x1 (operational in x1, x4, x8 and x16 slots)
• Connection – interfaces:
  - 1 x M.2 slot (Key M) for NVMe SSDs
  - Supported module sizes: 2230, 2242, 2260, 2280
• Dimension: 95 mm x 52 mm (PCIe board)
• Data rate: Maximum approx. 1 Gb/s

Operating conditions:

• Operating temperature: -40 °C to +85 °C

Features:

• Automatic detection of the lane configuration during booting
• Onboard LED indicator (1x read/write activity LED)
• The M.2 NVMe SSD draws its power supply directly from the PCIe bus (3.3 V)
• No additional driver required

System requirements:
Hardware:

• PC with one free PCIe slot (x1, x4, x8 or x16)
• Motherboard that supports PCIe 3.0 or higher

Operating system support:

• Windows: 11, 10, 8, 8.1
• Windows Server: 2012 R2
• Linux: Native support (Fedora, SUSE, Ubuntu, Red Hat)

Scope of delivery:

• 1 x InLine® PCI Express card to 1x internal NVMe M.2
• 1 x low-profile slot bracket
• 1 x hand screwdriver
• 2 x screws
• 1 x heat conduction pad
• 1 x instruction manual (German/English)
• Operating temperature: 0° C – 55° C
• Storage temperature: -40° C – 70° C
• Humidity: 10% - 90% non-condensing

• Complies with PCI Express Base Specification Revision 2.0
• Supports PCI Express x1 Lane interface with up to 5Gb/s throughput.
• Complies with Universal Serial Bus 3.0 Revision 1.0 specification.
• Backward compatible to USB 2.0 and PCI-Express 1.0
• Complies with eXtensible Host Controller Interface (xHCI) specification Revision 1.0
• Supports the following data transfer rates: USB 3.0 mode up to 5 Gb/s, USB 2.0 mode up to 480 Mb/s
• Supports Bulk Only Transfer (BOT) mode and USB Attached SCSI Protocol (UASP) mode.
• Max. 5V/900mA power output on each USB 3.0 port (with power supply connected)
• Supports 3 external and 1 internal USB 3.0 ports
• Fully Plug and Play compatible
• Supports standard and low-profile computer enclosures
• System requirements: Computer with one available PCI Express x1 slot, Windows 10 / 8.x / 7 / Vista / XP 32-/64-Bit
• VIA VL805 Chipset

• USB 3.0 PCI-Express card
• user manual
• driver CD
• Low-Profile slot bracket

• Compliant with PCI Express Base Specification Revision 1.1
• Compliant with PCI Express to PCI/PCI-X Bridge Specification Revision 1.0
• Compliant with PCI Local Bus Specification Revision 3.0
• PCI Express x1 link with 2.5Gb/s data rate
• 3.3V PCI signaling with 5V I/O tolerance
• System Requirement: PC Computer with one free PCI-Express x1, x4, x8 and x16 Slot
• Package Content: PCI-Express to PCI Adapter x 1, User's Manual x 1

• Fully compliant with PCI-Express Base Specification Revision 1.1
• Single-Lane (x1) PCI-Express with throughput up to 2.5Gb/s
• Supports Re-map function for legacy ports
• Supports Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit, Windows 7 32/64-bit, Windows 8, Windows 10, Linux, Mac OS/X 10..5, and DOS 6.22
• Parallel Port Interface 25pin DB female
• IEEE1284 compatible parallel port
• Supports SPP, PS2, EPP & ECP mode
• Moschip MCS9900CV-AA

• Complies with PCI-Express Revision 1.1
• Supports standard and low profile chassis
• 1-Lane (x1) PCI-Express with transfer rate 2.5Gb/s full duplex channel
• A high-performance 1000BASE-T Ethernet controller card
• Backward compatible to 10/100BASE-TX networks
• 10/100/1000Mb/s Data rate automatic negotiation
• Compatible with existing CAT-5 UTP cabling
• Fully IEEE 802.3, 802.3u, 802.3u, 802.3ab compatible
• Supports full duplex flow control (IEEE 802.3x)
• Supports IEEE 802.1P Layer 2 priority encoding
• Supports IEEE 802.1Q VLAN tagging
• Crossover detection and auto-correction operation
• Fully Plug and Play
• Ideal for home and office use
• Supports Microsoft Windows 10 / 8.x / 7 / Vista / Server 2008/2003 / XP (32/64-bit), Linux 4.10.x, Mac OSX 10.10 or higher

• InLine® Dual Gigabit Network Interface Card
• PCI Express
• 1x driver CD
• user manual
• 1x low-profile slot bracket

• Fully compliant with PCI-Express Base Specification Revision 1.1
• Single-Lane (x1) PCI-Express with throughput up to 2.5Gb/s
• Supports Re-map function for legacy ports
• Supports DOS, Windows 8 / 7 / Vista / XP / 2000 / Server 2003-2008 (all 32/64-bit), Linux & Mac OS/X 10.5 operating system
• Serial Port (RS232) interface, compatible with industrial standard 16C450/16C550 UART
• On chip 256-byte depth FIFO in transmit, receive path of each port
• Transfer data rates up to 250Kb/s on each port
• Supports hardware and software flow control
• Supports 5-, 6-, 7-, 8- bit serial format
• Supports even, odd, none, space & mark parity
• Supports 1 or 2 Stop bit operation
• Package Contents: PCI-Express I/O card, User manual, Driver-CD
• Chipset: Moschip MCS9922 CV

• Supports an NVMe SSD (M.2 Key M) for fast memory expansion
• PCIe 3.0 x4 interface with a maximum bandwidth of up to 32 Gb/s
• Automatic lane detection on boot for easy system integration
• Onboard LED indicator for displaying read and write activities
• No additional drivers required – ready for immediate use

The InLine® PCI Express card enables the operation of a NVMe SSD (M.2 Key M) via a PCIe 3.0 x4 interface with up to 32 Gb/s bandwidth, enabling fast boot times and optimized data transfers.

Thanks to automatic lane detection during booting, the card is easily integrated into the system. The power supply of the NVMe SSD is provided directly via the PCIe bus (3.3 V). In addition, an LED indicator facilitates error diagnosis and shows the operating status of the SSD.

Technical data:

• Bus type & PCIe: PCIe 3.0 x4 lane (maximum bandwidth up to 32 Gb/s)
• Connection – interfaces:
  • 1 x M.2 slot (Key M) for NVMe SSDs
  • Compatible module sizes: 2230, 2242, 2260, 2280
• Data rate: Each port supports transfer rates of up to 4 Gb/s
• Dimensions: 95 mm x 52 mm (PCIe board)

Operating conditions:

• Operating temperature: -40 °C to +85 °C

Functions:

• Automatic detection of the lane configuration at boot
• Onboard LED indicator to display the read/write activity
• NVMe SSD receives its power supply directly via the PCIe bus (3.3 V)
• No additional driver required

System requirements: Hardware:

• PC with a free PCIe slot (x4, x8 or x16 – the card is compatible)
• Motherboard with support for PCIe 3.0 or higher

Operating system support:

• Windows: 11, 10, 8.1, 8, 7
• Windows Server: 2012 R2
• Linux: from kernel 2.6

Scope of delivery:

• 1 x InLine® PCI Express card to 1x internal NVMe M.2
• 1 x low-profile slot bracket
• 1 x hand screwdriver
• 2 x screws
• 1 x heat conduction pad
• 1 x instruction manual (German/English
• Operating temperature: 0° C – 55° C
• Storage temperature: -40° C – 70° C
• Humidity: 10% - 90% non-condensing

• Supports two NVMe M.2 SSDs for maximum performance and flexibility
• PCIe 3.0 x8 connection with up to 64 Gb/s bandwidth
• Hyper M.2 technology for automatic lane configuration
• LED indicators for easy fault diagnosis and operating status
• No additional driver required - native Windows and Linux support

The InLine® PCI Express card expands your system with two internal NVMe M.2 slots and enables the parallel operation of two NVMe SSDs with full PCIe bandwidth. Thanks to Hyper M.2 technology, the lane configuration is automatically detected at boot time for optimal system integration.

With a PCIe 3.0 x8 interface, the card offers a maximum bandwidth of up to 64 Gb/s, with each M.2 slot supporting a data rate of up to 4 GB/s. LED indicators for read and write activity make it easy to monitor the operating status.

Technical data:

• Bus type & PCIe: PCIe 3.0 (8 GT/s) x8 lanes (for up to 64 Gb/s bandwidth)
• Connection - interfaces: 2 x M.2 Key M slots - for the installation of NVMe SSDs
• Chip set: PI6C20400BLE
• Compatible M.2 module sizes: Supports 2230, 2242, 2260, 2280, 22110 SSDs
• Data rate: Each slot supports transfer rates of up to 4 GB/s
• Dimensions: 135 mm x 68 mm (PCIe board)

Operating conditions:

• Operating temperature: -40 °C to +85 °C

Functions:

• Automatic detection of the lane configuration during boot
• Onboard LED indicators (2 x read/write activity LEDs)
• M.2 SSDs draw their power supply directly via the PCIe bus
• No additional driver required - native support by the operating system

System requirements hardware:

• PC with one free PCIe 3.0 x8 (or x16 slot)
• Motherboard that supports PCIe bifurcation

PCIe bifurcation for optimal use of the card:

In order for both M.2 SSDs to be operated simultaneously, the PCIe slot used must often be set to Bifurcation mode in the BIOS/UEFI. This splits the available PCIe lanes into several channels (e.g. one x8 slot into two x4 channels). The exact designation varies depending on the motherboard manufacturer and BIOS/UEFI version. Terms such as "PCIe Bifurcation", "Lane Splitting" or "PCIe Slot Configuration" may be used. Please consult your mainboard manual for the correct setting and then check whether both NVMe SSDs are recognized.

Operating system support:

• Windows: 11, 10, 8, 7
• Windows Server: 2012 R2
• Linux: Native support (Fedora, SUSE, Ubuntu, Red Hat) - no additional driver required

Scope of delivery:

• 1 x InLine® PCI Express card to 2x internal NVMe M.2
• 1 x low-profile slot bracket
• 1 x hand screwdriver
• 4 x screws
• 2 x thermal pads
• 1 x instruction manual (German/English)
• Operating temperature: 0° C – 55° C
• Storage temperature: -40° C – 70° C
• Humidity: 10% - 90% non-condensing

• Powerful 10/100/1000BASE-T network card with Realtek RTL8169SC chipset
• Supports 1 Gb/s data transfer rate over existing CAT.5e or higher copper cabling
• Compatible with PCI V2.2 (32/64-bit, 33/66 MHz) slots
• Supports Wake on LAN, VLAN tagging and ACPI power management
• Broad driver support for Windows, Linux and macOS

The InLine® Gigabit PCI network card offers a powerful and cost-effective solution for connecting to wired networks in the home and office. With a maximum data rate of 1 Gb/s, it is ideal for fast file transfers, media streaming or reliable Internet connections.Thanks to its Realtek RTL8169SC chipset, the card guarantees high compatibility and stability. It can be easily integrated into systems with PCI V2.2 slots (32/64-bit, 33/66 MHz). The network card supports modern network functions such as full-duplex flow control, IEEE 802.1Q VLAN tagging and Wake on LAN (WoL). Crossover detection and auto-correction mode are also part of the range of functions.With support for current operating systems such as Windows, Linux and macOS, the network card is versatile. An optional boot ROM is also supported, making it suitable for special network requirements.

Technical specifications:

• Chip set: Realtek RTL8169SC
• Interface: PCI V2.2 (32/64-bit, 33/66 MHz)
• Transmission rate: 10 / 100 / 1000 Mb/s
• Compatible cabling: CAT.5e or higher
• Network standards: IEEE 802.3, 802.3u, 802.3ab
• Supports: Full-duplex flow control, VLAN tagging, Wake on LAN (WoL), ACPI, Boot ROM (optional)
• Crossover detection and auto-correction
• Compatible operating systems: Windows 98SE or newer, Server 2003 or newer, Linux kernel ≥ 2.4, macOS X 10.4 or newer
• Operating temperature: 0° C – 55° C
• Storage temperature: -40° C – 70° C
• Humidity: 10% - 90% non-condensing

• Powerful USB expansion via PCIe: Seven USB-A 3.2 Gen.1 ports for modern peripherals with up to 5 Gb/s data transfer rates.
• Stable power supply via SATA connection: Ideal for devices with higher power requirements such as docking stations, mass storage devices or charging functions.
• Modern VL805+VL812 chipset combination: High compatibility and reliable data transfer under continuous load.
• Backward compatible for maximum flexibility: Supports USB 2.0 and 1.1 – ideal for mixed device environments.
• Broad system support: Compatible with Windows XP and Linux kernel 2.6.x or higher – for servers, workstations and industrial PCs.

The InLine® interface card 76661L offers a high-quality solution for expanding USB ports in professional system environments. It provides seven external USB-A 3.2 Gen.1 ports via PCI Express V2.0 – ideal for the parallel connection of input devices, storage media, docking stations or other USB peripherals.

Thanks to the integrated 15-pin SATA power connector, the card is able to reliably supply even devices with increased power requirements. The VIA chipset (VL805+VL812) ensures a stable connection with a maximum transfer rate of up to 5 Gb/s per port.

Full backward compatibility with USB 2.0 and 1.1 allows older USB devices to be integrated without any problems. This makes the card the ideal solution for mixed IT environments in companies, workshops or technical facilities.

Installation is simple via a free PCIe slot. Driver support is provided for all common operating systems from Windows XP and Linux kernel 2.6.x. This allows any workstation, server or industrial PC to be upgraded quickly and effectively.

• Chipset: VIA VL805 + VL812
• Interface: PCI Express 2.0
• External connections: 7x USB-A 3.2 Gen.1
• Internal connections: 1x SATA power connection (15-pin)
• Data rates: 5 Gb/s, 480 Mb/s, 12 Mb/s, 1.5 Mb/s (downward compatible)
• Compatible operating systems: Windows XP or newer, Server 2008 or newer, Linux from kernel 2.6.x
• Operating temperature: 0° C – 55° C
• Storage temperature: -40° C – 70° C
• Humidity: 10% - 90% non-condensing

• Easy installation, automatically selects IRQ and I/O address
• Fully compliant with PCI Local Bus Specification Revision 2.3
• Supports PCI power management
• Supports PCI IRQ sharing feature, saves valuable resources for other add-on cards
• Supports multiple cards on one PC
• Supports DOS 6.22, Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit and Linux kernel 2.6.14 or above
• Parallel Port (IEEE1284) interface
• Supports SPP, PS2, EPP and ECP 1.9 mode
• Fast data rate up to 1.5MB/s
• On-chip 256-byte FIFO
• MCS9865 Chip

• Based on the ASMedia ASM1061R chipset
• x1 PCIe interface card with up to 2.5Gb / s bus bandwidth
• Form Factor: Full-size Mini-PCIe card
• 2 vertical, internal SATA ports
• Compliant with the PCI Express 2.0 specifications based
• Supported by the built-in Windows drivers
• SATA: 2x SATA 6Gb/s port
• Conform to the SATA specification Rev. 3.2
• Conform to the SATA AHCI specification 1.3
• Data transfer deeds of up to 6Gb/s, 3Gb/s and 1.5Gb/s are supported
• For connecting SATA III, II and I hard drives and SSD suitable
• Supports Native Command Queue (NCQ)
• Supports RAID 0, RAID 1 and SPAN mode
• Automatic rebuild is supported
• System Requirements: Computer with a free mini PCI Express slot, Operating System Windows 8.1/8/7/Vista
• Package content: Mini-PCIe card 2x SATA 6Gb/s, manual

• Highest network performance on four ports: The card offers four RJ45 ports with up to 2.5Gb/s per port for maximum bandwidth in demanding IT environments.
• Optimised for professional network infrastructures: Supports VLAN tagging, double VLAN, RSS and VMQ - ideal for virtualised servers and structured networks.
• Compact and flexible in use: Low-profile bracket supplied allows use in compact industrial PCs and server housings.
• Future-proof technology with broad compatibility: PCIe x4 connection, Realtek RTL8125B chipset and support for Windows and Linux systems.
• Precise time synchronisation for industrial applications: Supports IEEE 1588v2, 802.1Qav and 802.3az for time-critical applications and energy-efficient operation.

The InLine® Quad Gigabit PCIe network card 51127A was developed for demanding professional applications and combines maximum network performance with flexible compatibility. With four RJ45 ports and a transfer rate of up to 2.5Gb/s per port, it is ideal for use in virtualised server environments, industrial control systems or high-performance workstations.

Thanks to the Realtek RTL8125B chipset and PCI Express x4 interface (compatible with x1/x4/x8/x16 slots), it not only offers full performance, but also supports state-of-the-art functions such as RSS (Receive Side Scaling), Virtual Machine Queue (VMQ), VLAN tagging, Double VLAN as well as ECC and CRC functions for secure data transmission.

The card is compatible with both Windows and Linux and supports energy-efficient networks in accordance with IEEE 802.3az. Functions such as Wake-on-LAN, "RealWoW" and time synchronisation in accordance with IEEE1588v2 make it an ideal solution for professional network architectures where precision and reliability are required.

The included low-profile bracket also makes it easy to install in compact housings such as industrial PCs or 2U servers. Backwards compatibility with 10/100/1000BASE-T and the use of existing Cat.5e cabling, your network remains flexible and future-proof.

• Chip set Realtek RTL8125B
• Complies with PCI Express Revision V2.1
• 2-lane PCI Express bus connection with up to 10Gb/s bus width
• PCI Express interface: x4
• Supports 1-lane 2.5/5 Gb/s PCI Express bus
• Supports 2.5G and 1G Lite mode
• Auto-negotiation with Extended Next Page capability (XNP)
• Supports pair swap/polarity/skew correction
• Supports the ECC function (Error Correction Code)
• Supports the CRC function (Cyclic Redundancy Check)
• Supports PCI MSI (Message Signalled Interrupt) and MSI-X
• Supports on-chip buffers for sending and receiving
• Supports ECMA-393 ProxZzzy standard for hosts in sleep mode
• Supports Wake on LAN (WoL) and "RealWoW" (remote wake-up)
• Supports IEEE1588v1,IEEE1588v2,IEEE80.2AS time synchronisation
• Supports IEEE802.1Qav credit-based shaper algorithm
• Supports IEEE802.1P Layer 2 priority coding
• Supports IEEE802.1ad Double VLAN
• Supports IEEE 802.3az (energy-efficient Ethernet, EEE)
• Supports IEEE802.3bz (2.5GBase-T)
• Supports 16KB jumbo frames
• Supports Virtual Machine Queue (VMQ)
• Supports quad core receive side scaling (RSS)
• Supports protocol offload (ARP&NS)
• Backward compatible with 10/100BASE-TX networks
• 10 / 100 / 1000 / 2500 Mb/s data rate
• Compatible with existing CAT-5e UTP cabling or higher
• Fully compatible with IEEE 802.3, 802.3u, 802.3ab
• Supports full-duplex flow control (IEEE 802.x)
• Supports IEEE 802.1Q VLAN tagging
• Crossover detection and auto-correction mode
• Supports Microsoft Windows Vista or newer, Server 2008 or newer, Linux Kernel 2.4.x or newer
• Operating temperature: 0° C – 55° C
• Storage temperature: -40° C – 70° C
• Humidity: 10% - 90% non-condensing

• Complies with PCI-Express Revision 2.1
• Supports standard and low profile chassis
• 10/100/1000Mb/s and 2.5Gb/s data rate auto negotiation operation
• Based on the Realtek RTL8125B chipset
• Fully compliant with IEEE 802.3, 802.3u, 802.3ab
• Supports full duplex flow control (IEEE 802.3x)
• Supports IEEE 802.1P Layer 2 Priority Encoding
• Supports IEEE 802.1Q VLAN tagging
• Crossover Detection and Auto Correction operation
• Supports jumbo frame to 16 KB
• Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support
• Supports Windows 11 /10 / 8.1 / 8 / 7 32/64-bit, Linux
• Package contents: PCI-E Dual 2.5G Ethernet Card, low-profile bracket, driver CD, manual