• External: 2x USB Typ A female
• Internal: 2x IDC 5-pins female
• Connection cable In/Out round

• Fulfils IEEE802.3/802.3u Ethernet and Fast Ethernet standards and PCI Local Bus Version 2.0/2.1/2.2 specification
• N-Way Auto Negotiation Mechanism for automatic detection of network data rate and transmission mode (Full/Half Duplex)
• supports Wake-On-LAN features including Wake-Up Frame and Magic Packet (PCI 2.1 Standard)
• LED display for diagnosis, Remote Boot ROM socket, drivers for all current operation systems
• Chipset: Realtek 8139D, Bus Interface: 32bit Bus Master, PCI, ACPI/WOL: yes
• 3 pin power cable: no, via bus, DMI possible :yes
• Contents: PCI card, driver disk, manual

• 2 x Compact Flash slot
• IDE 44pin male
• Power supply via IDE
• Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes.
• Supports CF-Card type I/II and IBM Microdrive
• Bootable
• Windows 2000/XP/Vista, DOS, Mac, Linux

• cable length 60cm
• 1:1 configuration (10pin - 9pin): 1-1, 2-2, 3-3, 4-4, 5-5, 6-6, 7-7, 8-8, 9-9, 10-nc
• pin 10 of the socket post connector is not configured

• Blind / closing panel
• For PCI Slot
• Material: aluminium

• SATA plug 7 pin to eSATA socket in slot bracket
• Length ca. 0.5m
• SATA plug with security latch

• Two serial RS-232 ports via PCIe: Ideal for connecting classic serial devices in modern systems – stable and reliable.
• High flexibility thanks to broad protocol support: Supports various bit lengths, parity types and user-defined baud rates – for maximum compatibility.
• ASIX AX99100 chipset for reliable communication: Professional data transfer with integrated flow control (hardware/software) and 256-byte FIFO.
• Universally applicable thanks to low and full profile design: Suitable for servers, workstations or industrial PCs in flat housings.
• Advanced power management features: Supports PCIe Power Management 1.2, remote wakeup and IrDA mode – ideal for continuous industrial use.

The InLine® interface card 76619D expands PCs and workstations with two serial RS-232 ports via PCIe. This solution is ideal for industrial, commercial or technical applications where RS-232 continues to play a key role – for example, for controlling machines, measuring devices, cash registers, modems or laboratory technology.

Equipped with the powerful ASIX AX99100 chipset, the card offers stable data communication at up to 115,200 bps. It supports both hardware and software flow control, various data formats (5 to 9 bits), all common parity options and freely definable baud rates.

Thanks to on-chip FIFO with 256 bytes in the transmit and receive path, loss-free transmission is guaranteed even in intensive applications. The card supports remote wake-up, PCI Power Management 1.2 and slow IrDA mode – a plus point for service and maintenance applications.

With the included low-profile and full-profile bezels, the card can be flexibly adapted to different housing designs. Driver support is available for Windows XP and above and Linux kernel 2.6.x and above.

• Chipset: ASIX AX99100
• Interface: PCIe 2.0 x1
• Connections: 2x 9-pin serial ports (RS-232)
• Supports 5, 6, 7, 8, 9 bit data formats
• Parity: even, odd, none, space, mark
• Transfer rate: up to 115,200 bps
• Supports hardware/software flow control
• FIFO: 256 bytes send & receive buffer per port
• Compatible with standard & low-profile chassis
• Power Management 1.2, remote wakeup, IrDA mode
• Operating systems: Windows XP or newer, Linux 2.6.x or higher
• Operating temperature: 0° C – 55° C
• Storage temperature: -40° C – 70° C
• Humidity: 10% - 90% non-condensing

• It supports 9-pole Sub-D connectors
• Aluminium material

• Blank / closing panel
• For PCi Slot Low Profile
• Material aluminum

• Flexible application options: Supports both male and female 9-pin Sub-D connectors for maximum compatibility in IT environments.
• Easy housing integration: Simply mounts into a free PCI slot – ideal for professional IT systems and server housings.
• Robust metal design: Made of sturdy sheet steel for long-lasting durability and secure fastening of the connectors.
• Ideal for serial interfaces: Perfect for setting up or expanding RS232 connections in industrial or professional applications.
• Dual connection option: Space for two 9-pin Sub-D plugs or sockets – saves space and increases connection density.

The InLine® slot bracket allows easy installation of two 9-pin Sub-D plugs or sockets on the rear of a PC or server housing. Thanks to its standardised design, it fits into any free PCI slot and offers a clean, stable solution for integrating serial interfaces. The robust metal design ensures reliable fastening – ideal for industrial environments, server rooms or professional IT systems. Whether for control devices, measuring systems or serial communication: this slot bracket provides the ideal basis for connecting classic RS232 components. System houses, system integrators and industrial users in particular benefit from the flexibility and quality of this mounting aid.

• Material: sheet steel
• Mounting position: PCI slot (low profile not supported)
• Reception: 2x 9-pin Sub-D (m/f, individually assignable)
• Scope of delivery: Pack of 2

• 3.5" (8.89cm) Front panel hub 4x USB 3.0
• 4x USB Type A female
• Housing Colour: black
• Internal USB 3.0 port at the 19-pol mainboard connector
• Internal power supply with adapter cable via floppy power connector
• Data transfer rate up to 5Gb/s (USB 3.0)
• Backwards compatible with USB 2.0 / USB 1.1

• Bracket with two USB 3.0 Type A connectors
• internal 19pin. Motherboard connector
• length about 0.5m

• Complies with PCIe 2. 0 Gen 1
• Serial data transfer rate up to 230400bps
• Supports 2 x UART serial port
• Global interrupt status register for both UARTs
• 256-byte TX and RX FIFOs
• PCI-Express x1
• DB9 male serial connector
• System Requirements: Windows XP/Vista /7/8.x/10 32/64 bit,Linux 2.6.32 and above

• Einfache Installation, IRQ und E/A Adresse werden automatisch gewählt
• Unterstützt PCI-IRQ Sharing für Benutzung weiterer Schnittstellenkarten
• 32bit PCI Bus, PCI Spezifikationen 2.3 und PCI Power-Management
• Für Windows 2000, 2003 Server 32/64-bit, XP 32/64-bit, Vista 32/64-bit, Linux Kernel ab 2.6.14
• Integrierte 16C550 kompatible UARTs
• 256 Byte FIFO Speicher
• Datentransferrate bis zu 115,2Kb/s
• Unterstützt Hard- und Software Flusskontrolle, sowie das 5,6,7,8,9-bit serielle Format
• Unterstützt Geräte wie serielle Modems, IR-Empfänger, PDA-Kabel, Handy-Datenkabel, ISDN Anlagen, etc.
• MCS9865 Chip

• External: 2x USB type A socket mounted on slot bracket
• Internal: 1x IDC 10-pin socket
• Connection cable In/Out round

• High network performance for modern IT environments: Supports gigabit speeds (10/100/1000 Mb/s) with low latency - ideal for data-intensive applications.
• Flexible integration thanks to PCIe x1: Compatible with almost all modern mainboards, supports PCI Express 1.1 standard and enables simple retrofitting.
• Compact & space-saving: Also suitable for compact housings with the enclosed low-profile slot bracket - ideal for industrial PCs or space-critical applications.
• Optimised for continuous operation: ECC and CRC support as well as on-chip buffers ensure reliable data transfer in professional use.
• Multiple network functions: VLAN tagging, Wake-on-LAN, RSS, protocol offload and energy-efficient Ethernet (EEE) offer full network control functions.

The InLine® Gigabit network card with PCIe x1 connection is a powerful solution for network connectivity in professional IT environments. It enables reliable gigabit connections via standard CAT.5e cabling and supports all common network standards such as IEEE 802.3, 802.3u and 802.3ab. The integrated Realtek RTL8111H chipset ensures particularly secure data transmission thanks to ECC and CRC functions.

The card is fully compatible with Windows, Linux and macOS systems and is also suitable for compact housings thanks to its low-profile slot bracket. Additional features such as VLAN tagging, RSS, jumbo frames and Wake-on-LAN make it the ideal choice for structured network environments, virtualised systems and energy-saving installations.

• Chip set Realtek RTL8111H
• Complies with PCI Express 1.1
• Integrated OTP memory
• Supports the ECC function (Error Correction Code)
• Supports the CRC function (Cyclic Redundancy Check)
• Supports on-chip buffer for sending/receiving
• Supports PCI MSI (Message Signalled Interrupt) and MSI-X
• Backwards compatible with 10/100BASE-TX networks
• 10 / 100 / 1000 Mb/s data rate
• Compatible with existing CAT-5e UTP cabling or higher
• Fully compatible with IEEE 802.3, 802.3u, 802.3ab
• Supports full-duplex flow control (IEEE 802.3x)
• Supports IEEE 802.1Q VLAN tagging
• Supports IEEE 802.3az-2010 (Energy Efficient Ethernet, EEE)
• Supports Wake on LAN (WoL) and 'RealWoW' (remote wake-up)
• Supports 9K jumbo frames
• Supports transmit buffer 128K bytes and receive buffer 512K bytes
• Supports Quad-Core Receive-Side Scaling (RSS)
• Supports protocol offload (ARP&NS)
• Crossover detection and auto-correction operation
• Ideal for home and office use
• Supports Microsoft Windows XP or newer, Server 2003 or newer, Linux Kernel 2.6.x or newer, macOS X 10.4 or newer
• Operating temperature: 0° C – 55° C
• Storage temperature: -40° C – 70° C
• Humidity: 10% - 90% non-condensing

• Complies with PCI-Express Revision 2.1
• Supports standard and low profile chassis
• 10/100/1000 Mb/s and 2.5 Gb/s data rate auto negotiation operation
• Based on the Realtek RTL8125B chipset
• Fully compliant with IEEE 802.3, 802.3u, 802.3ab
• Supports full duplex flow control (IEEE 802.3x)
• Supports IEEE 802.1P Layer 2 Priority Encoding
• Supports IEEE 802.1Q VLAN tagging
• Crossover Detection and Auto Correction operation
• Supports jumbo frame to 16 KB
• Supports RealWoW technology that enables remote wake-up of a sleeping PC through the internet
• Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support
• Supports Windows 11 /10 / 8.1 / 8 / 7 32/64-bit, Linux
• Package content: PCI-E 2.5G Ethernet controller card, low profile bracket, drivers CD, manual

• 68 pin mini Sub D socket exterior to interior 68 pin mini Sub D socket
• exterior screw connection
• Ultra 320 (160 and 80) suitable

• Adapter for one M.2 NVME SSD (PCIe 4.0 x4).
• Incl. heat sink to prevent overheating and throttling
• ARGB lighting, controllable via the mainboard software
• For one NVMe-M.2-SSD with M-Key or B+M-Key
• SSD type: 80/60/42/30 x 22 mm M.2
• Internal interface: PCIe x4/x8/x16
• Data transfer rate: up to 64 Gb/s
• Dimension (product): 22 x 120 x 150 mm
• Dimension (packaging): 30 x 150 x 175 mm
• Weight (product/total): 0.176 / 0.250 kg
• Colour: black
• System compatibility: Windows 10
• Content: 1x PCI card, 1x heat sink, 1x high-profile bracket, 1x low-profile bracket, 4x heat conduction pad, 1x ARGB cable, 1x mounting material, 1x instruction manual