- Career
- Company
- Contact
- Fast Order
- Greatly reduced
- Legal
-
Products
- Adapter / Converter
- Cables
- Computer cases / mobile racks
- Coolers / fans
- I/O cards / front panel / slot brackets
- Input / Output
- Installation / Maintenance
- Locks / tripods
- Mounts / accessories mobile devices
- Network infrastructure
- New Products
- Offers
- Outlet
- Photovoltaics / Solar
- Power / Energy / Light
- Signal control
- Smart Home
- Service Center
- Theme Worlds
Filter
Sales:
Abv:
Abv:
Telescope rail Fantec SRC-SR20, for Fantec SRC-2080x
Fantec SRC-SR20 - Suitable for installation in 19’ cabinets and Server Racks. Mechanical lock for maintenance, ball bearings and low friction resistance
- Rails consisting of 2x telescopic rails
- Installation depth in cabinet 51cm - 86cm
- Incl. mounting bracket and screws
Sales:
Abv:
Abv:
FANTEC SRC-2080X07-12G/6G (2023), 2U 19" storage case, without power supply
19" storage enclosure for installation in 19" industrial cabinets. 12G/6G version: Upgrade of 6G backplane to 12G variant with SFF8643. 6G is still supported. Robust construction and high quality workmanship. Pre-installed backplane for SAS or SATA hard disks. Enclosure expandable with telescopic rails.
- ON/OFF switch, system reset.
- LEDs for ON/OFF, LAN, alarm and hard drive access
- 1x USB 3.0 + 1x USB 2.0 front USB port
- 2U IPC Storage
- Mainboard type: 12" x 10.5"
- Drive bays external: 8x 3.5" , 2.5" can also be mounted
- Drive slots internal: 4x 2.5" or 2x 3.5" in flat design, no 25mm height
- Supports SAS 12Gbit/s connectors (backward compatible)
- Supports SATA 6Gbit/s connectors (backward compatible)
- Supports SAS and SATA hard drives with 29/22pin (female)
- 2x SFF-8643: 4x SAS/SATA to 1x SFF-8643 each
- 2x 4PIN Molex power connector for powering the backplane
- Supports hard drives with DC +12V, +5V and +3.3V
- 8x yellow power LED - illuminates when hard drive is connected
- 8x blue status LED - flashes when hard disk is accessed
- Ready for NT-MR redundant power supply (e.g. 2164 or 2169) with mounting bracket E2452.
- Enclosure type: 19 inch storage enclosure
- Height: 2U
- Installation depth: 550mm
- Mainboard types: M-ATX, ATX, SSI CEB
- 5.25" bays: 0 bays
- 3.5" bays: 8 bays
- Fan type: 3x 80mm in center panel
- Number of PCI slots: 7x low profile PCI slots
- Data Interfaces: USB 3.0, USB 2.0
- Network interfaces: not available
- Case: 1.0mm SECC zinc steel, silver
- Front: anodized aluminum, black
- Handles: Aluminum anodized, black
- SAS / SATA for 8 hard drives
- Front USB
- Screws
- Dimensions product (W x D x H): 430 x 550 x 88 mm
- Weight product: 7.7 kg
Sales:
Abv:
Abv:
FANTEC SRC-4240X07, 4U 19" storage case without power supply, 680mm deep
19" storage enclosure for installation in 19" industrial cabinets. Robust construction and high-quality workmanship. Pre-installed backplane for SAS or SATA hard drives. Expandable with telescopic slides.
Special features:
Weight: 21 kg
Special features:
- Supports SAS 6Gbit/s connections (downward compatible)li>Supports SATA 6Gbit/s connections (downward compatible)li>Supports SAS and SATA hard disks with 29/22Pin (female)
- 6x SFF-8087: each 12x SAS/SATA to 3x SFF-8087 per backplane
- 5x 4PIN Molex power connector per backplane
- supports hard disks with DC +12V, +5V and +3.3V
- 24x yellow power LED - lights up when hard disk is connected
- 24x blue status LED - flashes when hard disk is accessed
- Case type: 19 inch Storage case
- Height: 4 HE
- Installation depth: 680 mm
- Mainboard Types: M-ATX, E-ATX, ATX, SSI CEB, SSI EEB
- 5.25" bays: 0 bays
- 3.5" bays: 24 bays
- fan type: 3x 120mm (Hot Swap) in the center bar and 2x 80mm in the rear panel
- Number of PCI slots: 7x PCI PCI slots
- Data interfaces: USB 2.0 Host
- Network interfaces: not available
- housing: 1.0mm SECC zinc steel, silver
- front: aluminum anodized, black
- handles: Aluminium anodized, silver
- SAS / SATA for 24 hard disks
- Front USB
- Screws
Weight: 21 kg
Sales:
Abv:
Abv:
FANTEC TCG-4860X07-1, 19" Server case 4U, without PSU, 688mm deep, black
19" server housing for installation in 19" industrial cabinets. Robust construction and high-quality workmanship. Expandable with telescopic slides, removable frames, additional fans or fan monitoring. The large installation depth of 688mm allows the installation of mainboards up to the E-ATX/ SSI EEB form factor. As standard, all housings of this installation depth are equipped with 3 additional fans in the middle wall. With an installation height of 4 height units, it is possible to install up to 7 plug-in cards vertically and there is also a high degree of flexibility with regard to equipment and upgrade options. In addition, a wide range of power supply units with up to 2000 watts is available, optionally even in redundant design. The safety-oriented workmanship and the use of high-quality materials such as SECC steel and aluminium stand for reliability and quality.
- ON/OFF switch
- LEDs for ON/OFF switch and hard disk access
Sales:
Abv:
Abv:
FANTEC SRC-4240X07-12G, 4U 19" storage case without power supply, 680mm deep
19" storage enclosure for installation in 19" industrial cabinets. Robust construction and high quality finish. Pre-installed backplane for SAS or SATA hard disks. Expandable with telescopic rails.
- 24x SAS/SATA bays with 2 status LEDs per bay.
- Slots with holes for 3.5" and 2.5" data media
- Drive mounting 2x 2.5" internal
- ON/OFF switch, system reset
- USB 2.0 front USB port
- 3x 120mm hot swap fans between backplane and mainboard
- 2x 80mm fans at the rear of the case
- 4U IPC Storage
- Mainboard type: 12" x 10.5", 12" x 13"
- Drive bays 3.5": 24x external
- Drive mounting 2x 2.5" internal
- Supports SAS 12Gbit/s connections (downward compatible)
- Supports SATA 6Gbit/s connectors (backward compatible)
- Supports SAS and SATA hard disks with 29/22pin (female)
- 6x SFF-8643: 12x SAS/SATA to 3x SFF-8643 per backplane
- 3x 4PIN Molex power connector per backplane
- Supports hard disks with DC +12V, +5V and +3.3V
- 24x yellow power LED - lights up when hard disk is connected
- 24x blue status LED - flashes when hard disk is accessed
- Type & form factor: 19-inch storage enclosure type
- Overall height: 4 U
- Installation depth: 680mm
- Mainboard types: M-ATX, ATX, E-ATX, SSI CEB, SSI EEDrive bays: 5.25" bays: 0 bays / 3.5" bays: 24 bays
- Fans: 3x 120mm (hot swap) in the centre and 2x 80mm in the rear panel
- Number of PCI slots: 7x PCI PCI slots
- Connectors: Data interfaces: USB 2.0 HostCase material/colour: Case 1.0mm SECC zinc steel, silver / Front panel aluminium anodised, black / Handles aluminium anodised, silver
- Backplane SAS / SATA for 24 hard disks
- Equipment: Front USB
- Included accessories: Screws
Sales:
Abv:
Abv:
FANTEC SRC-2012X07-12G/6G 2U 550mm storage enclosure without power supply unit
19" storage enclosure for installation in 19" industrial cabinets. Robust construction and high-quality workmanship. Pre-installed backplane for SAS or SATA hard disks. Expandable with telescopic rails.
- ON/OFF switch, reset switch
- LEDs for ON/OFF, hard disk access, network access
- 1x USB 2.0 front USB port
- 2U IPC storage
- Mainboard type: 12" x 10.5
- External drive bays: 12x 3.5" or 2.5".
Special features
- Supports SAS 12Gbit/s connections (backward compatible).
- Supports SATA 6Gbit/s connectors (backward compatible).
- 3x SFF-8643: 4x SAS/SATA to 1x SFF-8643 per backplane
- 6x 4PIN Molex power connector: 2x 4PIN Molex power connector per backplane, (180° rotated)
- Supports hard disks with DC +12V, +5V and +3.3V
- 12x green power LED - lights up when hard disk is connected.
- 12x blue status LED - flashes when hard disk is accessed.
Type & form factor Enclosure type:
- 19 inch storage enclosure
- Height: 2 U
- Installation depth: 550mm
- 3.5" slots: 12 slots
- Fans: 3x 80mm in the centre panel
- Slots, number of PCI slots: 7x low profile PCI slots
- Connections Data interfaces: USB 2.0 host
Enclosure material/colour
- Enclosure: 1.0mm SGCC zinc steel, silver
- Front: anodised aluminium, black
- Handles
- Included accessories: Screws
Dimensions product (W x D x H): 430 x 550 x 88 mm (installation dimension)
Weight product: 9 kg
Sales:
Abv:
Abv:
FANTEC SRC-2612X07, 2U 19" storage enclosure without power supply, 680mm deep
19‘ storage enclosure for installation in 19’ industrial cabinets. Robust construction and high-quality workmanship. Pre-installed backplane to accommodate SAS or SATA hard drives. Expandable with telescopic rails.
- Supports SAS 6Gbit/s connections (backwards compatible)
- Supports SATA 6Gbit/s connections (backwards compatible)
- 3x SFF-8087: 4x SAS/SATA to 1x SFF-8087 per backplane
- 5x 4PIN Molex
- Supports hard drives with DC +12V, +5V and +3.3V
- 8x yellow power LED - lights up when a hard drive is connected
- 8x blue status LED - flashes when a hard drive is accessed
Sales:
Abv:
Abv:
FANTEC SRC-4120X08, 4U 19" server case 12x SAS & SATA without power supply 680mm
19" storage enclosure for installation in 19" industrial cabinets. Robust construction and high-quality workmanship. Pre-installed backplane for SAS or SATA hard disks. Expandable with telescopic rails.
- 12x SAS/SATA bays with 2 status LEDs per bay.
- Slots with holes for 3.5" and 2.5" data media
- ON/OFF switch, system reset
- USB 2.0 front USB port
- 3x 120mm hot swap fans between backplane and mainboard
- 2x 80mm fans at the rear of the case
- 4U IPC storage enclosure
- Mainboard type: 12" x 10.5", 12" x 13" (M-ATX, E-ATX, ATX, SSI CEB, SSI EEB)Drive bays 3.5": 12x internal
- Drive mounting 2x 2.5" internal
- Supports the SAS 6Gbit/s connections (downward compatible)
- Supports SATA 6Gbit/s connectors (backward compatible)
- Supports SAS and SATA hard disks with 29/22PIN (female)
- 3x SFF-8087: 4x SAS/SATA to one SFF-8087 each
- 3x 4PIN Molex power connector per backplane
- Supports hard disks with DC +12V, +5V and +3.3V
- 8x yellow power LED - lights up when hard disk is connected
- 8x blue status LED - flashes when hard disk is accessed
- Installation depth: 680mm
- 12x 3.5" drive bays
- Fan type: 3x 120mm (hot swap) in the centre bar and 2x 80mm in the rear panel
- Number of PCI slots: 7x PCI PCI slots
- Data interfaces: USB 2.0 host
- Enclosure material/colour: Enclosure 1.0mm SECC zinc steel, silver, Front: Aluminium anodised, black, Handles: Aluminium anodised, silver
- Backplane: SAS / SATA for 12 hard disks
- Front USB
- Included accessories: Screws
- Dimensions product (W x D x H): 430 x 680 x 176mmWeight product: 17.8 kg
Sales:
Abv:
Abv:
FANTEC SRC-4240X07-6GE Expander 24xSAS&SATA, 19" storage enclosure with 4U/680mm
19" storage enclosure for installation in 19" industrial cabinets. Robust construction and high-quality workmanship. Pre-installed backplane for SAS or SATA hard disks. Expandable with telescopic rails.
- 24x SAS/SATA bays with 2 status LEDs per bay.
- Slots with holes for 3.5" and 2.5" data media
- Drive mounting 2x 2.5" internal
- ON/OFF switch, system reset
- USB 2.0 front USB port
- 3x 120mm hot swap fans between backplane and mainboard
- 2x 80mm fans at the rear of the case
- 4U IPC storage
- Mainboard type: 12" x 10.5", 12" x 13"
- Drive bays 3.5": 24x external
- Drive mounting 2x 2.5" internal
Special features
- Supports SAS 12Gbit/s connections (downward compatible)
- Supports SATA 6Gbit/s connectors (backward compatible)
- Supports SAS and SATA hard disks with 29/22pin (female)
- 3x SFF-8087: 8x SAS/SATA to 1x SFF-8087 each
- 6x 4PIN Molex power connector on backplane
- Supports hard disks with DC +12V, +5V and +3.3V
- 24x yellow power LED - lights up when hard disk is connected
- 24x blue status LED - flashes when hard disk is accessed
Type & form factor
- Enclosure type: 19 inch storage enclosure
- Height: 4 U
- Installation depth680mm
- Mainboard types: M-ATX, ATX, E-ATX, SSI CEB, SSI EEB
- 3.5" slots: 24 slots
- Fans: 3x 120mm (hot-swap) in the centre crossbar and 2x 80mm in the rear panel
- 7x PCI PCI slots
- Connections: USB 2.0 host
Enclosure material/colour
- Enclosure: 1.0mm SECC zinc steel, silver
- Front: anodised aluminium, black
- Handles: Anodised aluminium, silver
- Accessories supplied: Screws
Dimensions product (W x D x H)430 x 680 x 176 mm
Weight product: 21 kg
Sales:
Abv:
Abv:
FANTEC TCG-4880X07-1, 4U 19" server case without PSU, 688mm deep, black
19‘ server housing for installation in 19’ industrial cabinets. Robust construction and high-quality workmanship. Can be extended with telescopic rails, removable frames, additional fans or fan monitoring.
Accessories supplied:
- ON/OFF switch, system & alarm reset
- LEDs for ON/OFF switch and hard drive access
- 2x USB 2.0 front USB port
- 4U IPC
- Mainboard type: 12’ x 13’
- Drive bays 5.25": 6x external
- 3.5’ drive bays: 2x external, 2x internal
- Air filter: Replaceable and washable
- Front doors: Lockable
- Installation depth for 5.25’ devices: Max. 240 mm incl. cable
- Enclosure type: 19 inch server enclosure
- Height: 4 U
- Installation depth: 688mm
- Mainboard types: M-ATX, ATX, E-ATX, SSI CEB, SSI EEB
- 5.25’ bays: 6 bays
- 3.5’ bays: 4 bays
- Fan type: 3x 120mm in the centre panel, 1x 80mm on the rear panel
- Number of PCI slots: 7x PCI slots
- Data interfaces: USB 2.0 Host
- Housing: 1.2mm SECC zinc-coated steel, black
- Front: Anodised aluminium, black
- Handles: Anodised aluminium, black
Accessories supplied:
- USB cable with wiring diagram
- screws
- Cable ties
- key
- Dimensions (W x D x H): 482.6 x 688 x 176.8 mm
- Weight: 15 kg
Sales:
Abv:
Abv:
FANTEC SRC-4080X08, 4U 19" server case 8x SAS & SATA without power supply 680mm
19" storage enclosure for installation in 19" industrial cabinets. Robust construction and high-quality workmanship. Pre-installed backplane for SAS or SATA hard disks. Expandable with telescopic rails.
- 8x SAS/SATA bays with 2 status LEDs per bay.
- Slots with holes for 3.5" and 2.5" data media
- ON/OFF switch, system reset
- USB 2.0 front USB port
- 3x 120mm hot swap fans between backplane and mainboard
- 2x 80mm fans at the rear of the case
- 4U IPC storage enclosure
- Mainboard type: 12" x 10.5", 12" x 13" (M-ATX, E-ATX, ATX, SSI CEB, SSI EEB)Drive bays 3.5": 8x internal
- Drive mounting 2x 2.5" internal
- Supports the SAS 6Gbit/s connections (downward compatible)
- Supports SATA 6Gbit/s connectors (backward compatible)
- Supports SAS and SATA hard disks with 29/22PIN (female)
- 2x SFF-8087: 4x SAS/SATA to one SFF-8087 each
- 2x 4PIN Molex power connector per backplane
- Supports hard disks with DC +12V, +5V and +3.3V
- 8x yellow power LED - lights up when a hard disk is connected
- 8x blue status LED - flashes when hard disk is accessed
- Installation depth: 680mm
- 8x 3.5" drive bays
- Fan type: 3x 120mm (hot swap) in the centre bar and 2x 80mm in the rear panel
- Number of PCI slots: 7x PCI PCI slots
- Data interfaces: USB 2.0 host
- Enclosure material/colour: Enclosure 1.0mm SECC zinc steel, silver, Front: Aluminium anodised, black, Handles: Aluminium anodised, silver
- Backplane: SAS / SATA for 8 hard disks
- Front USB
- Included accessories: Screws
- Dimensions of product (W x D x H): 430 x 680 x 176mmWeight of product: 17 kg
Sales:
Abv:
Abv:
48.26cm (19") industrial PC case 3HE Fantec TCG-3830KX07A-1, w/o power supply
3HE case with 2x 5.25'' (13.34cm) + 1x 8.89cm (3.5") open slots and 5x 8.89cm (3.5") internal. Suitable for standard PS/2 power supply pack. Case color is black.
- Drive bays: 2x 5.25'' (13.34cm) + 1x 3.5'' (8.89cm) open, 5x 8.89cm (3.5") internal
- Mainboard type: ATX (30.48cm (12") x 24.38cm (9.6"))
- Fan: 1x 80mm & 1x 60mm at back side, 2x 80mm optional
- Switches: ON/OFF switch, System & Alarm Reset
- Indicators: LEDs for ON/OFF switch and HDD access
- Slots: 7 open slots at back side
- Air filter: may be replaced and cleaned
- Security: both front doors are lockable
- Speakers: 0.4W integrated in interior
- Material/ color of case: made of 1.2mm SECC zinc-coated steel in black, material /color front: aluminum anodized in black, material /color handles: aluminum anodized in black
- Front ports: 2x USB ports
- Accessories included: USB cable with terminal assign, screws, cable retainers and keys
- Power supply pack: none (standard power supply may be used)
- Dimensions (W x D x H): 482.6 x 528 x 132.6 mm
- Weight / pcs (kg): 15
Sales:
Abv:
Abv:
FANTEC SRC-2012X07, 2U 19" storage enclosure without power supply, 550mm deep
19" Storage Case for installation in 19 "industrial cabinets. Robust construction and high quality workmanship. Pre-installed backplane for mounting SAS or SATA hard disks. Expandable with telescopic rails.
- ON/OFF switch, Reset switch
- LEDs for ON/OFF, hard drive access, network access
- 1x USB 2.0 front USB-interface