InLine® Outdoor Installation cable Cat.7a PiMF 4x2x0.58 AWG23, 1200MHz, PE, black
The installation cable will be delivered in a drum box for an easy take of the required length of data cable. The packaging consists of a plastic roller so that the data cable can be rolled up. This role is fixed in a reinforced cardboard carton, which allows a simple retain of cable. Advantages of the drum-box are as follow:
- Cost reduction because of easy handling on site without additional tools for rolling up the cable
- Handy an stackable packaging
- Lightweight (can be send with standard parcel services)
- Prevention of pollution and damage because of the packaging cardboard
- Reduces average costs for small pieces of cable
- Cable for installation
- Cat 7a installation cable with up to 1200 MHz
- Architecture: 4x2xAWG23/1 PIMF
- Suitable for up to 10 GBit
- Full copper wires
- Impedance: 100Ohm DC resistance: max 87 Ohm/Km
- LDPE Cable sheath, UV resistant, making it suitable for outdoor use
- Sheath color: black
- Compliant with ISO/IEC 11801, IEC 61156-5
- Construction: pairs in metal foil
- Overall braid shielding
- Cable diameter approx. 8.2mm
- Installation temperature 0 - 50°C, operating temperature -20 - 60°C
- Printed rest-meters on the cable
InLine® Installation cable Cat.7a, S/FTP (PiMF) 4x2x0.58 AWG23, 1200MHz, B2ca halogen-free
The installation cable is delivered in a drum box for easy removal of the required length. The packaging consists of a plastic reel on which the data cable is rolled up. This roll is fixed in a reinforced cardboard box, which ensures simple and tangle-free unrolling. The reel box offers the following advantages:
- Cost reduction through easy handling on the construction site without additional unwinding device
- Handy and stackable packaging, convenient to transport in the construction site vehicle
- Low weight (can also be sent by parcel service)
- Avoidance of soiling and transport damage to the cable through repackaging by means of cardboard
- Reduction of cutting costs for small quantities
- Cable for installation
- Cat. 7a installation cable up to 1200MHz
- Construction: 4x2xAWG23/1 PIMF (0.58mm²)
- Suitable up to 10 Gbit
- Full copper cores
- Impedance: 100Ohm, DC resistance: max. 93.8 Ohm/km
- Sheath halogen-free LSZH
- Sheath colour orange
- Construction: In pairs in metal foil
- Overall braided shielding
- Cable diameter approx. 7.8mm
- Installation temperature: 0 - 50°C, Operating temperature: -20°C - 60°C, Storage temperature: -20°C - 50°C
- With remaining metre indication on cable
- Fire behaviour B2ca according to EN 50575: 2014 / A1:2016
InLine® Solid Installation Cable F/UTP Cat.5e AWG24 CCA PVC 100m
InLine® Solid Installation Cable F/UTP Cat.5e AWG24 CCA PVC
- Solid cable for installation
- F/UTP cable, Cat. 5e, 4x2xAWG 24/1, PVC
- foil shielding
- in a pullout box with EAN code
- With meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
InLine® Duplex installation cable Cat.7a PiMF 2x 4x2x0.58 AWG23, 1200MHz, LSZH, orange
The duplex installation cable is delivered in a drum box for easy refer to the required length. The packaging consists of a plastic roller on wich the data cable is rolled up. This roller is fixed in a carton, whereby a simple and unwinding is guaranteed. The following are the advantages of drum box:
- Cost reduction through easy handling on site without additional drum tooling
- easy to carry, handy and stackable packaging to pack in construction vehicle
- Lightweight (also sendable by parcel service)
- Prevention of pollution and damage to the cable by means of cardboard packaging
- reduce the average cost for small quantities
- Cable for installation
- Cat. 7a duplex installation cable to 1200MHz
- Construction: (2x) 4x2xAWG23/1 S-FTP PiMf
- Suitable up to 10Gb
- Full copper conductors
- Impedance: 100 Ohm, DC resistance: max. 87 Ohm / km
- Halogen-free jacket LSOH
- Orange sheath
- Structure: pairs in metal foil
- Overall braid shielding
- Cable diameter about 2x 8.2mm
- Installation temperature: 0 - 50°C, operating temperature: -20°C - 60°C
- With meter-printing on cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
InLine® Solid Installation Cable 250MHz S/STP Cat.6 CU AWG23 halogen free
- For installation purposes
- rigid wires
- Cat. 6 up to 250MHz
- 4x2xAWG 23/1
- Length: 50m
- PiMF, in pairs in metal foil
- S/STP, braid overall shield
- Sheath halogen-free
- With meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
InLine® Installation cable Cat.7a PiMF 4x2x0.58 AWG23, 1200MHz, LSZH, Eca
The installation cable is delivered in a drum box for easy refer to the required length. The packaging consists of a plastic roller on wich the data cable is rolled up. This roller is fixed in a carton, whereby a simple and unwinding is guaranteed. The following are the advantages of drum box:
- Cost reduction through easy handling on site without additional drum tooling
- easy to carry, handy and stackable packaging to pack in construction vehicle
- Lightweight (also sendable by parcel service)
- Prevention of pollution and damage to the cable by means of cardboard packaging
- reduce the average cost for small quantities
- Cable for installation
- Cat. 7a installation cable to 1200MHz
- Construction: 4x2xAWG23/1 S-FTP PiMf
- Suitable up to 10Gb
- Full copper conductors
- Impedance: 100 Ohm, DC resistance: max. 87 Ohm / km
- Halogen-free jacket LSZH
- Orange sheath
- Structure: pairs in metal foil
- Overall braid shielding
- Cable diameter about 8.2mm
- Installation temperature: 0 - 50°C, operating temperature: -20°C - 60°C
- With meter-printing on cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
InLine® Solid Installation Cable SF/UTP Cat.5e AWG24 CU PVC
- Solid cable for installation
- SF/UTP cable, Cat. 5e, 4x2xAWG 24/1 full copper, PVC
- braid and foil shielding
- in a pullout box with EAN code
- With meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
InLine® Solid Installation Cable SF/UTP Cat.5e AWG24 CCA PVC
InLine® Solid Installation Cable SF/UTP Cat.5e AWG24 CCA PVC
- Solid cable for installation
- F/UTP cable, Cat. 5e, 4x2xAWG 24/1, PVC
- foil shielding
- in a pullout box with EAN code
- With meter printing on the cable
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
InLine® Solid Installation Cable SF/UTP, Cat.5e, AWG24 CU, halogen free
InLine® Solid Installation Cable SF/UTP, Cat.5e, AWG24 CU, halogen free
- Solid cable for installation
- S-FTP cable, Cat. 5e, 4x2xAWG 24/1, halogenfree
- full copper conductors
- braid and foil shielding
- in a pull box with EAN code
- Reaction to fire Eca according to EN 50575:2014 / A1:2016
ATEN 2L-2910 HDBaseT SF/UTP Cat.6 Solid installation cable, 305m
The 2L-2910 is a twisted pair cable engineered for optimum signal transmission at resolutions up to 4K including digital and analogue data, audio, and video applications. The cable supports sweep frequency up to 400 MHz and has been verified to meet performance requirements set by the HDBaseT Alliance.
The 2L-2910 supports long distance connections while safeguarding transmission quality. The outer metal layer and the braid protect signal transmissions from electromagnetic interference (EMI) brought by walkie-talkies or any other radio devices and reduce the impact caused by electrical noise.
The 2L-2910 utilizes SF/UTP design with four unshielded 23 AWG twisted pair conductors. Among the four unshielded twisted pair conductors, there is one cross filler to reduce cross talk. Most importantly, the cable meets the requirements set by ANSI/ TIA-568-C.2 (2009) ensuring high performance in electrical transmission.
The 2L-2910 supports long distance connections while safeguarding transmission quality. The outer metal layer and the braid protect signal transmissions from electromagnetic interference (EMI) brought by walkie-talkies or any other radio devices and reduce the impact caused by electrical noise.
The 2L-2910 utilizes SF/UTP design with four unshielded 23 AWG twisted pair conductors. Among the four unshielded twisted pair conductors, there is one cross filler to reduce cross talk. Most importantly, the cable meets the requirements set by ANSI/ TIA-568-C.2 (2009) ensuring high performance in electrical transmission.
- Optimized for multiple distributions including HD video, audio, Ethernet, power and control
- Certified to meet performance requirements set by HDBaseT Alliance
- Supports sweep frequency up to 400 MHz
- Supports up to 4K data transmission
- Conductor material: 23 AWG bare copper
- Outer shielded material: AI Mylar tape
- Braid wire: tinned copper
- Flame test UL 1685 (CM rated), RoHS compliant
- Compatible with ATEN HDBaseT extenders and splitters
- Regulatory:
- PoE: IEEE 802.3af (PoE)/ IEEE 802. 3at (PoE+)
- Electrical Transmission: ANSI/TIA-568-C.2 (2009), ISO/IEC 11801 (Edition 2.2), IEC 61156-5 (Edition 2.1)
- Material and Construction: UL 444, CSA 22.2 NO.214
- Resistant to electromagnetic interference (EMI) / radio frequency interference (RFI) brought by walkie-talkies or any other radio devices to prevent AV signal from disturbance.
| Cable Type | Cat 6 SF/UTP |
| Conductor | |
| Size | 23 AWG |
| Construction | Solid Bare copper |
| Number of Pairs | 4 |
| Shield | |
| Material | AI Mylar tape |
| Coverage | 100% Coverage and mylar side facing out |
| Insulation | |
| Material | Polyolefin |
| Color codes | Blue & White/Blue stripe 1.08 ± 0.02 mm Orange & White/Orange stripe1.05 ± 0.02 mm Green & White/Green stripe1.08 ± 0.02 mm Brown & White/Brown stripe 1.05 ± 0.02 mm |
| Filler | Polylefin (PO) |
| Braid | Tinned Copper |
| Jacketed | |
| Material | Polyvinyl chloride (PVC) |
| Average Thickness | 0.5 mm+-0.05mm |
| Diameter | 7.4 ± 0.20 mm |
| Color | Blue |
| Electrical | |
| Dc Resistance Unbalance | = 5% |
| Conductor Resistance | = 9.38 O/100m |
| Dielectric strength | 1.5 KV ac for 2 s |
| Insulation resistance | = 5000 MO•km |
| Mutual Capacitance | = 5.6 nF/100m |
| Pair-To-Ground Capacitance Unbalance | = 330 pF/100m |
| Ac Leakage Current Througt Overall Jacket | = 10mA (1.5KV AC) |
| Spark Test | 2.5 KV DC |
| Minimum bending radius | =4 times of overall diameter |
| Delay Skew | 45.00 Max.ns/100m |
| Environmental | |
| Temperature (Operating / Storage) | -20°C to 60°C |
| Physical Properties | |
| Weight | 17.57 kg ( 38.7 lb ) |
| Cable Length | 305m / 1000ft |
ATEN 2L-2801 Low-Skew Cat.5e installation cable, 305m
What is skew?
Analog video presents a high quality image when the computer is directly connected to the monitor by short cables. However, in today’s data centers, labs, stores, as well as in digital signage installalations, video cables may be long, bulky, and expensive. To overcome these practical video cable length limits, KVM switches—in addition to both KVM extenders and VGA-only extenders—are used that send video through Cat 5e cables. "Skew" is the color phase and time errors that occur when R/G/B video signals are sent long distance over Cat 5e cables, and this can result in smeared, unsharp, color-fringed images that become visibly worse the longer the cables.
Why you need Low Skew Cat 5e Cable ?
To remedy this skew distortion, ATEN has developed the Low skew Cat 5e cable 2L-2801. This 305 m/ 1000 ft, high performance Cat 5e cable is suitable for the audio and video transmission of a wide range of video and KVM Extenders. This low skew cable is specifi cally designed for RGB video applications such as digital signage, and supports video transmissions to longer distances than traditional twisted pair Cat 5e cable does. To eliminate blur and bleeding images and to ensure the clarity of your video transmissions in all video-related applications, use 2L-2801 Low Skew Cat 5e Cable.
Analog video presents a high quality image when the computer is directly connected to the monitor by short cables. However, in today’s data centers, labs, stores, as well as in digital signage installalations, video cables may be long, bulky, and expensive. To overcome these practical video cable length limits, KVM switches—in addition to both KVM extenders and VGA-only extenders—are used that send video through Cat 5e cables. "Skew" is the color phase and time errors that occur when R/G/B video signals are sent long distance over Cat 5e cables, and this can result in smeared, unsharp, color-fringed images that become visibly worse the longer the cables.
Why you need Low Skew Cat 5e Cable ?
To remedy this skew distortion, ATEN has developed the Low skew Cat 5e cable 2L-2801. This 305 m/ 1000 ft, high performance Cat 5e cable is suitable for the audio and video transmission of a wide range of video and KVM Extenders. This low skew cable is specifi cally designed for RGB video applications such as digital signage, and supports video transmissions to longer distances than traditional twisted pair Cat 5e cable does. To eliminate blur and bleeding images and to ensure the clarity of your video transmissions in all video-related applications, use 2L-2801 Low Skew Cat 5e Cable.
- Supports high quality RGB video transmission
- 350 MHz bandwidth
- Contains 305 m/1000 ft of low skew cable
- Delay Skew: 1 ~ 350 MHz 20nS/100m Max.
- Outer Jacket Material: FR PVC
- Outer Shield Material: Unshielded
- Conductor Material: 24 AWG solid bare copper
- Compatible with ATEN analog Cat 5 video extenders, KVM extenders, and Cat 5 KVM switches
- UL, ETL approved
| Item | 24AWG × 4p |
| Cable Length | 305 m/ 1000 ft |
| Conductor Resistance | 9.38 Ohm/100m/20°C Max. |
| Mutual Capacitance | 56 Pf/M Max. |
| Dielectric strength | Ac 1.5 Kv/2 Sec. |
| Spark Test | 2.5 Kv |
| Insulation | |
| Unaged | Tensile Strength: 2400 Psi Min. (1.69 Kg/M(mxm)) Elongation: 300% Min. |
| Aged | Tensile Strength: Unaged Min. 75%(100°C×48hrs) Elongation: Unaged Min. 75%(100°C×48hrs) |
| Jacketed | |
| Unaged | Tensile Strength: 2000 Psi Min.(1.41 Kg/M(mxm)) Elongation: 100% Min. |
| Aged | Tensile Strength: Unaged Min. 85%(100°C×240hrs) Elongation: Unaged Min. 50%(100°C×240hrs) |
| Insulation Shrinkback | 150m/M, 121°C±1°C×1hr?9.5m/M |
| Cold Bend Test | -20°C×4hrs No.Crack |
| Flame Retardant Test | CMR |
| Ac Leakage Current Througt Overall Jacket | Ac 1500v?10 Ma |
| Dc Resistance Unbalance | 5% Max. |
| Pair-To-Ground Capacitance Unbalance | 330 Pf/100m Max. |
| Characteristic Impedance | 1 - 350 Mhz 100±15 Ohms |
| Structural Return Loss | 350 Mhz 10.6db Min. |
| Propagation Delay | 350 Mhz 536ns/100m Max. |
| Delay Skew | 1 - 350 Mhz 20ns/100m Max. |
| Physical Properties | |
| Weight | 9.80 kg |
