- Round slim patch cable, diameter only 4mm
- U/FTP shielded: Pairwise in metal foil (PiMf)
- meets the requirements of Cat. 6A requirements up to 500MHz
- Four wire pairs, twisted
- Full copper strands
- 1:1 assignment, color-coded according to EIA/TIA-568B
- 2x RJ45 connector, moulded, with snap-in protection
- blue coloured connector for differentiation
- PVC jacket, extra thin, for better installation in network cabinet, flexible handling
- in resealable PE bag
- Assignment according to TIA/EIA 568B2.1
- cable construction S/FTP (PiMf) 4x2xAWG26/7
- overall braided shield with paired foil shield
- Cable sheath halogen free, LSZH, conform to standards IEC 60332-1-2, IEC 60754-1, IEC 60754-2, IEC 61034 IEC332-1
- plug RJ45 (8P8C) with 50µ" gold plated contacts and with special design and latch protection
- blue colored plug for easy distinction
- For Gigabit and 10 Gigabit applications
- to 500MHz: 100% Cat.6 test and 100% Cat.6A test (Fluke Channel Link Test) including the attached test protocol and serial number
- in reclosable PE bag with EAN code
- Space-saving design for maximum port density: Approx. 40 % less space required than conventional AWG26 patch cables – ideal for network cabinets and server rooms.
- High-quality copper conductors for maximum performance: Full Cat.6A transmission quality with up to 10 Gbit/s over lengths of up to 30 meters.
- PoE support up to 87 watts (4PPoE): Enables energy-efficient operation of IP cameras, access points or VoIP telephones without additional power supply units.
- Sustainable & economical: Approx. 25% material savings reduce transportation and manufacturing costs and improve the CO₂ balance.
- Flexible, safe TPE sheath (LSZH): Flame-retardant, halogen-free and particularly flexible for narrow installation paths.
The InLine® Slim Cat.6A S/FTP patch cable series combines highest network performance with maximum space and energy efficiency. Thanks to the particularly slim design with AWG28 conductors, these cables enable a significantly higher port density in network cabinets and ensure improved air circulation, which increases cooling and efficiency.
In contrast to conventional, thinner AWG32 cables, this cable supports full Cat.6A transmission quality at up to 500 MHz and 4PPoE with up to 87 watts. This makes it the ideal solution for professional applications where a combination of space-saving, PoE capability and high performance is required.
The use of high-quality copper conductors minimizes signal loss and ensures a reliable network connection - even over distances of up to 30 metres. The S/FTP double shielding reliably protects the cable from electromagnetic interference.
In addition to its technical performance, this cable also offers ecological benefits: Approx. 25% less material used reduces transportation costs and, in the long term, environmental taxes in accordance with future Green Law requirements.
The TPE sheath (LSZH) combines flexibility with fire protection: It is halogen-free, flame-retardant and ensures minimal smoke development in the event of fire – ideal for safety-critical applications.
Additional technical specifications:
- Conductor material: Pure copper
- Cable construction: S/FTP (pair and overall shielding)
- Sheath material: TPE (LSZH – Low Smoke Zero Halogen)
- Wire gauge: AWG28
- Operating temperature: -20 to +75 °C
- Outlet diameter: 4.1 mm
- Population: 1:1 according to T568B
- PoE support: Yes, up to 87 watts (4PPoE)
- Flat patch cable
- U/FTP Shielded: Pairs in metal foil (Pimf)
- Meets the Cat.6A requirements up to 500MHz
- Four pairs twisted
- Full copper conductors
- 1:1 assignment, color-coded according to EIA/TIA-568B
- 2x RJ45, moulded, with latch protection
- Blue colored connector
- PVC jacket, extra flat
- Flexible and easy to install
- In PE slip bag with EAN code
- Cat.6A patch cable
- S/FTP (PiMf) shielding, pairs in metal foil shielded with braid overall screen
- Cable with TPE sheath, 500MHz, halogen free
- Flexible cable, resistant
- provides super small bending radium to till min.10mm
- RJ45 plug on both sides, with blue-transparent dyed plastic
- Gold plated contacts, 750 cycles min.
- 4x2xAWG26 full copper strands
- Assignment 1:1, according to T568B
- Supports POE/POE+
- In resealable PE bag with EAN code
- Cat.6A Patch cable
- S/FTP (PiMf) shielding, pairs in metal foil with braiding
- cable with PE sheet
- Resistant against oils and water, ideal for outdoor usage
- RJ45 plug on both sides, with blue-transparent inlay
- gold plated contacts, minimum 750 plug cycles
- 4x2xAWG27 full copper stranded wire
- Pin asignment 1:1, following to T568B
- POE/POE+ compatible
- for temperature range -10°C ... +60°C
- in a resealable zip bag with EAN barcode
- Cat.6A Patch cable
- S/FTP (PiMf) shielding, pairs in metal foil with braiding
- cable with PUR sheet, halogen free
- Resistant against oils, ideal for workshop use
- RJ45 plug on both sides, with blue-transparent inlay
- gold plated contacts, minimum 750 plug cycles
- 4x2xAWG26 full copper stranded wire
- Pin assignment 1:1, following to T568B
- in a resealable zip bag with EAN barcode
- Colour: black
- Side A: RJ45 plug
- Side B: RJ45 jack
- Shielding: S/FTP (PiMf)
- Type: Cat.6 A
- Signal: Network
- Cross-section: AWG 27
- Variant: 1:1 assigned
- Data transmission rate: up to 10 Gb/s
- Conductor material: Copper
- Sheath: halogen-free (LSZH)
- flat patch cable
- U/FTP Shielded: In pairs in metal foil (PiMf)
- fulfils the Cat.6 A requirements up to 500MHz
- Four core pairs, twisted
- solid copper strands
- 1: 1 assignment, colour-coded according to EIA/TIA-568B
- 2x RJ45 plug, moulded, with latching lug protection
- Blue coloured plug for differentiation
- Halogen-free TPE jacket
- flexible and easy to install
- in a resealable PE bag with EAN code
- Cost-efficient network solution with high-quality CCA alloy: 40% copper content for improved conductivity and reduced signal loss.
- Powerful for modern networks: Supports up to 10 Gbit/s and a bandwidth of 500 MHz for stable connections.
- 4PPOE support for maximum efficiency: PoE, PoE+ and PoE++ with up to 90 watts of power for network devices such as cameras, access points or VoIP telephones.
- Flexible, flame-retardant cable sheath: The TPE sheath (LSZH) offers high flexibility for tight installation conditions and reduces smoke development in the event of fire.
- Safe & interference-free connection: S/FTP shielding (pair and overall shielding) reliably protects against electromagnetic interference.
The InLine® Cat.6A S/FTP patch cable is the perfect choice for network infrastructures that require high performance at an economical price. Thanks to a high-quality CCA alloy of copper-clad aluminum conductors with 40% copper content, it offers improved conductivity compared to conventional CCA cables. This reduces electrical resistance and enables stable transmission at up to 10 Gbit/s over distances of up to 10 meters.
Another advantage: the cable is 4PPOE-capable and supports PoE, PoE+ and PoE++ with up to 90 watts of power. This means that IP cameras, VoIP telephones and access points can be efficiently supplied with power via the network cable - a cost-effective solution for professional applications.
The double shielding (S/FTP) minimizes interference and ensures a stable connection even in demanding environments such as data centers, industrial halls or office buildings. The halogen-free TPE jacket (LSZH) is not only flame-retardant, but also particularly flexible – ideal for installations with limited space.
Please note: Due to the material properties of CCA, this cable is limited to lengths of up to 10 meters. For longer distances, we recommend our copper patch cables, which guarantee consistent signal quality.
Additional technical specifications:
- Conductor material: High-quality CCA alloy made from copper-clad aluminum conductors (40% copper)
- Sheath material: TPE (LSZH – flame retardant, halogen-free, flexible)
- Operating temperature: -20 to +75 °C
- Outlet diameter: 6.0 mm
- Population: 1:1 according to T568B
- PoE support: 4PPOE, compatible with PoE/PoE+/PoE++ (up to 90 W)
- Cable type: Cat.6A U/FTP
- Conductor: 28AWG
- Insulation material: HDPEJacket: PVC
- Outer diameter: 7.3mm (OD)
- Connector type: 8P8C (RJ45) with 50µ" gold-plated contacts
- Plug type: Fully shielded crimped plug
- Inner jacket: SUS204 (stainless steel)
- Outer sheath: Highly elastic PVC
- Temperature range: Installation 0 to 50 °C, operation -20 to 60 °C
- Bandwidth: 500MHz
- Rated voltage: 30V
- PoE/PoE+/PoE++: (up to 90W)
- Force resistance with short pressure: 2000 N
- Force resistance with sustained pressure: 500 N
- Electrical properties:
- Conductor DC resistance: 28.4 O/100m (maximum)
- Impedance: 100 O
- Capacitance: 5600pF/100m
- Propagation delay: 545ns/100m (maximum)
- Delay: 45 ns/100m (maximum)
- Certification: Passes Fluke DSX 8000 channel test
- 2x RJ45 socket
- unshielded connection 1:1 (8-pin)
- can be used for network connections up to 100Mb/s
- Patch cable U/UTP Cat.6 A with robust metal connectors
- Full copper wires AWG23
- Channel test approved cable
- Supports AV applications / HDBaseT up to 4K/30Hz
- PoE/PoE+ compatible
- 1:1 pinout, 4 twisted pairs
- Screwed metal connectors with gold-plated contacts, which can also be reconnected without special tools
- Sheath halogen-free (LSZH), diameter approx. 7.6mm, black
- High mobility for temporary network installations: The robust cable reel with 80 m Cat.7 S/FTP installation cable enables flexible, secure Ethernet connections in changing environments.
- Reliable signal transmission even over long distances: The S/FTP PiMF shielding with 1000 MHz ensures interference-free performance - ideal for sensitive IT infrastructure.
- Immediately ready for use with high-quality connections: Integrated Cat.6A-RJ45 data socket with dust protection and Cat.6A keystone module at the end of the cable offer maximum compatibility.
- Easy handling thanks to compact design: The reel with sturdy handle is easy to transport and can be rolled up and unrolled quickly - perfect for mobile IT teams.
- Striking cable colour for better visibility: The orange sheathing increases visibility in the event environment and minimises the risk of tripping during installation.
The InLine® network cable reel Cat.6A network cable reel is the ideal solution for professional users who need to realise temporary Ethernet routes reliably and quickly. Equipped with an 80 m long, highly shielded Cat.7 S/FTP PiMF installation cable with a bandwidth of 1000 MHz, this product offers interference-free signal transmission over long distances - even in demanding IT environments.
Thanks to the integrated Cat.6A data socket (RJ45) with dust protection cap and a high-quality Cat.6A keystone socket at the end of the cable, devices and networks can be connected directly without additional tools. The compact cable reel with handle makes it easy to transport and allows for quick set-up on site - whether for conferences, training courses, trade fairs, live streaming events or IT maintenance.
With a temperature range of -5 °C to +70 °C, the reel is also suitable for use outdoors or in industrial environments. The eye-catching orange cable colour ensures better visibility and increases safety during events.
- Cable length: 80 m
- Cable type: Cat.7 S/FTP PiMF, 1000 MHz
- Connections: 1× RJ45 Cat.6A Keystone / 1× RJ45 Cat.6A socket with dust protection
- Temperature range: -5 °C to +70 °C
- Colour: Orange
- Drum size with handle: 355×420×240 mm
- For extreme outdoor conditions: The robust cable drum with PUR jacket is abrasion-resistant, UV-resistant and resists bending, pulling and cracking - ideal for industry and outdoor use.
- Reliable gigabit performance with Fluke test: The Cat.6A S/FTP cable enables transmissions up to 10GBase-T, tested according to Fluke Channel Standard – high network security guaranteed.
- PoE/PoE+/PoE++ support for maximum flexibility: Supplies IP cameras, access points or devices with power and data via just one cable – perfect for temporary outdoor installations.
- Pre-assembled on a durable IP67 reel: The lightweight but sturdy reel reliably protects the cable and facilitates transport, unwinding and retraction – efficient handling.
- Pure copper, double-shielded for high EMC resistance: The four twisted 23AWG conductor pairs guarantee high interference resistance - even with electrical interference sources in industry or events.
The InLine® Cat.6A network cable reel with PUR outer jacket is the ideal solution for temporary network installations in harsh environments. Developed for use under the harshest conditions, it offers reliable data transmission with the highest mechanical and electrical resilience - in outdoor applications as well as in industrial plants, on construction sites or at large events.
The cable has four twisted copper conductor pairs (23AWG) with double S/FTP shielding and achieves transmission speeds of up to 10GBase-T. It is Fluke Channel tested and supports Power over Ethernet at all levels (PoE, PoE+, PoE++). This makes it ideal for connecting surveillance cameras, media hardware or temporary workstations - even in direct sunlight, high humidity or dirt.
The robust, UV and abrasion-resistant PUR sheathing protects against external influences, while the pre-assembled, IP67-compliant cable reel guarantees convenient use. Gold-plated RJ45 plugs ensure long-lasting connection quality.
- Category: Cat.6A S/FTP
- Plug: Gold-plated RJ45 plug
- Conductor material: Pure copper, 4x2x23AWG
- Outlet diameter: 7.8 ± 0.20 mm
- Sheath material: PUR, UV and abrasion resistant
- Reel protection class: IP67-compliant
- Nominal voltage: 30 V
- Fluke channel test: Up to 10GBase-T
- Supports: PoE, PoE+, PoE++
- Coil: Robust, lightweight, transportable
- IP67 connections with HARTING PushPull technology: The robust RJ45 metal connectors at both cable ends ensure reliable network connections in damp, dusty or harsh environments.
- Industrial-grade protection thanks to PUR jacket: Resists abrasion, UV radiation, bending and pulling; ideal for outdoor use at events, machines or mobile workstations.
- Gigabit data transmission with EMC protection: Cat.6A S/FTP cabling with 23AWG copper conductors and Fluke test up to 10GBase-T offers the highest transmission quality even with electromagnetic interference.
- PoE++-capable for maximum power supply: Supports modern end devices such as IP cameras, LED systems or industrial sensors - power and data via a single cable.
- Reliable use with IP67 coil: The pre-assembled cable reel provides mechanical and electrical protection – for efficient and fast installation on the move or on site.
The InLine® Cat.6A network cable reel with HARTING PushPull RJ45 connectors has been specially developed for outdoor use and industrial applications. The cable reel offers robust network connections under high loads, difficult environmental conditions and maximum security. Thanks to push-pull metal connectors (V14, IP67) on both sides with an integrated locking mechanism, connections can be realised reliably and quickly even in confined environments.
The double-shielded Cat.6A S/FTP cable with 23AWG copper conductors is PUR-coated, abrasion-resistant, UV-resistant and can withstand even heavy loads such as bending or pulling. It supports PoE, PoE+ and PoE++ as well as data rates up to 10GBase-T (Fluke Channel tested) - ideal for supplying power and data to modern outdoor components.
The IP67 cable reel is lightweight, portable and pre-installed – suitable for industrial maintenance, mobile networks, security applications, event technology or emergency communications. Developed for system houses, IT service providers, network technicians and event organisers who rely on reliable network connections under the toughest conditions.
- Category: Cat.6A S/FTP
- Conductor material: Pure copper, 4x2x23AWG
- Sheath material: PUR, UV & abrasion resistant
- Outlet diameter: 7.8 ± 0.20 mm
- Connector: RJ45 HARTING PushPull (V14), metal, on both sides
- Protection class: IP67 for cable, plug and reel
- &Transmission: Up to 10GBase-T, Fluke Channel tested
- PoE support: PoE, PoE+, PoE++
- Nominal voltage: 30 V
- Colour: black
