ATEN UC232A/A1 USB to RS-232 Adapter
The UC232A USB-to-RS232 serial port converter is the ideal accessory for laptop and desktop computers that do not have a COM or DB9 serial port. Supporting both PC and Mac systems with baud rates up to 921.6 Kbps for rapid performance, it offers a convenient connectivity solution for industrial automation systems, scientific instruments, point of sale systems, and other specialized industrial and consumer applications.
The UC232A now supports mobile devices as a computing host (Android 3.2 and above). The UC232A SDK is available for download in the Support and Downloads section.
- Full compliance with the USB Specification.
- Support the RS232 Serial interface.
- Up to 921.6 Kbps data transfer rate.
- Simple installation
- OS Compatibility: Windows, Mac, Linux
| Connectors | |
| USB-Port | 1 x USB Type A Male (White) |
| Serial | 1 x DB-9 Male (Silver) |
| Data Rate | Up to 921.6 KBps |
| Cable Length | 35cm |
| LEDs | Power (Orange) |
| Power Mode | Bus Powered |
| USB Specification | USB compliant |
| Environmental | |
| Operating Temperature | 0–40°C |
| Storage Temperature | -20–60°C |
| Humidity | 0 – 80 % RH, Non-condensing |
| Physical Properties | |
| Housing | Plastic |
| Weight | 0.04 kg (0.09 lb) |
| Dimensions (L x B x H) | 6.59 x 3.40 x 1.60 cm (2.59 x 1.34 x 0.63 in.) |
| Note | For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format. |
InLine® USB to Serial Adapter Cable USB Type A male / DB9 male approx 0.2m
This USB to serial adapter enables you to connect different serial devices like mice, modems, etc. to a USB port.
- USB specification revision 1.1
- easy installation
- data transfer up to 1Mbps
- USB type A connector to DB9 male connector
- System requirements: one free USB port, for Win XP and above or Mac 8.6 or higher
- Prolific Chipset PL-2303
InLine® USB 2.0 to Serial Adapter Cable USB Type A male / DB9 male 0.25m
USB 2.0 -> serial adaptor cable, InLine®, USB AM to DB9M, 0.25m
- For mobile phone, modem, PDA, digital photo camera and TK devices with serial port
- USB 2.0 and 1.1 compliant
- Supports RS232 serial interface DB9
- Supports over 1Mbps data transfer rate
- Supports remote wake - up and power management
- Available for USB 2.0 /1.1 port
- Supports Win 2000/XP/Vista/Vista 64/Server 2008/7, Linux and Mac OS V8.6 or higher
- FTDI Chipset
InLine® USB-C to serial adaptor cable, USB C Male / DB9 Male + adapter, 1.8m
This USB to serial adapter cable allows you to operate various serial devices at the current USB interface type C
- USB Type C male to 9-pin Sub D male connector
- Cable length: 1.8m
- incl. AT Adapter 9-pin Sub-D female to 25-pole Sub-D male connector
- Data Transfer Rate 1Mbps and higher
- Supports remote wake-up and power management signals
- Can be used for serial devices such as modems, PBX, ISDN system, PDA, and other serial devices
- Supports RS232 serial interface, an additional COM port will created
- For Windows 10, 8, 7, Vista, XP, 2000 and Mac OS 8.6
- FDTI FT232RL chipset
InLine® USB to Serial Adapter Cable USB Type A male / DB9 male 1.8m
This adapter converts the USB port to RS-232 and allows the connection of e. g. modem, ISDN systems or PDA to the USB port without occupying the serial interface of the computer.
- USB 1.1 compatible
- Simple installation
- Over 500KBit/s data transmission
- Requires no interrupt
- USB A male plug to 9pin Sub D male connector
- Length approx. 1.8m
- With adapter 9-pin female to 25-pin male connector
- Drivers for Server2003 / Server2008 / Server2008R2 / Server2012 / Win2000 Sp4 / XP / Vista / Win7 / Win8 / Win10 (32/64bit)
- Chipset: PL-2303RA
- Content of delivery: USB to serial adapter cable 1.8m, Serial converter DB9F to DB25M, Manual, Driver-CD
ATEN UC2324 USB to 4x serial converter hub, 1x USB to 4x 9pol RS232
4-Port USB-to -Serial RS-232 Hub. The ATEN USB-to-Serial RS-232 Hub provides an external plug-and-play RS-232 serial connection for computers, notebooks, laptops, and handheld computing devices that support the USB specification. It provides a quick, simple, and cost-effective solution and is ideal for various communication and automation applications.
- Device Connections: 4
- 1x USB Typ B Female (white)
- Serial: 4 x DB-9 Male (Black)
- Power: 1x DC Jack
- LEDs:
- Port Status: 4 (green)
- Power: 1 (Orange)
- Data Transfer Rate: 115.2 Kbps (max.)
- USB-Specification: USB 1.1 Compliant; USB 2.0 Compatible
- RS-232-Signal: TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Data Bit: 5, 6, 7, 8
- Stop Bit: 1, 1,5, 2
- Power Mode: Bus Powered; use of Power Adapter is optional
- Power consumption: 0,6 W
- Operating Temp.: 0 - 50 °C
- Storage Temp.: -20 - 60 °C
- Humidity: 0-80% RH, Non-condensing
- Housing: Metal
- Weight: 0.32 kg
- Dimension (L x W x H): 12.50 x 8.15 x 2.50
- Package Contents: 1x USB-to-Serial Hub, 1x USB Cable, 1x Installation Disk, 1x User Instructions
InLine® USB to Sub-D 9 Pin Serial Adapter Cable Premium
This adapter converts the USB port to RS-232. It enables the connection of e.g. modems, ISDN systems or PDAs to the USB port without occupying the serial interface. Supplied with driver and instructions.
- With ferrite core in the cable
- Compatible with USB standard V1.1
- Simple installation
- Over 500KBit/s data transmission
- Does not require an interrupt
- USB plug type A to 9-pin Sub D plug
- Length approx. 0.2m
- For Win98/ME/2000/XP/Vista/7 and Mac OS (8.6, 9.0, X)
- Chipset: PL-2303
- Supplied without driver, can be downloaded at inline-info.com
ATEN UC485 USB to RS-422/485 Adapter Cable, 1.2m
The ATEN UC485 is a high quality industrial adapter cable designed to instantly add an RS-422/485 port to your PC or laptop via a USB port. The adapter is powered via the USB connection without needing an external power supply.The UC485 adapter lets you use a single USB connection to create plug-and-play serial transfers without additional cables or complicated device installations. It lets you connect any RS-485 or RS-422 device to your computer's USB port, without experiencing computer lock-ups, I/O or driver problems. It is the ideal solution for connecting industrial devices such as laboratory machines, measuring equipment, automated systems, monitoring devices, and many more – where mission-critical applications are required.
Package Contents:
- Converts a USB port to a Legacy RS-422 or RS-485 COM port
- Fast COM Port Transmission – up to 921.6 Kbps
- Package included DB-9 female to terminal block adapter for easy wiring
- Supports Terminal / ECHO mode by mode selector
- Supports Windows Vista / 7 and above, Mac and Linux
- Plug-and-Play – no power supply needed
| Connectors | |
| USB Port | 1 x USB Type A Male (White) |
| Serial | 1 x DB-9 Male (Silver) |
| Data Rate | Up to 921.6Kbps |
| Cable Length | 1.2m |
| LEDs | Power Status / RS-422 (Orange), RS-485(Green) |
| Power Mode | Bus Powered |
| USB Specification | USB compliant |
| Environmental | |
| Operating Temperature | 0–40°C |
| Storage Temperature | -20–60°C |
| Humidity | 0–80% RH, Non-condensing |
| Physical Properties | |
| Housing | Plastic |
| Weight | 0.09 kg ( 0.2 lb ) |
| Dimensions (L x W x H) | 9.53 x 4.10 x 2.20 cm (3.75 x 1.61 x 0.87 in.) |
- 1x UC485 USB to RS-422/485 Adapter
- 1x Terminal Adapter
- 1x User Instructions
InLine® USB to PS/2 Converter USB Type A male / 2x PS/2 female
This USB to PS/2 converter allows you to use a PS/2 mouse or PS/2 keyboard with one USB port.
- USB -> PS/2 Converter for PS/2 mouse and PS/2 keyboard
- Supports Win 2000, XP, Vista, Win 7, Netware 4.11, 5.0, HP Unix, Linux MacOS ab 8.6 and SUN Microsystems platforms
- Conform to the USB 1.1 specifications
- Installation without drivers
- Power form USB port, no extra power required
InLine® USB to RS232 Adapter USB A to 9 Pin Sub-D USB extension 0.8m
This adapter converts the USB port into RS-232. It enables the connection of for example modem, ISDN system or PDA to the USB-port without tying up the serial port of the computer. Delivery with manual and driver.
- Compatible with USB standard V1.1
- Simple installation
- Above 500Kbit/s data transfer
- Does not require an interrupt
- USB plug type A to 9-pin Sub D plug
- USB extension, length 0.8m
- Driver for Windows (XP or later) and Mac OS (8.6 or later)
- Chipset: PL-2303
InLine® USB Printer Cable USB Type A male / DB25 female 1.8m
Enables the connection of conventional parallel printers to a USB port. The adapter supports IEEE1284. The adapter only works in conjunction with standard Windows printer drivers, advanced or complex printing utilities are not supported.
- 25-pin D-Sub socket to USB plug type A
- for easy connection to the printer cable
- Length approx. 1.8m
- for 98SE/2000/XP/Vista/7
- PROLIFIC PL2305 chipset
InLine® USB 2.0 to 2x Serial Adapter Cable USB Type A to 2x 9 Pin SubD male 1.5m
With this USB 2.0 to 2x serial adapter cable you can add 2 more serial ports to your system.
- complies with USB 2.0 specifications
- 2 serial RS232 connectors 9pol. Sub D connector
- Data transfer rate up to approx. 1 MBit/s
- Provides 2 independent serial ports
- PDA and modem can be connected
- Chipset FTDI FT2232
- For Windows 2000 and higher, Linux and Mac OS X and higher
- length: approx. 1.5m
ATEN UC10KM USB -> PS/2 converter, USB male / 2x PS/2 female, 90cm
Aten UC10KM is a converter with 90cm cable. It can convert signals from PS/2 (keyboard and mouse) into USB signals and supports several operation systems to satisfy user requirements.
- PS/2 keyboard and PS/2 mouse to USB operation
- Supports PS/2 mouse and Microsoft IntelliMouse
- compatible with Aten USB KVM selector switches
- USB 1.1 compatible
- Non-Powered, no power supply required
- Easy installation - no software required
- OS Support: Windows, Linux Redhat 7.0 or up
Aten IC485S, RS232/RS485 Interface Converter
RS-232 / RS-485 Interface ConverterIC485S is a 2-way converter for converting RS-232 signals to and from RS-422/RS-485 signals in long-distance application up to 1200m (4000 ft.). It supports the connection of up to 32 hubs.Features
- Data transmission controlled by the RTS signal
- DCE/DTE selectable
- Point to point, multidrop and simplex/duplex link selection
- Four wire full duplex, two wire half duplex
- Compact size
- Cable distance of up to 1200m (4000 ft.)
- Monitor configuration support
- Supports baud rates up to 115.2 kbps
- OS Support: Windows 2000, Windows XP
- Connectors: 1 DB-25 Female (RS-232), RS-485 / RS-422 Four Terminal Block, 1x RJ-11 Female
- Switches: SW1: DCE, DTE, Monitor / SW2: TxON, RxON, TxRTS, RxRTS, TxRTS, RxON
- Power Consumption: DC9V, 1.35W (max.)
- Signal Range: 1200 m (4000") max.
- Data Rate: Up to 100 Kbps under 1200 m (4000")
- Operating Temperature: 0 - 50°C
- Storage Temperature: -20 - 60°C
- Humidity: 0-80% RH, Non-condensing
- Housing: Plastic
- Weight: 60 g
- Dimension (L x W x H): 5.40 x 7.45 x 1.85 cm
- 1x Bi-directional Converter
- 1x Power Adapter
- 1x User Instructions
| Connectors | 1 DB-25 Female (RS-232) RS-485 / RS-422 Four Terminal Block 1x RJ-11 Female |
| Switches | DCE, DTE, Monitor TxON, RxON TxRTS, RxRTS TxRTS, RxON |
| Power Consumption | DC9V:0.82W:2BTU/h Note: ● The measurement in Watts indicates the typical power consumption of the device with no external loading. ● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded. |
| Signal Range | 1200 m [4000'] (Max) |
| Data Rate | Up to 100 Kbps under 1200 m [4000'] |
| Environmental | |
| Operating Temperature | 0 ~50˚C |
| Storage Temperature | -20 ~ 60˚C |
| Humidity | 0~80% RH, Non-condensing |
| Physical Properties | |
| Housing | Plastic |
| Weight | 0.05 kg ( 0.11 lb ) |
| Dimensions (L x W x H) | 7.90 x 5.45 x 2.10 cm (3.11 x 2.15 x 0.83 in.) |
Aten IC485SI, RS232/RS485 Interface Converter
RS-232 / RS-485 Interface Converter
IC485SI transfers data according to RTS (transfer requests) signal control. It supports point-to-point and multipoint communication, simplex/duplex connections, and is switchable between full duplex and half duplex, and DCE and DTE. It needs no external power supply and is the most economical and reliable option.
Features
IC485SI transfers data according to RTS (transfer requests) signal control. It supports point-to-point and multipoint communication, simplex/duplex connections, and is switchable between full duplex and half duplex, and DCE and DTE. It needs no external power supply and is the most economical and reliable option.
Features
- Data transmission controlled by the RTS signal
- DCE/DTE selectable
- Point to point, multidrop and simplex/duplex link selection
- Four wire full duplex, two wire half duplex
- Compact size
- Cable distance of up to 1200m (4000 ft.)
- Monitor configuration support
- Supports baud rates up to 115.2 kbps
- OS Support: Windows 2000, Windows XP
- Connectors: 1 DB-25 Female (RS-232), RS-485 / RS-422 Four Terminal Block, 1x RJ-11 Female
- Switches: SW1: DCE, DTE, Monitor / SW2: TxON, RxON, TxRTS, RxRTS, TxRTS, RxON
- Power Consumption: DC9V, 1.35W (max.)
- Signal Range: 1200 m (4000") max.
- Data Rate: Up to 100 Kbps under 1200 m (4000")
- Operating Temperature: 0 - 50°C
- Storage Temperature: -20 - 60°C
- Humidity: 0-80% RH, Non-condensing
- Housing: Plastic
- Weight: 60 g
- Dimension (L x W x H): 5.40 x 7.45 x 1.85 cm
- 1x Bi-directional Converter
- 1x Power Adapter
- 1x User Instructions
ATEN UC232C Converter USB-C to Serial RS232 9pin Sub D Adapter Cable, 0.3m
The UC232C is a USB-C to RS-232 adapter that enables legacy serial device connectivity for laptops / PCs without a COM / DB-9 serial port. Supporting both Windows and Mac platforms with data transfer rates up to 921.6 Kbps for rapid performance, it serves as a convenient connectivity solution for industrial automation systems, scientific instrument, point of sale systems, and any specialized industrial and consumer applications.
- Supports RS-232 serial interface
- Excellent anti-electromagnetic interference (anti-EMI) capability for stable transmission performance
- Full compliance with USB specifications
- Supports up to 921.6 Kbps data transfer rates
- OS Compatibility: Windows, Mac, and Linux
- Works with legacy serial devices
| Connectors | |
| USB Port | 1 x USB Type C Male |
| Serial | 1 x DB-9 Male |
| Data Rate | Up to 921.6 Kbps |
| Cable Length | 45cm |
| LEDs | Power (Orange) |
| Power Mode | Bus Powered |
| USB Specification | USB compliant |
| Environmental | |
| Operating Temperature | 0–40°C |
| Storage Temperature | -20–60°C |
| Humidity | 0–80% RH, Non-condensing |
| Physical Properties | |
| Housing | Plastic |
| Weight | 0.04 kg ( 0.09 lb ) |
| Dimensions (L x W x H) | 6.59 x 3.40 x 1.60 cm (2.59 x 1.34 x 0.63 in.) |
ATEN UC1284B Printer adapter cable USB to Parallel IEEE1284, 1.8m
UC1284B is a USB to parallel port converter. It converts the USB on PCs, notebook PCs and handheld computing devices into a parallel port for printer connection. Fully bidirectional to ensure compatibility with today's latest printers.
| Connectors | |
| USB-Port | 1 x USB Type A Male (White) |
| Printer | 1 x C-36 Male |
| Data Rate | 1.2 Mbits/Sec |
| Cable Length | 1,8m |
| LEDs | N/A |
| Power Mode | Bus Powered |
| USB Specification | USB compliant |
| Environmental | |
| Operating Temperature | 0-40°C |
| Storage Temperature | -20–60°C |
| Humidity | 0 – 80 % RH, Non-condensing |
| Physical Properties | |
| Housing | Plastic |
| Weight | 0.11 kg (0.24 lb) |
| Dimensions (L x B x H) | 5.30 x 4.30 x 1.95 cm (2.09 x 1.69 x 0.77 in.) |
Package Contents
1x UC1284B
1x User Instructions
ATEN UC2322 Converter USB to 2x Serial RS232 9pin Sub D
The ATEN USB-to-Serial RS-232 Hub provides an external plug-and-play RS-232 serial connection for computers, notebooks, laptops, and handheld computing devices that support the USB specification. It provides a quick, simple, and cost-effective solution and is ideal for various communication and automation applications.
- Easy way to add 2 RS-232 serial ports
- Fully compliant with USB 1.1, USB 2.0 compatible
- Supports RS-232 serial interface
- Supports automatic handshake mode
- Up to 115.2 Kbps data transfer rate for each serial port
- Supports remote wake up and power management
- Dual data buffers for each upstream and downstream data transfer
- No IRQ, DMA, I/O address resources required
- Supports hot-swapping and plug-and-play
- Built-in 16KV ESD protection
- Supports both bus power and external power
- Works with cellular phones, PDAs, digital cameras, modems and ISDN terminal adapters
- OS support - Windows 2000/2003/XP/NT/Vista
- Package Content: 1x USB-to-Serial Hub, 1x USB Cable, 1x Installation Disk, 1x User Manual, 1x Quick Start Guide
ATEN CV10KM USB to PS/2 Converter, 0.8m
The CV10KM is a USB to PS/2 signal converter that converts USB keyboard and mouse signals into PS/2 signals. When installed with the KE / CN / RCM series products, it eliminates the high cost with replacing KVM switches. With the compact and bus-powered design, the CV10KM fits perfectly into most of the PS/2 computers.
- Converts USB keyboard and mouse signals into PS/2 signals
- Compatible with all KE / CN / RCM series transmitters
- USB 2.0 compliant
- Embeds pushbutton for firmware upgrade
- Multiplatform support – Windows and Linux
- Bus Powered (via the USB and PS/2 cables)
- Plug and play
- 1x USB to PS/2 Converter (80 cm)
- 1x user instructions
| Connectors | |
| Keyboard | 1 x PS/2 6-pin Mini-DIN Male (Purple) 1 x USB Type A Female (Purple) |
| Mouse | 1 x PS/2 6-pin Mini-DIN Male (Green) 1 x USB Type A Female (Green) |
| Power (Optional) | 1 x USB Type A Male (Black) |
| Cable Length | 80cm |
| Reset Button | 1 x Push Button |
| Platforms | Windows/Linux |
| USB Specification | USB 1.1 - 2.0 (Full speed & Low speed) Compatible |
| Power Mode | Bus Powered (via the USB and PS/2 cables) |
| Power Consumption | DC5V:0.2W:5 |
| Environmental | |
| Operating Temperature | 0–50°C |
| Storage Temperature | -20–60°C |
| Humidity | 0–80% RH, Non-condensing |
| Physical Properties | |
| Housing | Plastic |
| Weight | 0.11 kg ( 0.24 lb ) |
| Dimensions (L x W x H) | 8.45 x 3.40 x 2.21 cm (3.33 x 1.34 x 0.87 in.) |
| Note | For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format. |
ATEN UC232B USB to RJ-45 (RS-232) Console Adapter, 1.2m
The ATEN UC232B is a one port USB-to-Serial console adapter. This high quality industrial adapter cable is designed to instantly add single RS-232 console port connectivity for networking appliances via a USB port. The adapter is powered via the USB connection. The UC232B is compatible with the USB 2.0 standard and works conveniently with desktop and notebook PCs. It also can be used with large integrated computer-based systems or other specialized applications, such as point-of-sale applications, networking equipment, industrial automation systems, and native serial transfer instruments to offer a convenient connectivity solution. The UC232B converter provides a plug & play solution. Windows, Mac and Linux drivers are included.
- Converts a USB port to RJ-45 Console port (RS-232)
- Support straight RJ45 cable, no need to use Rolled RJ45 Cable for connecting Networking Router, modem or network switch for configuration
- Fast COM Port Transmission–up to 921.6 Kbps data transfer rate
- COM retention saves the assigned port settings for the device
- OS Compatibility: Windows, Mac, Linux
- Plug-and-Play – Small and lightweight make it a perfect travel companion
- No external power supply needed
- 1x USB to RS-232 Console Adapter
- 1x User Instructions
| Connectors | |
| USB Port | 1 x USB Type A Male (White) |
| Serial | 1 x DB-9 Male (Silver) |
| Data Rate | Up to 921.6Kbps |
| Cable Length | 1.2m |
| LEDs | Power Status |
| Power Mode | Bus Powered |
| USB Specification | USB compliant |
| Environmental | |
| Operating Temperature | 0–40°C |
| Storage Temperature | -20–60°C |
| Humidity | 0–80% RH, Non-condensing |
| Physical Properties | |
| Housing | Plastic |
| Weight | 0.06 kg ( 0.13 lb ) |
| Dimensions (L x W x H) | 2.56 x 5.84 x 2.23 cm (1.01 x 2.3 x 0.88 in.) |
| Note | For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format. |
