category overlay image

Latest Newsletter

Flexible & safe: InLine wall mounts for TVs, beamers and more

All offers valid until: Wednesday, 05/29/24
Please log in to open the newsletter.
New
Ansmann Lithium Photo battery 3V CR123A, 1 pcs. blister (5020012)
Lithium Photo battery CR123A for use in cameras, digital cameras and other devices.
  • Output voltage: 3V
  • Dimensions: 33mm high, 17mm diameter
  • Other model names with identical construction: K123LA, EL123AP, DL123
Item no.: 01061
The item is on order, a delivery date will follow shortly.

New
ATEN AP206 2x 120W amplifier with DSP
ATEN AP212 is a dual-channel DSP-equipped amplifier that delivers 120 W per channel in a compact enclosure. The support for balanced / unbalanced line level inputs and the capability of driving 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems have made AP212 suit a wide range of public address applications. Configurable through an intuitive WebGUI, the built-in DSP allows Speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and extensive audio system protection purposes. Ground lift is deployed to eliminate unwanted hum noises from power circuit. Immersive sound experience is delivered with no compromise on power efficiency thanks to the amplifier’s Class-D design and ENERGY STAR qualification, conserving energy while lowering operational costs. Customizable Auto Standby mode enables the AP212 to automatically switch to “sleep” when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes.

Speaking of the system protection circuit, the AP212, along with the speakers connected to it, are prevented from damages led by shorted outputs, over / under-voltage, high frequency overload, and overtemperature. Plus, the amplifier will be muted when the heat sink temperature exceeds the limit. The fanless design avoids fan noise and prevents dust from building up inside the chassis.

Engineered to deliver the ultimate flexibility, the AP212 features an expansion slot for plugging in AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals. The amplifier can also be integrated with VK Control System via RS-232 and Ethernet connection for comprehensive control even from a distance. Mounting hardware is available for rack or surface-mounting depending on the installation needs. With a rich set of features, the AP212 assures reliable amplification with professional audio quality and high power efficiency for any enterprise-grade applications that require high quality sound reinforcement and distribution.
  • A dual-channel DSP-equipped amplifier that delivers 120W per channel in a compact enclosure
  • Supports balanced / unbalanced line level inputs and drives 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems
  • Built-in WebGUI-configurable DSP allows speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and system protection
  • Ground lift deployed to eliminate unwanted noises from power circuit.
  • Class-D design with ENERGY STAR qualification for high power efficiency
  • Customizable Auto Standby mode – Amplifier automatically switches to “sleep” when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes
  • Integrated protection circuit – Protects the system from damages caused by Amp shortcut, Amp output over/under voltage, high frequency overload, and overtemperature
  • Amplifier will be muted when the heat sink temperature exceeds the limit
  • Fanless design – Avoids fan noise and prevents dust from building up
  • Expansion slot for add-on expansion card – Install AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals
  • Supports VK Control System via RS-232 and Ethernet connection
  • Supports rack or surface-mounting
  • Firmware upgradable
Package Contents
1x AP212 Power Amplifier with DSP
1x rack mount / surface mount kit
1x foot pad set (4 pcs)
2x 3-pin Euroblock connectors with strain relief (3.5mm)
1x 5-pin Euroblock connector with strain relief (3.5mm)
1x 4-pin Euroblock connector with screw lock (5.08mm)
1x 3-pin Euroblock connector (3.5mm)
1x power cord
1x user instructions

System Specification
Rated Power120Wrms / 240Wpeak per Channel @4O
240Wrms / 480Wpeak @70/100V Under Bridge Mode
DistortionTHD+N: <0.1%, 1kHz, 3dB before clipping
Frequency Response50~20kHz, +/-3dB @4O, 1W
SensitivityBalanced: +4dBu
Unbalanced: -10dBV
(0dBu=0.775Vrms, 0dBV=1Vrms)
Amplifier TypeClass D
Audio Inputs
Interfaces2 x 3-pin 3.5mm Euroblock (Bal/Unbal Line In)
ImpedanceBalanced: 20kO / Unbalanced: 10kO
Detect Threshold-50dBu
Audio Outputs
InterfacesLine Output: 1 x 5-pin 3.5mm Euroblock
Speaker Output: 1 x 4-pin 5.08mm Euroblock
ImpedanceLo-Z: 4O / Hi-Z: 70V (20O), 100V (40O)
Line Output: 600O
Audio EffectsBuilt-In DSP
ProtectionOutput Shortcut
AMP Output over/under voltage
High Frequency Overload
Thermal Protect
Communication
RS-232Connector: 3-pin, 3.5mm, Terminal Block
Baud rate and protocol:
Baud Rate: 19200, Data Bits: 8, Stop Bits:1, Parity: No, Flow Control: No
Compliance
CertificationFCC, CE, UKCA
Power
Maximum Input Power Rating100-240V~, 50/60Hz, 4A with PFC
Power ConsumptionAC110V:41.9W:196BTU
AC220V:39.6W:186BTU
Environmental
Operating Temperature0~50?
Humidity0-80% RH, Non-Condensing
Storage Temperature-20~60?
Physical Properties
Weight2.15 kg ( 4.74 lb )
HousingMetal
Dimensions (L x W x H)20.00 x 32.30 x 4.40 cm
(7.87 x 12.72 x 1.73 in.)
Item no.: 60662T
This item will be ordered for you if required. Delivery time approx. 5-7 days.

New
ATEN AP206 2x 60W amplifier with DSP
ATEN AP206 is a dual-channel DSP-equipped amplifier that delivers 60 W per channel in a compact enclosure. The support for balanced / unbalanced line level inputs and the capability of driving 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems have made AP206 suit a wide range of public address applications. Configurable through an intuitive WebGUI, the built-in DSP allows Speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and extensive audio system protection purposes. Ground lift is deployed to eliminate unwanted hum noises from power circuit. Immersive sound experience is delivered with no compromise on power efficiency thanks to the amplifier’s Class-D design and ENERGY STAR qualification, conserving energy while lowering operational costs. Customizable Auto Standby mode enables the AP206 to automatically switch to “sleep” when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes.

Speaking of the system protection circuit, the AP206, along with the speakers connected to it, are prevented from damages led by shorted outputs, over / under-voltage, high frequency overload, and overtemperature. Plus, the amplifier will be muted when the heat sink temperature exceeds the limit. The fanless design avoids fan noise and prevents dust from building up inside the chassis.

Engineered to deliver the ultimate flexibility, the AP206 features an expansion slot for plugging in AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals. The amplifier can also be integrated with VK Control System via RS-232 and Ethernet connection for comprehensive control even from a distance. Mounting hardware is available for rack or surface-mounting depending on the installation needs. With a rich set of features, the AP206 assures reliable amplification with professional audio quality and high power efficiency for any enterprise-grade applications that require high quality sound reinforcement and distribution.
  • A dual-channel DSP-equipped amplifier that delivers 60 W per channel in a compact enclosure
  • Supports balanced / unbalanced line level inputs and drives 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems
  • Built-in WebGUI-configurable DSP allows speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and system protection
  • Ground lift deployed to eliminate unwanted noises from power circuit.
  • Class-D design with ENERGY STAR qualification for high power efficiency
  • Customizable Auto Standby mode – Amplifier automatically switches to “sleep” when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes
  • Integrated protection circuit – Protects the system from damages caused by Amp shortcut, Amp output over/under voltage, high frequency overload, and overtemperature
  • Amplifier will be muted when the heat sink temperature exceeds the limit
  • Fanless design – Avoids fan noise and prevents dust from building up
  • Expansion slot for add-on expansion card – Install AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals
  • Supports VK Control System via RS-232 and Ethernet connection
  • Supports rack or surface-mounting
  • Firmware upgradable
Package Contents
1x AP206 Power Amplifier with DSP
1x rack mount / surface mount kit
1x foot pad set (4 pcs)
2x 3-pin Euroblock connectors with strain relief (3.5mm)
1x 5-pin Euroblock connector with strain relief (3.5mm)
1x 4-pin Euroblock connector with screw lock (5.08mm)
1x 3-pin Euroblock connector (3.5mm)
1x power cord
1x user instructions

System Specification
Rated Power60Wrms / 120Wpeak per Channel @4O
120Wrms / 240Wpeak @70/100V Under Bridge Mode
DistortionTHD+N: <0.1%, 1kHz, 3dB before clipping
Frequency Response50~20kHz, +/-3dB @4O, 1W
SensitivityBalanced: +4dBu
Unbalanced: -10dBV
(0dBu=0.775Vrms, 0dBV=1Vrms)
Amplifier TypeClass D
Audio Inputs
Interfaces2 x 3-pin 3.5mm Euroblock (Bal/Unbal Line In)
ImpedanceBalanced: 20kO / Unbalanced: 10kO
Detect Threshold-50dBu
Audio Outputs
InterfacesLine Output: 1 x 5-pin 3.5mm Euroblock
Speaker Output: 1 x 4-pin 5.08mm Euroblock
ImpedanceLo-Z: 4O / Hi-Z: 70V (40O), 100V (80O)
Line Output: 600O
Audio EffectsBuilt-In DSP
ProtectionOutput Shortcut
AMP Output over/under voltage
High Frequency Overload
Thermal Protect
Communication
RS-232Connector: 3-pin, 3.5mm, Terminal Block
Baud rate and protocol:
Baud Rate: 19200, Data Bits: 8, Stop Bits:1, Parity: No, Flow Control: No
Compliance
CertificationFCC, CE, UKCA
Power
Maximum Input Power Rating100-240V~, 50/60Hz, 2A with PFC
Power ConsumptionAC110V:18.6W:87BTU
AC220V:18W:84BTU
Environmental
Operating Temperature0~50?
Humidity0-80% RH, Non-Condensing
Storage Temperature-20~60?
Physical Properties
Weight2.15 kg ( 4.74 lb )
HousingMetal
Dimensions (L x W x H)20.00 x 32.30 x 4.40 cm
(7.87 x 12.72 x 1.73 in.)
Item no.: 60662S
This item will be ordered for you if required. Delivery time approx. 5-7 days.

New
ATEN CE840 USB True 4K HDMI HDBaseT 3.0 KVM Extender
Adopting the latest HDBaseT 3.0 technology, CE840 USB True 4K HDMI HDBaseT 3.0 KVM Extender consists of a local unit and a remote unit, enabling uncompressed True 4K HDMI, audio, RS232, Ethernet, and USB signal transmission across 100m over a single Cat 6A cable (ATEN 2L-2920 Cat 6A Cable recommended) or above. Installation is made easy, neat, and cost-efficient with no compromises on high quality distribution of AV content. The CE840 allows for dual console operation via the two USB ports for USB keyboard and mouse connection and the pushbuttons for switching USB control console between the remote and local end. LEDs on the front panel help indicate which USB control mode that is currently on. Moreover, each unit contains an HDMI output port for local control and the other two USB 2.0 ports for USB peripheral connection. Consequently, operators can acquire data and manage equipment in one location, even from a distance.

The CE840 showcases excellent AV performance with no compression and zero latency. In addition to the support for HDR 10+, the extender is also capable of delivering video signals at up to True 4K (3840 x 2160 @ 60 Hz 4:4:4 and 4096 x 2160 @ 60 Hz 4:4:4) over 100 m. The extender also supports individual stereo audio and HDMI audio formats including LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio.

CE840 is an ideal solution for medium to large size applications that require uncompressed AV and control signal extension and remote access and control, including factories, warehouses, data centers, as well as medical and healthcare applications where precise visualization and accurate representation are essential.
  • HDBaseT 3.0 – supports True 4K HDMI, audio, RS232, Ethernet, and USB signal transmission across a long distance via a single Cat 6A cable (ATEN 2L-2920 Cat 6A Cable recommended) or above with no compression and zero latency
  • Superior video quality – supports HDR10+ and video resolutions up to True 4K (3840 x 2160 @ 60 Hz 4:4:4 and 4096 x 2160 @ 60 Hz 4:4:4) over 100 m
  • Dual console operation – control the system via the USB keyboard, mouse and HDMI monitor consoles installed on both the local and remote ends
  • Active console selectable via the pushbutton on the remote unit and local unit - enables USB-based signal control from either the remote or local end, with LEDs indicating the USB control mode
  • Flexible 4 x USB 2.0 extension – each of the remote unit and the local unit contains 2 ports for USB keyboard and mouse connection and 2 ports for other USB peripheral connection
  • Supports individual stereo audio and HDMI audio formats including LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio
  • HDCP2.3 and 2.2 compliant
  • Supports widescreen formats
  • Built-in 8KV/15KV ESD protection
  • Firmware upgradable
  • No software or driver installation required
  • Rack-mountable
Package Contents
1x CE840 USB True 4K HDMI HDBaseT 3.0 KVM Extender (Local Unit)
1x CE840 USB True 4K HDMI HDBaseT 3.0 KVM Extender (Remote Unit)
1x HDMI cable
1x microphone cable
1x speaker cable
1x USB Type-A to USB Type-B cable
2x Mounting kits
8x Foot pads
2x Power adapters and power cords
1x User instructions
Item no.: 61665L
This item will be ordered for you if required. Delivery time approx. 5-7 days.

New
ATEN EA1640 Temperature and Humidity Sensor
EA1640 serves as a compact, flexible humidity and temperature measuring solution for ATEN PG series PDU applications where precision is significant – from server rooms, data centers, hospitals, smart factories to green offices. The sensor contains 1 x RJ-45 input port, 1 x RJ-45 output port, and 1x RJ-11 input port for easy connection with PG PDU series and environmental sensors including EA1140, EA1240, and EA1340. One terminal block is built for combining EA1440 / EA1441 / EA1442 door sensor or EA1540 the capacitive leakage sensor. Up to 8 daisy-chained devices are supported to broaden applications.

Designed with the ultimate flexibility in mind, EA1640 can be placed at an ideal location as a result of the 1.5 m RJ-45 cable coming with it. In addition, it comes with a magnet for easy attachment to metallic surfaces. Rack mount kits are also included for quick installation inside racks.
  • A humidity and temperature measuring solution for ATEN PG PDU series
  • Precise relative humidity accuracy: ±7.5 % RH, 30 – 70 % RH; ±15 % RH, 15 – 40 % RH, 70 – 90 % RH
  • Highly accurate temperature measuring: ±1 °C (Max.), 10 – 40 °C; ±1.5 °C (Max.), –10 – 10 °C, 40 – 75 °C
  • Supports up to 8 daisy-chained devices
  • Multiple interfaces to broaden applications
    • 1 x RJ-45 input port, 1 x RJ-45 output port, and 1x RJ-11input port support connection with PG PDU series and EA1140 / EA1240 / EA1340 environmental sensors
    • 1 x terminal block supports EA1440 / EA1441 / EA1442 door sensor and EA1540 capacitive leakage sensor
  • Meets flexible installation purposes
    • Included 1.5 m RJ-45 cable for ideal location placement
    • Contains a magnet for sticking to metallic surfaces
    • Included rack mount kits enable quick installation inside racks
    • Overload protection prevents overheating of the protected equipment
  • LED indicator is visible through the enclosure
  • Prevents device malfunctions thanks to early detection in case of overheating / excessive humidity
  • Suitable for applications that require precise measuring, such as server rooms, data centers, hospitals, smartfactories, and green offices
Package Contents
1 x Temperature & Humidity Sensor
2 x Rack mount kits
1 x RJ45 Cable
1 x User Instructions

Electrical
Environment Sensor Ports1 Port Terminal Block for Door Sensor (EA1440/EA1441/EA1442)/ Capacitive Leakage Sensor (EA1540)
1 Port RJ-11 for Original Temperature Sensor (EA1140/EA1240/EA1340)
Measurement
RangeTemperature: –10 to +75 °C
Humidity: 0 to 100%
AccuracyTemperature:
±1°C (max), 10 to 40 °C
±1.5°C (max), –10 to 10 °C, 40 to 75 °C

Humidity:
±7.5% RH, 30–70% RH
±15% RH, 15–40% RH, 70–90% RH
Power ConsumptionDC12V:0.273W:1BTU
Environmental
Humidity (Operating & Storage)0 – 80% RH, Non-Condensing
Temperature (Operating / Storage)–10 to 75 °C / -20 – 70?
Physical Properties
Dimensions (L x W x H)10.44 x 3.57 x 2.14 cm
(4.11 x 1.41 x 0.84 in.)
Weight0.05 kg ( 0.11 lb )
Cable Length1.5M(RJ45+RJ45) round cable
HousingBlack Polycarbonate
Compliance
EMC VerificationEMC/FCC, Class A
Safety VerificationBy Request
LEDs
LED Indicator[Solid]: EA1640 is in working mode
[Fast Blinking (for 2 minutes)]: EA1640 receives the command “FindMe”.
[Slow Blinking (for 10 seconds)]: Over-current protection (OCP) is triggered, and the sensor(s) connected to EA1640 is going to power off.
[Slow Blinking]: Firmware upgrade of EA1640 is in progress.
Item no.: 16399H
This item will be ordered for you if required. Delivery time approx. 5-7 days.

New
ATEN ES0154 54-Port GbE Managed Switch
The ES0154 54-Port Layer 2+ Gigabit Ethernet Managed Switch is ideal for installation with ATEN KVM over IP products. It simplifies the process of building OT infrastructure with the ATEN KVM over IP series by eliminating the complexities of setup. It provides a high-performance 54-port configuration, a complete array of L2+ features, and advanced functionalities including Layer 3 static route, DHCP server, IPv6 support, and LLDP, making it a versatile solution for enhancing network performance. It offers a combination of SFP28 (fiber) and RJ-45 (copper) ports for servicing a range of network needs.

The ES0154 delivers 6 (1G/10G/25G) SFP28 and 48 (10M/100M/1G) RJ-45 ports.

Deploying the ES0154 is quick and hassle-free. Its plug-and-play design eliminates the need for software installation or device configuration. Just connect the transmitters and receivers to the ES0154 using Cat 5e/6 cables. With a full range of functions to help with optimizing network efficiency, manageability and reliability for their network environment, the ES0154 serves as an ideal network switch solution. It is particularly valuable in applications where connected devices play a critical role in network operation, including OT infrastructure for both SMBs and enterprises.
  • Supports plug-and-play with KE, VE89 series devices
  • Supports 48 Gigabit Ethernet ports and 6 SFP28 uplink ports (up to 25Gbps)
  • High-performance Gigabit Ethernet L2+ access switch with 396 Gbps switching capacity – significantly improve the responsiveness of applications and file transfer times
  • Supports IGMP v1/v2/v3 Snooping and IGMP v1/v2 Querier
  • Supports IGMP Snooping Fast Leave
  • Supports Flow Control
  • Comprehensive QoS – allowing the marking, classification, and scheduling of up to four traffic types across the network
  • Enhanced Security – Port Security limits the total number of devices using a switch port and protects against MAC flooding attacks
  • Supports IEEE 802.1w Rapid Spanning Tree Protocol – ensuring a faster recovery from failed links and enhancing overall network stability and reliability
  • Supports IPv4, IPv6
Package Contents
  • 1x ES0154 54-Port Layer 2+ Gigabit Ethernet Managed Switch
  • 1x power cord
  • 1x RJ-45 to DB-9 serial console cable
  • 1x grounding wire
  • 6x port dust covers
  • 1x mounting kit
  • 1x user instructions
Connectors
RJ-45 10/100/1000 Ports48
SFP28 Uplink Ports6
Console Ports1 x RJ45
Remote Console1 X RJ45
USB Port1
Performance
Switching Capacity396 Gbps
Forwarding Rate295 Mpps
Flash Memory256 MB
DRAM1GB
MAC Address Table Size32K
Jumbo Frames10 KB
Auto-negotiationYes
Maximum Input Power Rating100-240V AC,50-60Hz
Power Consumption54W (MAX) 177BTU
Environmental
Operating Temperature-5–45°C
Storage Temperature-40–70°C
Humidity5%–95% RH, Non-condensing
Physical Properties
Rack Space19"
HousingMetal
Weight4.68 kg ( 10.32 lb )
Dimensions (L x W x H)44.20 x 42.00 x 4.36 cm
(17.4 x 16.54 x 1.72 in.)
Carton Lot1 pc
Item no.: 32352B
This item will be ordered for you if required. Delivery time approx. 5-7 days.

New
ATEN ES0154P 54-Port GbE PoE Managed Switch
The ES0154P 54-Port Layer 2+ Gigabit Ethernet Managed Switch is ideal for installation with ATEN KVM over IP products. It simplifies the process of building OT infrastructure with the ATEN KVM over IP series by eliminating the complexities of setup. It provides a high-performance 54-port configuration, a complete array of L2+ features, and advanced functionalities including Layer 3 static route, DHCP server, IPv6 support, and LLDP, making it a versatile solution for enhancing network performance. It offers a combination of SFP28 (fiber) and RJ-45 (copper) ports for servicing a range of network needs.

The ES0154P supports 6 (1G/10G/25G) SFP28, 48 (10M/100M/1G) RJ-45 with PoE+ (Support 802.3at/af) ports, and PoE++ (Support 802.3bt) ports (41-48 ports only). The ES0154P is equipped with Power over Ethernet (PoE) functionality, featuring a substantial 740 Watts power budget distributed across its 48 RJ-45 ports. This eliminates the necessity for external power adapters and leads to a substantial reduction in power configuration expenses.

Deploying the ES0154P is quick and hassle-free. Its plug-and-play design eliminates the need for software installation or device configuration. Just connect the transmitters and receivers to the ES0154P using Cat 5e/6 cables. With a full range of functions to help with optimizing network efficiency, manageability and reliability for their network environment, the ES0154P serves as an ideal network switch solution. It is particularly valuable in applications where connected devices play a critical role in network operation, including OT infrastructure for both SMBs and enterprises.
  • Supports plug-and-play with KE, VE89 series devices
  • Supports 48 Gigabit Ethernet ports and 6 SFP28 uplink ports (up to 25Gbps)
  • High-performance Gigabit Ethernet L2+ access switch with 396 Gbps switching capacity – significantly improve the responsiveness of applications and file transfer times
  • 802.3af PoE / 802.3at PoE+ / 802.3bt PoE++ (41-48 ports only) port configuration and scheduling
  • Supports IGMP v1/v2/v3 Snooping and IGMP v1/v2 Querier
  • Supports IGMP Snooping Fast Leave
  • Supports Flow Control
  • Comprehensive QoS – allowing the marking, classification, and scheduling of up to four traffic types across the network
  • Enhanced Security – Port Security limits the total number of devices using a switch port and protects against MAC flooding attacks
  • Supports IEEE 802.1w Rapid Spanning Tree Protocol – ensuring a faster recovery from failed links and enhancing overall network stability and reliability
  • Supports IPv4, IPv6
Package Contents
  • 1x ES0154P 54-Port Layer 2+ Gigabit Ethernet Managed Switch with PoE
  • 1x power cord
  • 1x RJ-45 to DB-9 serial console cable
  • 1x grounding wire
  • 6x port dust covers
  • 1x mounting kit
  • 1x user instructions
Connectors
RJ-45 10/100/1000 Ports48
SFP28 Uplink Ports6
Console Ports1 x RJ45
Remote Console1 X RJ45
USB Port1
Performance
Switching Capacity396 Gbps
Forwarding Rate295 Mpps
Flash Memory256 MB
DRAM1GB
MAC Address Table Size32K
Jumbo Frames10 KB
Auto-negotiationYes
Maximum Input Power Rating100-240V AC,50-60Hz
Power Consumption835W (MAX) 2BTU
849BTU
Power over Ethernet (PoE)
Standard compliance802.3af PoE / 802.3at PoE+ / 802.3bt PoE++ (41-48 ports only)
Number of Ports That Support PoE/PoE+48 ports
Total PoE Power budget740W
Max. PoE Power budget per portPoE : 15.4W/ PoE+: 30W / PoE++: 90W(41-48 ports only)
Environmental
Operating Temperature-5–45°C
Storage Temperature-40–70°C
Humidity5%–95% RH, Non-condensing
Physical Properties
Rack Space19"
HousingMetal
Weight5.42 kg ( 11.94 lb )
Dimensions (L x W x H)44.20 x 42.00 x 4.36 cm
(17.4 x 16.54 x 1.72 in.)
Carton Lot1 pc
Item no.: 32352Q
This item will be ordered for you if required. Delivery time approx. 5-7 days.

New
ATEN KG0016 OmniBus Gateway with 16-Port KVM over IP
The KG0016 16-Port KVM over IP OmniBus Gateway provides remote over IP access, allowing users to access, monitor, and control up to 16 servers over a network. With KG0016 independent remote connections, it ensures higher operation efficiency and optimizes the user experience by eliminating waiting time and bus sharing. This single management platform connects servers through a single secure portal, simplifying access and control for efficient administration. With its all digital KVM over IP architecture, the KG0016 prevents video lagging and freezing, ensuring stable and smooth video display, particularly in long-distance extension application. Equipped with dual on-board 10G NICs for redundancy, this series is built to guarantee reliability and availability of remote access to all servers. The virtual media transmissions are faster than traditional KVM over IP switches, allowing for the completion of a 1GB file transmission in just one minute. When the KG series works with the KVM DigiProcessor series (KG1900T / KG6900T / KG8900T / KG9900T), it delivers superior video resolutions up to 1920 x 1200 @ 60 Hz, for distances up to 100 meters over a single Cat 5e/6 cable.

The KG series can be remotely accessed via WinClient AP or HTML5 WebClient* at a console from a separate location for management and operation. The WinClient AP comes with complete KVM functions and provides users with continuous, reliable connections. It can help users to simultaneously monitor the status of all connected servers on Array View and control a specific server through Control View. For basic KVM functions, users can directly access and control one of the ports through the HTML5 WebClient by simply launching a client viewer from a browser, without the need for pre-installed software. Additionally, it allows users to easily separate the client viewer from the browser and drag it to a second monitor for control while monitoring the status of all ports on the Port View from Web GUI.

This KVM over IP OmniBus Gateway allows out-of-band access to connected servers from remote consoles via the management network for BIOS-level troubleshooting when the production network is down. It enables IT administrators to manage servers via management networks that are separated from the main / production networks. If there’s difficulty in accessing the servers through the production network, administrators can still access servers via KG series. To provide stringent security, the KG series offers TLS 1.3 and an embedded FIPS 140-2 certified OpenSSL cryptographic module. Security features of the KG series include 256-bit AES encryption for secured data transmissions, as well as RADIUS, LDAP, LDAPS, and MS Active Directory for 3rd-party authentication services.

Additional exclusive features of KG series include a Message Board, Panel Array Mode™ Live+, Mouse DynaSync™, and a front panel LCD display. ATEN KVM over IP OmniBus Gateway saves users time and money by enabling administrators to manage their servers from virtually anywhere – minimizing travel and MTTR (Mean Time to Repair) costs, ensuring the highest availability for data center services.

Note:
We recommend using the WinClient app for more robust management and control. Performance and usage may vary depending on the user’s hardware configuration. A minimum of 8 GB RAM, dual core CPU, and a graphics card that supports OpenGL are required. Please also make sure that the browser used is up to date.

Hardware
  • High port density – RJ-45 connectors and Cat 5e / 6 cable for up to 16 ports in 1U housing
  • All-digital KVM over IP optimum transmission – offers reliable transmission over long distances with noise immunity, signal quality preservation, and efficient compression and storage
  • Extends 1920 x 1200 @ 60 Hz resolutions up to 100m via Cat 5e/6 without signal interference and close-to-zero latency
  • Up to 16 independent connections for remote KVM over IP access
  • Dual 10G NICs for redundant LAN or two IP operation
  • LCD display – provides real-time connection status, notifications, and system alert message
  • LED indication of connection and hardware status
  • Multi-platform server environments: Windows, Mac, and Linux
  • All-around ventilation chassis design improves airflow efficiency – induces cold air suction on both sides at the front panel and dissipates heat via ventilation holes on the back panel
  • Dual power supply with power redundancy
Management
  • Simultaneously shares 16 independent connections to the attached servers
  • Out-of-Band access
  • Green IT Fan – auto-fan-speed adjustment corresponding to temperature
  • Event logging and Windows-based log server
  • Event notification – supports notification of SMTP email, SNMP Trap, and SMS (with additional mobile devices)
  • Event destination – event logs will be saved to Log server, Syslog server, and USB drive
  • Firmware upgradeable
  • Port share mode – allows multiple users to gain access to a server simultaneously
  • Supports IPv4, IPv6
Easy-to-Use Interface
  • The intuitive WinClient AP's supports of an Array View and a Control View – enables users to monitor all servers and control a specific server concurrently
  • Panel Array Mode™ Live+ – real-time monitoring of livestreamed video feeds from all ports in a configurable multiscreen layout
  • Browser-based, and AP GUIs offer a unified multi-language interface to minimize user training time and increase productivity
  • Multiplatform client support (Windows, Mac OS X, and Linux) via WebClient
  • Multi-browser support – Edge, Chrome, Firefox, Safari, and Opera
  • Supports web-friendly KVM-over-IP access with HTML5 WebClient viewer – users can remotely access all the connected servers and PCs without Java or browser plug-in installation
  • Full-screen or sizable and scalable virtual remote desktop
  • Keyboard / mouse broadcast – keyboard and mouse signals can be duplicated across all servers simultaneously
Security
  • High-grade security – supports an embedded FIPS 140-2 certified OpenSSL cryptographic module (Certificate #4282)
  • Remote authentication support: RADIUS, LDAP, LDAPS, and MS Active Directory
  • Supports TLS 1.3 data encryption and RSA 2048-bit certificates to secure user logins in from browser
  • Flexible encryption design allows users to choose any combination of 56-bit DES, 168-bit 3DES, 256-bit AES, 128-bit RC4, or random for video, and virtual media data encryption
  • Support for IP / MAC filter
  • Configurable user and group permissions for server access and control
  • Automated CSR creation utility and third party CA certificate authentication
Virtual Media
  • Virtual media transmission rate is approximately 10 times faster than traditional KVM, ideally for file transfers, OS patching, software installation, and diagnostic testing
  • Works with USB-enabled servers in operating system and at the BIOS level
  • Supports USB2.0 DVD / CD drives, USB mass storage devices, PC hard drives, and ISO images
Virtual Remote Desktop
  • Video quality such as monochrome color depth and bandwidth’s increment / decrement can be adjusted for optimizing data transfer speed
  • Mouse DynaSync™ – automatically synchronizes remote mouse movements
  • On-screen keyboard with multi-language support
  • BIOS-level access for troubleshooting
Content of delivery
  • 1x KG0016 16-Port KVM over IP OmniBus Gateway
  • 1x Footpad set (4 pcs)
  • 1x Mounting kit
  • 2x Control terminal blocks
  • 2x Power cords
  • 2x Lok-U-Plugs
  • 1x Lok-U-Plug installation tool
  • 1x User instructions
Console Connections
LocalN/A
Remote16
Computer Connections
Direct16
Port SelectionGUI
Connectors
USB Port2 x USB Type-A Female (Reserved for future expansion)
KVM Ports32 x RJ-45 Female
SFP+ Uplink Ports2 x SFP+ Slots
Serial2 x RJ-45 Female (Reserved for future expansion)
Power2 x IEC 60320/C14
Input2 x 2-pin DI (Reserved for future expansion)
Relay2 x 3-pin Relay (Reserved for future expansion)
Switches
Reset1 x Semi-recessed Pushbutton
Power2 x Rocker Switches
LEDs
KVM Ports16 (Green)
Power2 (Green)
Panel Spec
Size1.6"
Resolution128x64
Pushbuttons
Select3 x Pushbuttons (Up, Down, Enter)
Emulation
Keyboard / MouseUSB
Video
Remote1920 x 1200 @ 60Hz
Maximum Input Power Rating100–240V~, 2.5A max, 50-60Hz
Power ConsumptionAC110V:46.8W:160BTU
AC220V:46.9W:160BTU
Environmental
Operating Temperature0 - 40°C
Storage Temperature-20 - 60°C
Humidity10 - 80% RH, Non-condensing
Physical Properties
HousingMetal
Weight6.53 kg ( 14.38 lb )
Dimensions (L x W x H)43.36 x 37.90 x 4.40 cm
Item no.: 62638H
This item will be ordered for you if required. Delivery time approx. 5-7 days.

New
ATEN KG0032 OmniBus Gateway with 32-Port KVM over IP
The KG0032 32-Port KVM over IP OmniBus Gateway provides remote over IP access, allowing users to access, monitor, and control up to 32 servers over a network. With KG0032 independent remote connections, it ensures higher operation efficiency and optimizes the user experience by eliminating waiting time and bus sharing. This single management platform connects servers through a single secure portal, simplifying access and control for efficient administration. With its all digital KVM over IP architecture, the KG0032 prevents video lagging and freezing, ensuring stable and smooth video display, particularly in long-distance extension application. Equipped with dual on-board 10G NICs for redundancy, this series is built to guarantee reliability and availability of remote access to all servers. The virtual media transmissions are faster than traditional KVM over IP switches, allowing for the completion of a 1GB file transmission in just one minute. When the KG series works with the KVM DigiProcessor series (KG1900T / KG6900T / KG8900T / KG9900T), it delivers superior video resolutions up to 1920 x 1200 @ 60 Hz, for distances up to 100 meters over a single Cat 5e/6 cable.

The KG series can be remotely accessed via WinClient AP or HTML5 WebClient* at a console from a separate location for management and operation. The WinClient AP comes with complete KVM functions and provides users with continuous, reliable connections. It can help users to simultaneously monitor the status of all connected servers on Array View and control a specific server through Control View. For basic KVM functions, users can directly access and control one of the ports through the HTML5 WebClient by simply launching a client viewer from a browser, without the need for pre-installed software. Additionally, it allows users to easily separate the client viewer from the browser and drag it to a second monitor for control while monitoring the status of all ports on the Port View from Web GUI.

This KVM over IP OmniBus Gateway allows out-of-band access to connected servers from remote consoles via the management network for BIOS-level troubleshooting when the production network is down. It enables IT administrators to manage servers via management networks that are separated from the main / production networks. If there’s difficulty in accessing the servers through the production network, administrators can still access servers via KG series. To provide stringent security, the KG series offers TLS 1.3 and an embedded FIPS 140-2 certified OpenSSL cryptographic module. Security features of the KG series include 256-bit AES encryption for secured data transmissions, as well as RADIUS, LDAP, LDAPS, and MS Active Directory for 3rd-party authentication services.

Additional exclusive features of KG series include a Message Board, Panel Array Mode™ Live+, Mouse DynaSync™, and a front panel LCD display. ATEN KVM over IP OmniBus Gateway saves users time and money by enabling administrators to manage their servers from virtually anywhere – minimizing travel and MTTR (Mean Time to Repair) costs, ensuring the highest availability for data center services.

Note:
We recommend using the WinClient app for more robust management and control. Performance and usage may vary depending on the user’s hardware configuration. A minimum of 8 GB RAM, dual core CPU, and a graphics card that supports OpenGL are required. Please also make sure that the browser used is up to date.

Hardware
  • High port density – RJ-45 connectors and Cat 5e / 6 cable for up to 32 ports in 1U housing
  • All-digital KVM over IP optimum transmission – offers reliable transmission over long distances with noise immunity, signal quality preservation, and efficient compression and storage
  • Extends 1920 x 1200 @ 60 Hz resolutions up to 100m via Cat 5e/6 without signal interference and close-to-zero latency
  • Up to 32 independent connections for remote KVM over IP access
  • Dual 10G NICs for redundant LAN or two IP operation
  • LCD display – provides real-time connection status, notifications, and system alert message
  • LED indication of connection and hardware status
  • Multi-platform server environments: Windows, Mac, and Linux
  • All-around ventilation chassis design improves airflow efficiency – induces cold air suction on both sides at the front panel and dissipates heat via ventilation holes on the back panel
  • Dual power supply with power redundancy
Management
  • Simultaneously shares 32 independent connections to the attached servers
  • Out-of-Band access
  • Green IT Fan – auto-fan-speed adjustment corresponding to temperature
  • Event logging and Windows-based log server
  • Event notification – supports notification of SMTP email, SNMP Trap, and SMS (with additional mobile devices)
  • Event destination – event logs will be saved to Log server, Syslog server, and USB drive
  • Firmware upgradeable
  • Port share mode – allows multiple users to gain access to a server simultaneously
  • Supports IPv4, IPv6
Easy-to-Use Interface
  • The intuitive WinClient AP's supports of an Array View and a Control View – enables users to monitor all servers and control a specific server concurrently
  • Panel Array Mode™ Live+ – real-time monitoring of livestreamed video feeds from all ports in a configurable multiscreen layout
  • Browser-based, and AP GUIs offer a unified multi-language interface to minimize user training time and increase productivity
  • Multiplatform client support (Windows, Mac OS X, and Linux) via WebClient
  • Multi-browser support – Edge, Chrome, Firefox, Safari, and Opera
  • Supports web-friendly KVM-over-IP access with HTML5 WebClient viewer – users can remotely access all the connected servers and PCs without Java or browser plug-in installation
  • Full-screen or sizable and scalable virtual remote desktop
  • Keyboard / mouse broadcast – keyboard and mouse signals can be duplicated across all servers simultaneously
Security
  • High-grade security – supports an embedded FIPS 140-2 certified OpenSSL cryptographic module (Certificate #4282)
  • Remote authentication support: RADIUS, LDAP, LDAPS, and MS Active Directory
  • Supports TLS 1.3 data encryption and RSA 2048-bit certificates to secure user logins in from browser
  • Flexible encryption design allows users to choose any combination of 56-bit DES, 168-bit 3DES, 256-bit AES, 128-bit RC4, or random for video, and virtual media data encryption
  • Support for IP / MAC filter
  • Configurable user and group permissions for server access and control
  • Automated CSR creation utility and third party CA certificate authentication
Virtual Media
  • Virtual media transmission rate is approximately 10 times faster than traditional KVM, ideally for file transfers, OS patching, software installation, and diagnostic testing
  • Works with USB-enabled servers in operating system and at the BIOS level
  • Supports USB2.0 DVD / CD drives, USB mass storage devices, PC hard drives, and ISO images
Virtual Remote Desktop
  • Video quality such as monochrome color depth and bandwidth’s increment / decrement can be adjusted for optimizing data transfer speed
  • Mouse DynaSync™ – automatically synchronizes remote mouse movements
  • On-screen keyboard with multi-language support
  • BIOS-level access for troubleshooting
Content of delivery
  • 1x KG0032 32-Port KVM over IP OmniBus Gateway
  • 1x Footpad set (4 pcs)
  • 1x Mounting kit
  • 2x Control terminal blocks
  • 2x Power cords
  • 2x Lok-U-Plugs
  • 1x Lok-U-Plug installation tool
  • 1x User instructions
Console Connections
LocalN/A
Remote32
Computer Connections
Direct32
Port SelectionGUI
Connectors
USB Port2 x USB Type-A Female (Reserved for future expansion)
KVM Ports32 x RJ-45 Female
SFP+ Uplink Ports2 x SFP+ Slots
Serial2 x RJ-45 Female (Reserved for future expansion)
Power2 x IEC 60320/C14
Input2 x 2-pin DI (Reserved for future expansion)
Relay2 x 3-pin Relay (Reserved for future expansion)
Switches
Reset1 x Semi-recessed Pushbutton
Power2 x Rocker Switches
LEDs
KVM Ports32 (Green)
Power2 (Green)
Panel Spec
Size1.6"
Resolution128x64
Pushbuttons
Select3 x Pushbuttons (Up, Down, Enter)
Emulation
Keyboard / MouseUSB
Video
Remote1920 x 1200 @ 60Hz
Maximum Input Power Rating100–240V~, 2.5A max, 50-60Hz
Power ConsumptionAC110V:46.8W:160BTU
AC220V:46.9W:160BTU
Environmental
Operating Temperature0 - 40°C
Storage Temperature-20 - 60°C
Humidity10 - 80% RH, Non-condensing
Physical Properties
HousingMetal
Weight6.53 kg ( 14.38 lb )
Dimensions (L x W x H)43.36 x 37.90 x 4.40 cm
Item no.: 62638G
This item will be ordered for you if required. Delivery time approx. 5-7 days.

New
ATEN KG1900T USB-VGA-KVM-DigiProcessor
The KG1900T USB VGA KVM DigiProcessor can centrally connect from the KVM over IP OmniBus Gateway to the target computer. Its digital signal delivers superior signal compensation for greatly enhanced video quality up to 1920 x 1200 @ 60 Hz, 24-bit color depth and raises the data transfer rate faster than traditional KVM solutions. This plug and play KVM DigiProcessor is built with a powerful SoC that provides excellent video compression performance. Its zero-U and light weight design allows for an efficient and tidy installation, providing an ideal space-saving solution. The KVM DigiProcessor is perfectly suited to data center, server room, control room and high tech production line applications.

Note: The ATEN KVM DigiProcessor is only compatible with KG0016 / KG0032. Make sure the KG0016 / KG0032 and the KVM DigiProcessor are connected directly with each other and there is no network switch in between. The SP port on the ATEN DigiProcessor is reserved for future expansion
  • Superior video quality – supports resolutions up to 1920 x 1200 @ 60 Hz; 24-bit color depth
  • Distortion-free dynamic video performance up to 100m via a Cat 5e/6 cable
  • Virtual Media supports fast transmission speeds up to Read 265Mbps / Write 188Mbps
  • Space saving – 0U and compact design with SR mounting hanger for organized server rack installation
  • Light-weight aluminum die casting shroud – enhanced passive cooling design with streamlining stripe all around the shroud to help quick radiation
  • Bus-powered – no external power adapter required with ultra-low power consumption*
  • Firmware upgradable
Note: Make sure to connect both USB connectors to the server's USB ports to ensure sufficient power supply.

Connectors
Link1 x RJ-45 Female (KVM)
1 x RJ-45 Female (SP) (Reserved for future expansion)
Computer2 x USB Type A Male
1 x HDB-15 Male
Switches
Reset1 x Semi-recessed Pushbutton
LEDs
Link1 (Green)- On: Active / Blinking: Transmit/Receive)
10/100/1000 Mbps1 (Off / Orange / Green)
Power1 (Green)
Power ConsumptionDC5V:4.73W:22BTU
Environmental
Operating Temperature0–40°C
Storage Temperature-20–60°C
Humidity0–95% RH, Non-condensing
Physical Properties
HousingAluminum Die-casting Housing
Weight0.30 kg ( 0.66 lb )
Dimensions (L x W x H)12.20 x 5.80 x 2.58 cm
Item no.: 62638I
This item will be ordered for you if required. Delivery time approx. 5-7 days.

Get Electronic Accessories from A to Z at INTOS

Wide Selection at Fair Prices with INTOS ELECTRONIC AG

Specialist retailers, system houses and industrial customers buy electronic accessories for the IT sector as well as for smartphones and tablets from INTOS ELECTRONIC AG. Our products impress with their quality and price. This price-performance ratio also convinces your customers. As a manufacturer and distributor, INTOS ELECTRONIC AG, based in Giessen, guarantees consistently high standards of certified branded products. The total range comprises over 6,000 items and offers electronic accessories from various areas. The InLine® own brand alone contains 4,500 products and, in addition to an extensive selection of cables such as patch cables, network cables and HDMI cables, has something to suit everyone. Do you already know what you need? Then you will find what you are looking for on our site. For everyone else, the InLine® website provides informative information about all the items in our complete range to help you make your decision. If you have any questions about an InLine® cable from Intos or another product, you can get the right answers from our experts in our live support with chat functions.

Electronic Accessories for Your Customers: The Complete Package from One Source

Reliable IT and electronic accessories are essential to ensure that your customers' IT systems run smoothly. We offer everything your customers need, from Bluetooth accessories, KVM switches and UPS systems to various cables such as USB cables, audio cables and network cables. All cables, from network cables to HDMI cables, also need to be well concealed. To avoid cable clutter and tripping hazards, you will also find a network cabinet in our range in which all cables are protected. You can organise your customers' workstations with our wall mounts, cable ducts and accessories for optimum workstation ergonomics. More and more companies are focussing on mobile working, and to ensure that tablets and smartphones can also be used effectively outside the office, INTOS ELECTRONIC AG has all the smartphone and tablet accessories you need. With us, you get everything from a single source and don't have to deal with different contact points. Click through our extensive range of electronic accessories and quickly find the right product for your customers' needs.

We Are Your Online Shop for Electronic Accessories and Cables: Order from the Specialist

The electronic that surround us can only work if their connection paths are intact - we have been your specialist for cables of all kinds since 1991. The InLine® cables from Intos stand for a high standard of quality. We guarantee a long service life and ensure that customers can enjoy their products for a long time. As a manufacturer and distributor, we therefore specialise in cables and offer a complete range with a particularly wide spectrum. In addition to an extensive range of cables and adapters, the InLine® range also includes products such as socket strips, wall and ceiling mounts, tools and other accessories that make life and work easier for your customers. And InLine® connects beyond the cable: For an attractive and standardised presentation of goods in specialist shops, we offer shop wall solutions that showcase your products even better. This means that all products are clearly organised in one place and your customers can find what they need straight away. The INTOS ELECTRONIC AG team looks forward to receiving your order and will be happy to help with any questions you may have!

INTOS is Here for You: Comprehensive Service Offerings

Our comprehensive services range from information for new customers or advertising material service to shipping conditionscontent integration, returns or old cable returns. A good brand presence is the key to success, which is why we offer you high-quality content that you can integrate. This includes detailed product data and high-resolution product images. Would you like to make your customers or employees happy? With your logo on an InLine® product such as a power bank or USB stick, you can use it as a promotional item or gift. You will find the right product for every requirement in our versatile range of electronic accessories. 

We are known for our customer proximity and personal support with dedicated contact persons. With six sales offices in Germany and one in Italy, we have a high sales density so that we can also reach you quickly! Feel free to contact us by phone, e-mail or arrange an appointment at your premises - we'll be happy to visit you! Stay up to date: Sign up for our newsletter to be informed about new products or promotions.